Recent trends in natural polysaccharide based bioinks for multiscale 3D printing in tissue regeneration: A review

Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs

(2020) Cristina Antich et al.   Acta Biomaterialia

Printability of 3D Printed Hydrogel Scaffolds: Influence of Hydrogel Composition and Printing Parameters

(2020) Saman Naghieh et al.   Applied Sciences-Basel

Development of Bio-Active Patches Based on Pectin for the Treatment of Ulcers and Wounds Using 3D-Bioprinting Technology

(2020) Eleftherios G. Andriotis et al.   Pharmaceutics

Cell-laden alginate dialdehyde–gelatin hydrogels formed in 3D printed sacrificial gel

(2020) Dalia Dranseikiene et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Designing vascular supportive albumen-rich composite bioink for organ 3D printing

(2020) Suihong Liu et al.   Journal of the Mechanical Behavior of Biomedical Materials

Hybrid Sponge-Like Scaffolds Based on Ulvan and Gelatin: Design, Characterization and Evaluation of Their Potential Use in Bone Tissue Engineering

(2020) Leto-Aikaterini Tziveleka et al.   Materials

3D Bioprinting of osteochondral tissue substitutes – in vitro-chondrogenesis in multi-layered mineralized constructs

(2020) David Kilian et al.   Scientific Reports

Polysaccharide-Based Bioink Formulation for 3D Bioprinting of an In Vitro Model of the Human Dermis

(2020) Tanja Zidarič et al.   Nanomaterials

3D-bioprinted functional and biomimetic hydrogel scaffolds incorporated with nanosilicates to promote bone healing in rat calvarial defect model

(2020) Bin Liu et al.   Materials Science & Engineering C-Materials for Biological Applications

Polycaprolactone/polysaccharide functional composites for low-temperature fused deposition modelling

(2020) Yu-Qing Zhao et al.   Bioactive Materials

Printability and Shape Fidelity of Bioinks in 3D Bioprinting

(2020) Andrea Schwab et al.   CHEMICAL REVIEWS

Volume-by-volume bioprinting of chondrocytes-alginate bioinks in high temperature thermoplastic scaffolds for cartilage regeneration

(2019) JM Baena et al.   EXPERIMENTAL BIOLOGY AND MEDICINE

Investigating the effect of sterilisation methods on the physical properties and cytocompatibility of methyl cellulose used in combination with alginate for 3D-bioplotting of chondrocytes

(2019) Ella Hodder et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Fiber Reinforced Cartilage ECM Functionalized Bioinks for Functional Cartilage Tissue Engineering

(2019) Swetha Rathan et al.   Advanced Healthcare Materials

Wood-based nanocellulose and bioactive glass modified gelatin-alginate bioinks for 3D bioprinting of bone cells

(2019) Miina Ojansivu et al.   Biofabrication

Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting

(2019) Zita Maria Jessop et al.   Biofabrication

Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing

(2019) Wenyang Xu et al.   ACS Applied Materials & Interfaces

On Low-Concentration Inks Formulated by Nanocellulose Assisted with Gelatin Methacrylate (GelMA) for 3D Printing toward Wound Healing Application

(2019) Wenyang Xu et al.   ACS Applied Materials & Interfaces

Engineering nanocellulose hydrogels for biomedical applications

(2019) Rodrigo Curvello et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications

(2019) Haishun Du et al.   CARBOHYDRATE POLYMERS

Development of Injectable Fucoidan and Biological Macromolecules Hybrid Hydrogels for Intra-Articular Delivery of Platelet-Rich Plasma

(2019) Lu et al.   Marine Drugs

3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review

(2019) Sandya S. Athukoralalage et al.   Polymers

Ulvan: A systematic review of extraction, composition and function

(2019) Joel T. Kidgell et al.   Algal Research-Biomass Biofuels and Bioproducts

Acetylated Nanocellulose for Single-Component Bioinks and Cell Proliferation on 3D-Printed Scaffolds

(2019) Rubina Ajdary et al.   BIOMACROMOLECULES

The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine

(2019) G. Cidonio et al.   BIOMATERIALS

The Use of Platelet-Rich Plasma to Promote Cell Recruitment into Low-Molecular-Weight Fucoidan-Functionalized Poly(Ester-Urea-Urethane) Scaffolds for Soft-Tissue Engineering

(2019) Géraldine Rohman et al.   Polymers

Ultra-Low-Cost 3D Bioprinting: Modification and Application of an Off-the-Shelf Desktop 3D-Printer for Biofabrication

(2019) Melanie Kahl et al.   Frontiers in Bioengineering and Biotechnology

Bioinspired 3D printable pectin-nanocellulose ink formulations

(2019) Alexandra I. Cernencu et al.   CARBOHYDRATE POLYMERS

Ulvan, a bioactive marine sulphated polysaccharide as a key constituent of hybrid biomaterials: A review

(2019) Leto-Aikaterini Tziveleka et al.   CARBOHYDRATE POLYMERS

Properties of an alginate-gelatin-based bioink and its potential impact on cell migration, proliferation, and differentiation

(2019) Liuhanghang Cheng et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Bioink Composition and Printing Parameters for 3D Modeling Neural Tissue

(2019) Valentina Fantini et al.   Cells

Bioink formulations to ameliorate bioprinting-induced loss of cellular viability

(2019) Sudipto Datta et al.   Biointerphases

Extrusion-based 3D printing of photo-crosslinkable gelatin and κ-carrageenan hydrogel blends for adipose tissue regeneration

(2019) Liesbeth Tytgat et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting

(2019) Myoung Hwan Kim et al.   Journal of the Mechanical Behavior of Biomedical Materials

Marine Polysaccharides in Pharmaceutical Applications: Fucoidan and Chitosan as Key Players in the Drug Delivery Match Field

(2019) Ana Isabel Barbosa et al.   Marine Drugs

A 3D printed chitosan-pectin hydrogel wound dressing for lidocaine hydrochloride delivery

(2019) Jingjunjiao Long et al.   Materials Science & Engineering C-Materials for Biological Applications

Three-Dimensional Bioprinting of Functional Skeletal Muscle Tissue Using GelatinMethacryloyl-Alginate Bioinks

(2019) Seyedmahmoud et al.   Micromachines

Methods of extraction, physicochemical properties of alginates and their applications in biomedical field – a review

(2019) Magdalena Beata Łabowska et al.   Open Chemistry

Opportunities and challenges of translational 3D bioprinting

(2019) Sean V. Murphy et al.   Nature Biomedical Engineering

Status of Plant Protein-Based Green Scaffolds for Regenerative Medicine Applications

(2019) Jahangirian et al.   Biomolecules

Pectin-GPTMS-Based Biomaterial: toward a Sustainable Bioprinting of 3D scaffolds for Tissue Engineering Application

(2019) Anna Lapomarda et al.   BIOMACROMOLECULES

Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs

(2019) Liying Li et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Enhancement of mechanical strength of TCP-alginate based bioprinted constructs

(2019) Jie-Liang Song et al.   Journal of the Mechanical Behavior of Biomedical Materials

Assessing Mechanical and Rheological Properties of Potato Puree: Effect of Different Ingredient Combinations and Cooking Methods on the Feasibility of 3D Printing

(2019) Iman Dankar et al.   Foods

Cell-instructive pectin hydrogels crosslinked via thiol-norbornene photo-click chemistry for skin tissue engineering

(2018) Rúben F. Pereira et al.   Acta Biomaterialia

Potential and Limitations of Nanocelluloses as Components in Biocomposite Inks for Three-Dimensional Bioprinting and for Biomedical Devices

(2018) Gary Chinga-Carrasco   BIOMACROMOLECULES

Agarose-based biomaterials for tissue engineering

(2018) Payam Zarrintaj et al.   CARBOHYDRATE POLYMERS

Ulvan-chitosan polyelectrolyte complexes as matrices for enzyme induced biomimetic mineralization

(2018) Mamoni Dash et al.   CARBOHYDRATE POLYMERS

Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing

(2018) Ramanathan Yegappan et al.   CARBOHYDRATE POLYMERS

A strategy for strong interface bonding by 3D bioprinting of oppositely charged κ-carrageenan and gelatin hydrogels

(2018) Huijun Li et al.   CARBOHYDRATE POLYMERS

Tailor-made conductive inks from cellulose nanofibrils for 3D printing of neural guidelines

(2018) Volodymyr Kuzmenko et al.   CARBOHYDRATE POLYMERS

Three dimensional cell printing with sulfated alginate for improved bone morphogenetic protein-2 delivery and osteogenesis in bone tissue engineering

(2018) Jisun Park et al.   CARBOHYDRATE POLYMERS

Bioprinting and its applications in tissue engineering and regenerative medicine

(2018) Waeljumah Aljohani et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

3D printing process of oxidized nanocellulose and gelatin scaffold

(2018) Xiaodong Xu et al.   JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION

A 3D bioprinted in situ conjugated-co -fabricated scaffold for potential bone tissue engineering applications

(2018) Mduduzi N. Sithole et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering

(2018) Xingchen Yang et al.   Materials Science & Engineering C-Materials for Biological Applications

Bioprinting of mineralized constructs utilizing multichannel plotting of a self-setting calcium phosphate cement and a cell-laden bioink

(2018) Tilman Ahlfeld et al.   Biofabrication

Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior

(2018) Zhao Li et al.   Scientific Reports

Bioinks for 3D bioprinting: an overview

(2018) P. Selcan Gungor-Ozkerim et al.   Biomaterials Science

Interpenetrating network gelatin methacryloyl (GelMA) and pectin-g-PCL hydrogels with tunable properties for tissue engineering

(2018) Mohammad M. Fares et al.   Biomaterials Science

Exploitation of Cationic Silica Nanoparticles for Bioprinting of Large-Scale Constructs with High Printing Fidelity

(2018) Mihyun Lee et al.   ACS Applied Materials & Interfaces

Generation of a 3D Liver Model Comprising Human Extracellular Matrix in an Alginate/Gelatin-Based Bioink by Extrusion Bioprinting for Infection and Transduction Studies

(2018) Thomas Hiller et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Evaluation of a polyvinyl alcohol-alginate based hydrogel for precise 3D bioprinting

(2018) Fei Yu et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects

(2018) Željka Kačarević et al.   Materials

Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering

(2017) Fu You et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

3D bioprinting and its in vivo applications

(2017) Nhayoung Hong et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

In situ handheld three-dimensional bioprinting for cartilage regeneration

(2017) Claudia Di Bella et al.   Journal of Tissue Engineering and Regenerative Medicine

Cell-laden 3D bioprinting hydrogel matrix depending on different compositions for soft tissue engineering: Characterization and evaluation

(2017) Jisun Park et al.   Materials Science & Engineering C-Materials for Biological Applications

Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis

(2017) Srimanta Barui et al.   Materials Science & Engineering C-Materials for Biological Applications

Recent progress in cellulose nanocrystals: sources and production

(2017) Djalal Trache et al.   Nanoscale

Three-Dimensional Bioprinting of Polycaprolactone Reinforced Gene Activated Bioinks for Bone Tissue Engineering

(2017) Gráinne M. Cunniffe et al.   TISSUE ENGINEERING PART A

Three-Dimensional Printing and Angiogenesis: Tailored Agarose-Type I Collagen Blends Comprise Three-Dimensional Printability and Angiogenesis Potential for Tissue-Engineered Substitutes

(2017) Franziska Kreimendahl et al.   TISSUE ENGINEERING PART C-METHODS

Tuning Alginate Bioink Stiffness and Composition for Controlled Growth Factor Delivery and to Spatially Direct MSC Fate within Bioprinted Tissues

(2017) Fiona E. Freeman et al.   Scientific Reports

Mechanically Tunable Bioink for 3D Bioprinting of Human Cells

(2017) Aurelien Forget et al.   Advanced Healthcare Materials

Novel bioprinting method using a pectin based bioink

(2017) Amanda Banks et al.   TECHNOLOGY AND HEALTH CARE

Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink

(2017) Duong Nguyen et al.   Scientific Reports

Fabrication of hASCs-laden structures using extrusion-based cell printing supplemented with an electric field

(2016) MyungGu Yeo et al.   Acta Biomaterialia

Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications

(2016) Michael Müller et al.   ANNALS OF BIOMEDICAL ENGINEERING

3D Bioprinting for Vascularized Tissue Fabrication

(2016) Dylan Richards et al.   ANNALS OF BIOMEDICAL ENGINEERING

Advanced Bioinks for 3D Printing: A Materials Science Perspective

(2016) David Chimene et al.   ANNALS OF BIOMEDICAL ENGINEERING

Bacterial nanocellulose production and application: a 10-year overview

(2016) Angela Faustino Jozala et al.   APPLIED MICROBIOLOGY AND BIOTECHNOLOGY

Direct 3D bioprinting of perfusable vascular constructs using a blend bioink

(2016) Weitao Jia et al.   BIOMATERIALS

Current advances and future perspectives in extrusion-based bioprinting

(2016) Ibrahim T. Ozbolat et al.   BIOMATERIALS

3D bioprinting for engineering complex tissues

(2016) Christian Mandrycky et al.   BIOTECHNOLOGY ADVANCES

Preparation and characterization of chitosan-natural nano hydroxyapatite-fucoidan nanocomposites for bone tissue engineering

(2016) Baboucarr Lowe et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Poly(ethylene glycol) enclatherated pectin-mucin submicron matrices for intravaginal anti-HIV-1 drug delivery

(2016) Felix Mashingaidze et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Bio-printing cell-laden Matrigel–agarose constructs

(2016) Rong Fan et al.   JOURNAL OF BIOMATERIALS APPLICATIONS

Development of a 3D cell printed structure as an alternative to autologs cartilage for auricular reconstruction

(2016) Ju Young Park et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Mechanically reinforced cell-laden scaffolds formed using alginate-based bioink printed onto the surface of a PCL/alginate mesh structure for regeneration of hard tissue

(2016) Yong Bok Kim et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Identification of a Pro-Angiogenic Potential and Cellular Uptake Mechanism of a LMW Highly Sulfated Fraction of Fucoidan from Ascophyllum nodosum

(2016) Nicolas Marinval et al.   Marine Drugs

Sulfated Seaweed Polysaccharides as Multifunctional Materials in Drug Delivery Applications

(2016) Ludmylla Cunha et al.   Marine Drugs

Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting

(2016) Amit Panwar et al.   MOLECULES

Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder

(2016) Chien-Hsun Wang et al.   Materials

Incorporation of Fucoidan in β-Tricalcium phosphate-Chitosan scaffold prompts the differentiation of human bone marrow stromal cells into osteogenic lineage

(2016) Subramaniam Puvaneswary et al.   Scientific Reports

3D Bioprinting Using a Templated Porous Bioink

(2016) James P. K. Armstrong et al.   Advanced Healthcare Materials

Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells

(2016) Qi Gu et al.   Advanced Healthcare Materials

Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering

(2016) Daniela Filipa Duarte Campos et al.   Advanced Healthcare Materials

3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering

(2016) Andrew C. Daly et al.   Advanced Healthcare Materials

A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration

(2016) Naren Raja et al.   Journal of Materials Chemistry B

Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation

(2016) Zhengjie Wu et al.   Scientific Reports

Research on the printability of hydrogels in 3D bioprinting

(2016) Yong He et al.   Scientific Reports

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

(2015) Cristina Colosi et al.   ADVANCED MATERIALS

3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures

(2015) Sungmin Hong et al.   ADVANCED MATERIALS

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

(2015) Kajsa Markstedt et al.   BIOMACROMOLECULES

Effect of ultrasonic treatment on the degradation and inhibition cancer cell lines of polysaccharides from Porphyra yezoensis

(2015) Xiaojie Yu et al.   CARBOHYDRATE POLYMERS

Vegetal fiber-based biocomposites: Which stakes for food packaging applications?

(2015) Marie-Alix Berthet et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Three-dimensional plotting of a cell-laden alginate/methylcellulose blend: towards biofabrication of tissue engineering constructs with clinically relevant dimensions

(2015) Kathleen Schütz et al.   Journal of Tissue Engineering and Regenerative Medicine

The Stiffness and Structure of Three-Dimensional Printed Hydrogels Direct the Differentiation of Mesenchymal Stromal Cells Toward Adipogenic and Osteogenic Lineages

(2015) Daniela F. Duarte Campos et al.   TISSUE ENGINEERING PART A

Biofunctionalization of Ulvan Scaffolds for Bone Tissue Engineering

(2014) Mamoni Dash et al.   ACS Applied Materials & Interfaces

Engineering alginate as bioink for bioprinting

(2014) Jia Jia et al.   Acta Biomaterialia

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

(2014) Bethany C. Gross et al.   ANALYTICAL CHEMISTRY

Seaweed polysaccharide-based hydrogels used for the regeneration of articular cartilage

(2014) Elena Geta Popa et al.   CRITICAL REVIEWS IN BIOTECHNOLOGY

Nanocellulose in biomedicine: Current status and future prospect

(2014) Ning Lin et al.   EUROPEAN POLYMER JOURNAL

Bioprinting Technology: A Current State-of-the-Art Review

(2014) Amer B. Dababneh et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Chitosan-Alginate Biocomposite Containing Fucoidan for Bone Tissue Engineering

(2014) Jayachandran Venkatesan et al.   Marine Drugs

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Apple Derived Cellulose Scaffolds for 3D Mammalian Cell Culture

(2014) Daniel J. Modulevsky et al.   PLoS One

Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels

(2014) Luiz E Bertassoni et al.   Biofabrication

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

(2013) Joydip Kundu et al.   Journal of Tissue Engineering and Regenerative Medicine

Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs

(2013) Wouter Schuurman et al.   MACROMOLECULAR BIOSCIENCE

Anticancer and Cancer Preventive Properties of Marine Polysaccharides: Some Results and Prospects

(2013) Sergey Fedorov et al.   Marine Drugs

Bone tissue engineering using 3D printing

(2013) Susmita Bose et al.   Materials Today

Fucoidan Promotes Early Step of Cardiac Differentiation from Human Embryonic Stem Cells and Long-Term Maintenance of Beating Areas

(2013) Sofiane Hamidi et al.   TISSUE ENGINEERING PART A

3D Printing and Neurosurgery—Ready for Prime Time?

(2013) Geraldine T. Klein et al.   World Neurosurgery

In vitro antioxidant properties of crude extracts and compounds from brown algae

(2012) Elena M. Balboa et al.   FOOD CHEMISTRY

Processing ulvan into 2D structures: Cross-linked ulvan membranes as new biomaterials for drug delivery applications

(2012) Anabela Alves et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Femtosecond laser printing of living cells using absorbing film-assisted laser-induced forward transfer

(2012) Béla Hopp   OPTICAL ENGINEERING

Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid

(2012) Daniela F Duarte Campos et al.   Biofabrication

Cellulose nanomaterials review: structure, properties and nanocomposites

(2011) Robert J. Moon et al.   CHEMICAL SOCIETY REVIEWS

Chitosan/Fucoidan pH Sensitive Nanoparticles for Oral Delivery System

(2011) Yi-Cheng Huang et al.   JOURNAL OF THE CHINESE CHEMICAL SOCIETY

Biomaterials & scaffolds for tissue engineering

(2011) Fergal J. O'Brien   Materials Today

Rapid induction and long-term self-renewal of primitive neural precursors from human embryonic stem cells by small molecule inhibitors

(2011) W. Li et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Alginate: Properties and biomedical applications

(2011) Kuen Yong Lee et al.   PROGRESS IN POLYMER SCIENCE

Additive manufacturing of tissues and organs

(2011) Ferry P.W. Melchels et al.   PROGRESS IN POLYMER SCIENCE

Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting

(2010) Sylvain Catros et al.   APPLIED SURFACE SCIENCE

Ulvan as a New Type of Biomaterial from Renewable Resources: Functionalization and Hydrogel Preparation

(2010) Andrea Morelli et al.   MACROMOLECULAR CHEMISTRY AND PHYSICS

The molecular structures of starch components and their contribution to the architecture of starch granules: A comprehensive review

(2010) Serge Pérez et al.   STARCH-STARKE

Ultrastructure of ulvan: A polysaccharide from green seaweeds

(2009) Audrey Robic et al.   BIOPOLYMERS

A review of rapid prototyping techniques for tissue engineering purposes

(2008) Sanna M. Peltola et al.   ANNALS OF MEDICINE

A novel biocompatible adhesive incorporating plant-derived monomers

(2008) Catherine M. Klapperich et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing

(2008) J. Suwanprateeb et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Hierarchical starch-based fibrous scaffold for bone tissue engineering applications

(2008) Albino Martins et al.   Journal of Tissue Engineering and Regenerative Medicine

Scaffold degradation elevates the collagen content and dynamic compressive modulus in engineered articular cartilage

(2008) K.W. Ng et al.   OSTEOARTHRITIS AND CARTILAGE

Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing

(2008) Natalja E. Fedorovich et al.   TISSUE ENGINEERING PART A

Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures

(2008) Karoly Jakab et al.   TISSUE ENGINEERING PART A