Enhanced performance of high temperature polymer electrolyte membrane fuel cell using a novel dual catalyst layer structured cathode

Highly Stable Spinel Oxide Cathode for Rechargeable Li–O2 Batteries in Non-Aqueous Liquid and Gel-Based Electrolytes

(2021) Keerti M. Naik   ACS Applied Energy Materials

Two-dimensional oxygen-deficient TiO2 nanosheets-supported Pt nanoparticles as durable catalyst for oxygen reduction reaction in proton exchange membrane fuel cells

(2020) Keerti M. Naik et al.   JOURNAL OF POWER SOURCES

Enhanced durability of Pt-based electrocatalyst in high temperature polymer electrolyte membrane fuel cell using graphitic carbon nitride nanosheet support

(2020) Weiqi Zhang et al.   ACS Sustainable Chemistry & Engineering

Synthesis and properties of phosphonated polysulfones for durable high-temperature proton exchange membranes fuel cell

(2020) Hongying Tang et al.   JOURNAL OF MEMBRANE SCIENCE

Membrane electrode assemblies for PEM fuel cells: A review of functional graded design and optimization

(2019) Lei Xing et al.   ENERGY

Achieving high Pt utilization and superior performance of high temperature polymer electrolyte membrane fuel cell by employing low-Pt-content catalyst and microporous layer free electrode design

(2019) Dongmei Yao et al.   JOURNAL OF POWER SOURCES

Ten-fold reduction from the state-of-the-art platinum loading of electrodes prepared by electrospraying for high temperature proton exchange membrane fuel cells

(2018) S. Martin et al.   ELECTROCHEMISTRY COMMUNICATIONS

Catalyst evaluation for oxygen reduction reaction in concentrated phosphoric acid at elevated temperatures

(2018) Yang Hu et al.   JOURNAL OF POWER SOURCES

Nitrogen-doped porous carbon derived from ZIF-8 as a support of electrocatalyst for enhanced oxygen reduction reaction in acidic solution

(2018) Shi Xue et al.   Journal of the Taiwan Institute of Chemical Engineers

Two-step oxygen reduction on spinel NiFe2O4 catalyst: Rechargeable, aqueous solution- and gel-based, Zn-air batteries

(2018) Keerti M. Naik et al.   ELECTROCHIMICA ACTA

In-situ diagnosis on performance degradation of high temperature polymer electrolyte membrane fuel cell by examining its electrochemical properties under operation

(2018) Dongmei Yao et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Investigation of parameter effects on the performance of high-temperature PEM fuel cell

(2018) Lingchao Xia et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Nanofiber-Based Proton Exchange Membranes: Development of Aligned Electrospun Nanofibers for Polymer Electrolyte Fuel Cell Applications

(2018) Parashuram Kallem et al.   ACS Sustainable Chemistry & Engineering

Eliminating micro-porous layer from gas diffusion electrode for use in high temperature polymer electrolyte membrane fuel cell

(2017) Huaneng Su et al.   JOURNAL OF POWER SOURCES

Tuning the performance of nitrogen, phosphorus co-doped nanoporous carbon for oxygen reduction reaction

(2017) Jinmei Li et al.   Journal of the Taiwan Institute of Chemical Engineers

The applications and prospect of fuel cells in medical field: A review

(2017) Qian Xu et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Effects of composition and nanostructuring of palladium selenide phases, Pd4Se, Pd7Se4 and Pd17Se15, on ORR activity and their use in Mg–air batteries

(2017) Suresh Kukunuri et al.   Journal of Materials Chemistry A

Enhancement of high temperature PEMFC stability using catalysts based on Pt supported on SiC based materials

(2016) Justo Lobato et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

A comprehensive review of PBI-based high temperature PEM fuel cells

(2016) Samuel Simon Araya et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Design of an Advanced Membrane Electrode Assembly Employing a Double-Layered Cathode for a PEM Fuel Cell

(2015) GyeongHee Kim et al.   ACS Applied Materials & Interfaces

The effect of binder content on the performance of a high temperature polymer electrolyte membrane fuel cell produced with reactive spray deposition technology

(2015) Siwon Kim et al.   ELECTROCHIMICA ACTA

Enhanced performance and stability of high temperature proton exchange membrane fuel cell by incorporating zirconium hydrogen phosphate in catalyst layer

(2015) Olivia Barron et al.   JOURNAL OF POWER SOURCES

High performance platinum nanorod assemblies based double-layered cathode for passive direct methanol fuel cells

(2015) Longjuan Pu et al.   JOURNAL OF POWER SOURCES

Development of membrane electrode assembly for high temperature proton exchange membrane fuel cell by catalyst coating membrane method

(2015) Huagen Liang et al.   JOURNAL OF POWER SOURCES

Lowering the platinum loading of high temperature polymer electrolyte membrane fuel cells with acid doped polybenzimidazole membranes

(2015) S. Martin et al.   JOURNAL OF POWER SOURCES

Poly(vinylimidazole) radiografted PVDF nanospheres as alternative binder for high temperature PEMFC electrodes

(2015) Samuele Galbiati et al.   JOURNAL OF POWER SOURCES

Preparation of Pt/C electrode with double catalyst layers by electrophoresis deposition method for PEMFC

(2014) Ganpurev Adilbish et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Effect of Platinum Distribution in Dual Catalyst Layer Structured Gas Diffusion Electrode on the Performance of High Temperature PEMFC

(2014) Huaneng Su et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Effect of membrane electrode assembly fabrication method on the single cell performances of polybenzimidazole-based high temperature polymer electrolyte membrane fuel cells

(2014) JuYeon Lee et al.   MACROMOLECULAR RESEARCH

Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer

(2013) Huaneng Su et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review

(2013) Amrit Chandan et al.   JOURNAL OF POWER SOURCES

A novel dual catalyst layer structured gas diffusion electrode for enhanced performance of high temperature proton exchange membrane fuel cell

(2013) Huaneng Su et al.   JOURNAL OF POWER SOURCES

Gas diffusion electrodes for high temperature PEM-type fuel cells: role of a polymer binder and method of the catalyst layer deposition

(2011) P. Mazúr et al.   JOURNAL OF APPLIED ELECTROCHEMISTRY

Role of Binders in High Temperature PEMFC Electrode

(2011) J. O. Park et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Effect of PTFE content in gas diffusion layer based on Nafion®/PTFE membrane for low humidity proton exchange membrane fuel cell

(2011) Jie-Cheng Tsai et al.   Journal of the Taiwan Institute of Chemical Engineers

Phosphoric acid-doped electrodes for a PBI polymer membrane fuel cell

(2010) M. Mamlouk et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC

(2010) Justo Lobato et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

High performance membrane electrode assembly with ultra-low platinum loading prepared by a novel multi catalyst layer technique

(2010) Hua-Neng Su et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

The effect of electrode parameters on performance of a phosphoric acid-doped PBI membrane fuel cell

(2009) M. Mamlouk et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Significant improvement in cathode performance for proton exchange membrane fuel cell by a novel double catalyst layer design

(2009) Hua-Neng Su et al.   JOURNAL OF POWER SOURCES

New sulfonated polybenzimidazole (SPBI) copolymer-based proton-exchange membranes for fuel cells

(2009) He Bai et al.   Journal of the Taiwan Institute of Chemical Engineers