Microstructures and mechanical properties of laser melting deposited Ti6Al4V/316L functional gradient materials

3D-printing process design of lattice compressor impeller based on residual stress and deformation

(2020) Dejun JIA et al.   Scientific Reports

Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry

(2020) Weiwei Zhu et al.   ACTA MATERIALIA

Effect of laser shock processing on oxidation resistance of laser additive manufactured Ti6Al4V titanium alloy

(2020) Wei Guo et al.   CORROSION SCIENCE

Microstructures and mechanical properties of Ti6Al4V-Ti48Al2Cr2Nb alloys fabricated by laser melting deposition of powder mixtures

(2020) Ruixin Ma et al.   MATERIALS CHARACTERIZATION

Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI

(2020) Xingchen Yan et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure evolution and high temperature resistance of Ti6Al4V/Inconel625 gradient coating fabricated by laser melting deposition

(2020) Zhonggang Sun et al.   MATERIALS & DESIGN

Mechanical properties and electrochemical corrosion resistance of multilayer laser cladded Fe-based composite coatings on 4Cr5MoSiV1 steel

(2020) X. Xu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Influence of composition gradient variation on the microstructure and mechanical properties of 316 L/Inconel718 functionally graded material fabricated by laser additive manufacturing

(2020) Yi Su et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Improved corrosive wear resistance of carbidic austempered ductile iron by addition of Cu

(2020) Penghui Yang et al.   MATERIALS CHARACTERIZATION

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

(2019) M.J. Bermingham et al.   ACTA MATERIALIA

Interfacial characterization and mechanical properties of 316L stainless steel/inconel 718 manufactured by selective laser melting

(2019) Xinliang Mei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure homogenizations of Ti-6Al-4V alloy manufactured by hybrid selective laser melting and laser deposition manufacturing

(2019) L.Y. Qin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An investigation on the effect of powder recycling on the microstructure and mechanical properties of AISI 316L produced by Directed Energy Deposition

(2019) Abdollah Saboori et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Numerical and experimental investigation on laser metal deposition as repair technology for 316L stainless steel

(2019) M.J. Zhan et al.   OPTICS AND LASER TECHNOLOGY

Laser additive manufacturing of TA15 - Inconel 718 bimetallic structure via Nb/Cu multi-interlayer

(2019) Chun Shang et al.   VACUUM

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

(2019) Jinzhong Lu et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Microstructural tailoring of As-Selective Laser Melted Ti6Al4V alloy for high mechanical properties

(2019) Yangli Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Additive manufacturing of a functionally graded material from Inconel625 to Ti6Al4V by laser synchronous preheating

(2019) Wei Meng et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Development and characterization of 316L/Inconel625 functionally graded material fabricated by laser direct metal deposition

(2019) Bo Chen et al.   OPTICS AND LASER TECHNOLOGY

Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures

(2018) L.J. Wu et al.   APPLIED SURFACE SCIENCE

Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section

(2018) Lourdes D. Bobbio et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Refining As-cast β-Ti Grains Through ZrN Inoculation

(2018) Dong Qiu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Graphene Nanoplatelets on Microstructure and Mechanical Properties of AlSi10Mg Nanocomposites Produced by Hot Extrusion

(2018) A. Saboori et al.   POWDER METALLURGY AND METAL CERAMICS

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Effect of Cr 3 C 2 content on 316L stainless steel fabricated by laser melting deposition

(2018) S. Wang et al.   VACUUM

An Overview of Key Challenges in the Fabrication of Metal Matrix Nanocomposites Reinforced by Graphene Nanoplatelets

(2018) Abdollah Saboori et al.   Metals

Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting

(2018) Mingkang Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additive manufacturing of Ti6Al4V alloy: A review

(2018) Shunyu Liu et al.   MATERIALS & DESIGN

A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition

(2017) Mingming Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The influences of melting degree of TiC reinforcements on microstructure and mechanical properties of laser direct deposited Ti6Al4V-TiC composites

(2017) Shunyu Liu et al.   MATERIALS & DESIGN

Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling

(2016) Beth E. Carroll et al.   ACTA MATERIALIA

Microstructure and mechanical properties of LMD–SLM hybrid forming Ti6Al4V alloy

(2016) Qi Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Compound technology of manufacturing and multiple laser peening on microstructure and fatigue life of dual-phase spring steel

(2016) S. Prabhakaran et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing

(2016) Ashley Reichardt et al.   MATERIALS & DESIGN

Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding

(2015) Qunshuang Ma et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing

(2015) T. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Eigenstrain simulation of residual stresses induced by laser shock processing in a Ti6Al4V hip replacement

(2015) C. Correa et al.   MATERIALS & DESIGN

Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis

(2014) J. Michael Wilson et al.   JOURNAL OF CLEANER PRODUCTION

Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy

(2014) U. Trdan et al.   MATERIALS CHARACTERIZATION

Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5Zr and Mg–10Gd–3Y–0.5Zr magnesium alloys by shot peening

(2013) Wencai Liu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructure and mechanical properties in TIG welding of CLAM steel

(2011) Qiang Zhu et al.   FUSION ENGINEERING AND DESIGN

Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts

(2010) J.Z. Lu et al.   ACTA MATERIALIA