A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model

Re-epithelialization and immune cell behaviour in an ex vivo human skin model

(2020) Ana Rakita et al.   Scientific Reports

Comparison of Energy Consumption between Hybrid Deposition & Micro-Rolling and Conventional Approach for Wrought Parts

(2020) Zhang Haiou et al.   JOURNAL OF CLEANER PRODUCTION

Process planning based on cylindrical or conical surfaces for five-axis wire and arc additive manufacturing

(2020) Fusheng Dai et al.   RAPID PROTOTYPING JOURNAL

Investigation, modeling and optimization of abnormal areas of weld beads in wire and arc additive manufacturing

(2020) Shangyong Tang et al.   RAPID PROTOTYPING JOURNAL

In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing

(2019) Sarah J. Wolff et al.   Scientific Reports

Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)

(2019) Tiago A. Rodrigues et al.   Materials

In situ 3D monitoring and control of geometric signatures in wire and arc additive manufacturing

(2019) Shangyong Tang et al.   Surface Topography-Metrology and Properties

Effects of interface gap and shielding gas on the quality of alloy AA6061 fiber laser lap weldings

(2019) Luca Pellone et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Methods for Rapid Pore Classification in Metal Additive Manufacturing

(2019) Robert Snell et al.   JOM

An in situ online methodology for emissivity measurement between 100 °C and 500 °C utilizing infrared sensor

(2019) Xi Chen et al.   INFRARED PHYSICS & TECHNOLOGY

Challenges associated with the wire arc additive manufacturing (WAAM) of aluminum alloys

(2019) Shivraman Thapliyal   Materials Research Express

Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing

(2018) Wentao Yan et al.   COMPUTATIONAL MECHANICS

Mitigation of hot cracking in Inconel 718 superalloy by ultrasonic vibration during gas tungsten arc welding

(2018) R. Thavamani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Environmental modelling of aluminium based components manufacturing routes: Additive manufacturing versus machining versus forming

(2018) Giuseppe Ingarao et al.   JOURNAL OF CLEANER PRODUCTION

Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing

(2018) Jun Xiong et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Relating porosity to fatigue failure in additively manufactured alloy 718

(2018) Luke Sheridan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

(2018) Chu Lun Alex Leung et al.   Nature Communications

Reducing Porosity and Refining Grains for Arc Additive Manufacturing Aluminum Alloy by Adjusting Arc Pulse Frequency and Current

(2018) Donghai Wang et al.   Materials

A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement

(2018) Bintao Wu et al.   Journal of Manufacturing Processes

Porosity Determination of Carbon and Glass Fibre Reinforced Polymers Using Phase-Contrast Imaging

(2018) Christian Gusenbauer et al.   JOURNAL OF NONDESTRUCTIVE EVALUATION

Revealing internal flow behaviour in arc welding and additive manufacturing of metals

(2018) Lee Aucott et al.   Nature Communications

Evaluation of 3D-Printed titanium alloy using eddy current testing with high-sensitivity magnetic sensor

(2018) Dongfeng He et al.   NDT & E INTERNATIONAL

Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V

(2017) Ross Cunningham et al.   JOM

Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel

(2017) Youheng Fu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Process planning for 8-axis robotized laser-based direct metal deposition system: A case on building revolved part

(2017) Yaoyu Ding et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

Ultrasonic phased array with surface acoustic wave for imaging cracks

(2017) Yoshikazu Ohara et al.   AIP Advances

Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process

(2016) Chen Shen et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Optimization of surface appearance for wire and arc additive manufacturing of Bainite steel

(2016) Fu Youheng et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

The metallurgy and processing science of metal additive manufacturing

(2016) W. J. Sames et al.   INTERNATIONAL MATERIALS REVIEWS

Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism

(2016) Yang Xie et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys

(2016) Jianglong Gu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V

(2016) J. Donoghue et al.   MATERIALS CHARACTERIZATION

Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V

(2016) Amanda J. Sterling et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Wire + Arc Additive Manufacturing

(2016) S. W. Williams et al.   MATERIALS SCIENCE AND TECHNOLOGY

Feature based building orientation optimization for additive manufacturing

(2016) Yicha Zhang et al.   RAPID PROTOTYPING JOURNAL

A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components

(2016) Blanka A. Szost et al.   MATERIALS & DESIGN

WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM

(2015) Deyong You et al.   IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS

Additive manufacturing and post-processing simulation: laser cladding followed by high speed machining

(2015) Konstantinos Salonitis et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

(2015) Donghong Ding et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg

(2015) Christian Weingarten et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Cluster analysis of acoustic emission signals in pitting corrosion of low carbon steel

(2015) H. Bi et al.   MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK

Traceability of Acoustic Emission measurements for a proposed calibration method – Classification of characteristics and identification using signal analysis

(2015) James Griffin   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Resistance based iterative learning control of additive manufacturing with wire

(2015) Petter Hagqvist et al.   MECHATRONICS

Review of pulsed thermal NDT: Physical principles, theory and data processing

(2015) Vladimir P. Vavilov et al.   NDT & E INTERNATIONAL

A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography

(2015) V.P. Vavilov et al.   POLYMER TESTING

Mitigation of distortion in large additive manufacturing parts

(2015) Erik R Denlinger et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy

(2014) Baoqiang Cong et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing

(2014) Gustavo Tapia et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations

(2014) Yong Huang et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Metal Additive Manufacturing: A Review

(2014) William E. Frazier   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition

(2014) Zhensheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Reducing hot cracking tendency of dissimilar weld overlay by magnetic arc oscillation

(2014) X. Yu et al.   MATERIALS SCIENCE AND TECHNOLOGY

A comparison of energy consumption in bulk forming, subtractive, and additive processes: Review and case study

(2014) Hae-Sung Yoon et al.   International Journal of Precision Engineering and Manufacturing-Green Technology

Analysis of characteristics of molten pool using cast shadow during high-power disk laser welding

(2013) Yanxi Zhang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Determination of Bulk Residual Stresses in Electron Beam Additive-Manufactured Aluminum

(2013) Craig A. Brice et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling

(2013) Haiou Zhang et al.   RAPID PROTOTYPING JOURNAL

Unsupervised acoustic emission data clustering for the analysis of damage mechanisms in glass/polyester composites

(2012) Amir Refahi Oskouei et al.   MATERIALS & DESIGN

Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration

(2012) Fanrong Kong et al.   OPTICS AND LASER TECHNOLOGY

Experimental evaluation of electromagnetic-thermal non-destructive inspection by eddy current thermography in square aluminum plates

(2011) N. Tsopelas et al.   NDT & E INTERNATIONAL

Magnetic non-destructive testing method for thin-plate aluminum alloys

(2011) Bo Hu et al.   NDT & E INTERNATIONAL

3-D finite element analysis of stress concentration factor in spot-welded joints of steel: The effect of process-induced porosity

(2010) Farida Bouafia et al.   COMPUTATIONAL MATERIALS SCIENCE

Hybrid plasma deposition and milling for an aeroengine double helix integral impeller made of superalloy

(2009) Xiong Xinhong et al.   ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting

(2008) Peter Heinl et al.   Acta Biomaterialia

Metal direct prototyping by using hybrid plasma deposition and milling

(2008) Xinhong Xiong et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al–Cu alloys

(2008) Alexandre P. Boeira et al.   MATERIALS & DESIGN

The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming

(2008) Xiaoming Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Rotating machinery prognostics: State of the art, challenges and opportunities

(2008) Aiwina Heng et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

X-ray based methods for non-destructive testing and material characterization

(2008) Randolf Hanke et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT