Olivine LiFePO4 as an additive into LiCoO2 electrodes for LIBs to improve high-voltage performances

Cathode electrolyte interface of lithium difluorobis(oxalato) phosphate at 4.4 V operation of LiCoO2 for high-energy lithium-ion batteries

(2019) Seonghun Jeong et al.   ELECTROCHIMICA ACTA

Tuning Primary Particle Growth of Li1.2Ni0.2Mn0.6O2 by Nd-Modification for Improving the Electrochemical Performance of Lithium Ion Batteries

(2019) Xiangnan Li et al.   ACS Sustainable Chemistry & Engineering

Trimethyl Borate as Film-Forming Electrolyte Additive To Improve High-Voltage Performances

(2019) Qiuyan Liu et al.   ACS Applied Materials & Interfaces

In situ electrochemical surface modification for high-voltage LiCoO2 in lithium ion batteries

(2019) Jungwoo Lim et al.   JOURNAL OF POWER SOURCES

Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V

(2019) Jie-Nan Zhang et al.   Nature Energy

Enhanced cycling stability of high voltage LiCoO2 by surface phosphorylation

(2019) Run Gu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Alkali Metal Salt Catalyzed Carbothermic Reduction for Sustainable Recovery of LiCoO2: Accurately Controlled Reduction and Efficient Water Leaching

(2019) Wenqiang Wang et al.   ACS Sustainable Chemistry & Engineering

Reversible phase transition enabled by binary Ba and Ti-based surface modification for high voltage LiCoO2 cathode

(2019) Bei Hu et al.   JOURNAL OF POWER SOURCES

Hydrothermal-assisted synthesis of surface aluminum-doped LiCoO 2 nanobricks for high-rate lithium-ion batteries

(2018) Shuai Hu et al.   CERAMICS INTERNATIONAL

In situ coating on LiFePO4 with ionic liquid as carbon source for high-performance lithium batteries

(2018) Jun Xia et al.   JOURNAL OF NANOPARTICLE RESEARCH

Li 1.2 Mn 0.55 Ni 0.15 Co 0.1 O 2 (LMR-NMC)-Carbon Coated-LiMnPO 4 Blended Electrodes for High Performance Lithium Ion Batteries

(2018) S. Krishna Kumar et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping

(2018) Qi Liu et al.   Nature Energy

Influence of Zr dopant on microstructural and electrochemical properties of LiCoO2 thin film cathodes by RF sputtering

(2018) K. Sivajee Ganesh et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

PAni-coated LiFePO4 Synthesized by a Low Temperature Solvothermal Method

(2018) Wélique Silva Fagundes et al.   Materials Research-Ibero-american Journal of Materials

Investigation of intrinsic electrical properties of cerium doped lithium cobalt oxide, nanostructured materials

(2018) Misbah Mumtaz et al.   AIP Advances

Enhanced 4.5 V/55 °C cycling performance of LiCoO2 cathode via LiAlO2LiCo1-xAlxO2 double-layer coatings

(2018) Li Shao et al.   ELECTROCHIMICA ACTA

Blended cathode materials for all-solid-state Li-ion batteries

(2018) Jeong-Seon Lee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Al2O3 surface coating on LiCoO2 through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages

(2017) Aijun Zhou et al.   Journal of Materials Chemistry A

In situ Visualization of State-of-Charge Heterogeneity within a LiCoO2 Particle that Evolves upon Cycling at Different Rates

(2017) Yahong Xu et al.   ACS Energy Letters

The effect of elevated temperature on the accelerated aging of LiCoO 2 /mesocarbon microbeads batteries

(2016) Ting Guan et al.   APPLIED ENERGY

LiCoO 2 Degradation Behavior in the High-Voltage Phase Transition Region and Improved Reversibility with Surface Coating

(2016) Akira Yano et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Nitrogen-doped graphene guided formation of monodisperse microspheres of LiFePO4 nanoplates as the positive electrode material of lithium-ion batteries

(2016) Yingke Zhou et al.   Journal of Materials Chemistry A

Improving the cycling stability of LiCoO2 at 4.5V through co-modification by Mg doping and zirconium oxyfluoride coating

(2015) Zhiguo Wang et al.   CERAMICS INTERNATIONAL

Mg doping and zirconium oxyfluoride coating co-modification to enhance the high-voltage performance of LiCoO2 for lithium ion battery

(2015) Zhiguo Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Electrolytes and Interphases in Li-Ion Batteries and Beyond

(2014) Kang Xu   CHEMICAL REVIEWS

Improving the cycling stability of LiCoO2 at 4.5V through surface modification by Fe2O3 coating

(2013) Qin Hao et al.   ELECTROCHIMICA ACTA

Solid state synthesis of Fe2P nanoparticles as high-performance anode materials for nickel-based rechargeable batteries

(2013) Yaping Wang et al.   JOURNAL OF POWER SOURCES

A review of blended cathode materials for use in Li-ion batteries

(2013) Satishkumar B. Chikkannanavar et al.   JOURNAL OF POWER SOURCES

Effective enhancement of electrochemical properties for LiFePO4/C cathode materials by Na and Ti co-doping

(2012) Hongbo Shu et al.   ELECTROCHIMICA ACTA

A carbon-free LiFePO4 cathode material of high-rate capability prepared by a mechanical activation method

(2011) Yuehui Yin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

xLi2MnO3·(1−x)LiMO2 blended with LiFePO4 to achieve high energy density and pulse power capability

(2011) Kevin G. Gallagher et al.   JOURNAL OF POWER SOURCES

Probing the Origin of Enhanced Stability of “AlPO4” Nanoparticle Coated LiCoO2during Cycling to High Voltages: Combined XRD and XPS Studies

(2009) Yi-Chun Lu et al.   CHEMISTRY OF MATERIALS

Challenges for Rechargeable Li Batteries†

(2009) John B. Goodenough et al.   CHEMISTRY OF MATERIALS

Role of AlF[sub 3] Coating on LiCoO[sub 2] Particles during Cycling to Cutoff Voltage above 4.5 V

(2009) Yang-Kook Sun et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Building better batteries

(2008) M. Armand et al.   NATURE

Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test

(2007) Chil-Hoon Doh et al.   JOURNAL OF POWER SOURCES