Computational method for bearing surface wear prediction in total hip replacements

Effect of inward-outward rotation on hip wear simulation

(2020) Vesa Saikko   JOURNAL OF BIOMECHANICS

Experimental Analysis and Wear Prediction Model for Unfilled Polymer–Polymer Sliding Contacts

(2019) Vikram Ramesh et al.   TRIBOLOGY TRANSACTIONS

How long does a hip replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 15 years of follow-up

(2019) Jonathan T Evans et al.   LANCET

Lubrication modeling and wear calculation in artificial hip joint during the gait

(2019) Alessandro Ruggiero et al.   TRIBOLOGY INTERNATIONAL

Can a “pre-worn” bearing surface geometry reduce the wear of metal-on-metal hip replacements? – A numerical wear simulation study

(2018) Leiming Gao et al.   WEAR

Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking

(2018) Alessandro Ruggiero et al.   Materials

Wear Behaviours and Oxidation Effects on Different UHMWPE Acetabular Cups Using a Hip Joint Simulator

(2018) Saverio Affatato et al.   Materials

Development of a Novel in Silico Model to Investigate the Influence of Radial Clearance on the Acetabular Cup Contact Pressure in Hip Implants

(2018) Saverio Affatato et al.   Materials

Trends in Total Hip Arthroplasty in Young Patients - Results from a Regional Register

(2017) Amit Kumar et al.   Hip International

Wear Rates of Larger-Diameter Cross-Linked Polyethylene at 5 to 13 Years: Does Liner Thickness or Component Position Matter?

(2017) Jonathan G. Haw et al.   JOURNAL OF ARTHROPLASTY

Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation

(2017) Ariyan Ashkanfar et al.   JOURNAL OF BIOMECHANICS

A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis

(2017) Ariyan Ashkanfar et al.   Journal of the Mechanical Behavior of Biomedical Materials

Ten-year follow-up study of three alternative bearing surfaces used in total hip arthroplasty in young patients

(2017) A. Atrey et al.   Bone & Joint Journal

Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings

(2016) Murat Ali et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

The effect of different assembly loads on taper junction fretting wear in total hip replacements

(2016) Russell English et al.   TRIBOLOGY INTERNATIONAL

A computational approach to fretting wear prediction at the head–stem taper junction of total hip replacements

(2015) Russell English et al.   WEAR

Materials Sliding Wear Model Based on Energy Dissipation

(2014) Jamil Abdo   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

Importance of Comprehensive Hip Strengthening

(2011) William R Holcomb et al.   STRENGTH AND CONDITIONING JOURNAL

Wear versus Thickness and Other Features of 5-Mrad Crosslinked UHMWPE Acetabular Liners

(2010) Fu-Wen Shen et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Total Hip Wear Assessment: A Comparison Between Computational and In Vitro Wear Assessment Techniques Using ISO 14242 Loading and Kinematics

(2009) George Matsoukas et al.   JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME