Influence of heat treatment on the high-cycle fatigue properties and fatigue damage mechanism of selective laser melted AlSi10Mg alloy

Effect of direct aging on the microstructure and tensile properties of AlSi10Mg alloy manufactured by selective laser melting process

(2021) Tae-Hyun Park et al.   MATERIALS CHARACTERIZATION

Milling parameters of Al-Cu and Al-Si cast alloys

(2019) M. Hamed et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Fatigue life prediction for AlSi10Mg components produced by selective laser melting

(2019) Ming Tang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Structure-property relationship in high strength and lightweight AlSi10Mg microlattices fabricated by selective laser melting

(2019) Tianyu Yu et al.   MATERIALS & DESIGN

Quantitative relationship between microstructure characteristics and fatigue parameters of A319 casting alloy

(2019) Bin Ge et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength

(2018) S. Romano et al.   ENGINEERING FRACTURE MECHANICS

Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg

(2018) Changchun Zhang et al.   INTERNATIONAL JOURNAL OF FATIGUE

Investigation on Selective Laser Melting AlSi10Mg Cellular Lattice Strut: Molten Pool Morphology, Surface Roughness and Dimensional Accuracy

(2018) Xuesong Han et al.   Materials

Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis

(2018) Shiwen Liu et al.   MATERIALS & DESIGN

On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing

(2018) Sara Bagherifard et al.   MATERIALS & DESIGN

Effect of scanning strategy on texture formation in Ni-25 at.%Mo alloys fabricated by selective laser melting

(2018) Shi-Hai Sun et al.   MATERIALS & DESIGN

Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy

(2017) Shafaqat Siddique et al.   INTERNATIONAL JOURNAL OF FATIGUE

Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting

(2017) Ming Tang et al.   INTERNATIONAL JOURNAL OF FATIGUE

A study of the microstructure and the mechanical properties of an Al Si Ni alloy produced via selective laser melting

(2017) Alberta Aversa et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Low temperature annealing dedicated to AlSi10Mg selective laser melting products

(2017) J. Fiocchi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM

(2017) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments

(2017) Naoki Takata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)

(2017) Naor Elad Uzan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition

(2017) Mingming Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of heat treatment on tensile and fatigue deformation behavior of extruded Al-12 wt%Si alloy

(2017) Gi-Su Ham et al.   METALS AND MATERIALS INTERNATIONAL

Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus

(2017) Takuya Ishimoto et al.   SCRIPTA MATERIALIA

Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment

(2017) Xueping Ding et al.   Journal of Manufacturing Processes

Qualification of AM parts: Extreme value statistics applied to tomographic measurements

(2017) S. Romano et al.   MATERIALS & DESIGN

Microstructure and strength of selectively laser melted AlSi10Mg

(2016) J. Wu et al.   ACTA MATERIALIA

Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction

(2016) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties

(2016) Nesma T. Aboulkhair et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

(2016) Wei Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment

(2016) Nesma T. Aboulkhair et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies

(2016) Fabian Geiger et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality

(2016) Nesma T. Aboulkhair et al.   MATERIALS & DESIGN

Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development

(2016) U. Tradowsky et al.   MATERIALS & DESIGN

The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting

(2016) Heng Rao et al.   MATERIALS & DESIGN

Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts

(2016) Di Wang et al.   MATERIALS & DESIGN

Selective laser melting of stainless steel 316L with low porosity and high build rates

(2016) Zhongji Sun et al.   MATERIALS & DESIGN

Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg

(2015) Christian Weingarten et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development

(2015) Noriko Read et al.   MATERIALS & DESIGN

On the direct aging of iron based superalloy hot rolled plates

(2015) S. Chenna Krishna et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature

(2015) Lorella Ceschini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)

(2015) Karsten Kunze et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the Precipitation Hardening of Selective Laser Melted AlSi10Mg

(2015) Nesma T. Aboulkhair et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

High temperature tensile deformation behavior and failure mechanisms of an Al–Si–Cu–Mg cast alloy — The microstructural scale effect

(2015) Mohammadreza Zamani et al.   MATERIALS & DESIGN

Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation

(2014) K. Kempen et al.   MATERIALS SCIENCE AND TECHNOLOGY

Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting

(2014) Pan Ma et al.   Metals

Role of eutectic silicon particles in fatigue crack initiation and propagation and fatigue strength characteristics of cast aluminum alloy A356

(2013) Lei Zeng et al.   ENGINEERING FRACTURE MECHANICS

Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment

(2013) K.G. Prashanth et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder

(2012) Lore Thijs et al.   ACTA MATERIALIA

General relation between tensile strength and fatigue strength of metallic materials

(2012) J.C. Pang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior

(2011) Erhard Brandl et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of an Al–12.7Si–0.7Mg alloy processed by extrusion and heat treatment

(2011) Fang Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A study of the microstructural evolution during selective laser melting of Ti–6Al–4V

(2010) Lore Thijs et al.   ACTA MATERIALIA

Prediction of the S–N curves of high-strength steels in the very high cycle fatigue regime

(2010) Y.B. Liu et al.   INTERNATIONAL JOURNAL OF FATIGUE

Very high cycle fatigue – Is there a fatigue limit?

(2010) B. Pyttel et al.   INTERNATIONAL JOURNAL OF FATIGUE

Very high cycle fatigue properties of bainitic high carbon–chromium steel under variable amplitude conditions

(2009) H. Mayer et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of trace La addition on the microstructures and mechanical properties of A356 (Al–7Si–0.35Mg) aluminum alloys

(2009) Yu-Chou Tsai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of surface porosity on the fatigue strength of AE425 and PM390 hypereutectic Al–Si casting alloys at medium and elevated temperatures

(2007) H.R. Ammar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation kinetics of Si in aluminium alloys

(2007) Fernando Lasagni et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING