Fracture behavior of cylindrical sandstone specimens with two pre-existing flaws: experimental investigation and PFC3D simulation

Fatigue and damage properties of non-consecutive jointed mudstone samples subjected to cyclic triaxial loading

(2020) Qingsong Zheng et al.   Bulletin of Engineering Geology and the Environment

A study on mechanical properties and fracturing behavior of Carrara marble with the flat‐jointed model

(2020) Yi Cheng et al.   INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS

AE event rate characteristics of flawed granite: from damage stress to ultimate failure

(2020) Jian-Zhi Zhang et al.   GEOPHYSICAL JOURNAL INTERNATIONAL

Experimental Study of Mechanical and Permeability Behaviors During the Failure of Sandstone Containing Two Preexisting Fissures Under Triaxial Compression

(2020) Yiteng Du et al.   ROCK MECHANICS AND ROCK ENGINEERING

Experimental study of the influence of temperature and cooling method on mechanical properties of granite: Implication for geothermal mining

(2020) Chun Li et al.   Energy Science & Engineering

Experimental and Numerical Study on Mechanical and Cracking Behaviors of Flawed Granite under Triaxial Compression

(2019) Wei Yao et al.   MEASUREMENT

An experimental study of mechanical behavior of brittle rock-like specimens with multi-non-persistent joints under uniaxial compression and damage analysis

(2019) Wendong Yang et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

Numerical investigations on crack propagation and crack branching in brittle solids under dynamic loading using bond-particle model

(2019) M.M. Kou et al.   ENGINEERING FRACTURE MECHANICS

Progressive failure of brittle rocks with non‐isometric flaws: Insights from acousto‐optic‐mechanical (AOM) data

(2019) Jian‐Zhi Zhang et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Experimental and Numerical Study into 3D Crack Growth from a Spherical Pore in Biaxial Compression

(2019) Hongyu Wang et al.   ROCK MECHANICS AND ROCK ENGINEERING

3D numerical simulation of initiation, propagation and coalescence of cracks using the extended non-ordinary state-based peridynamics

(2019) Yundong Shou et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Effects of seepage-induced erosion on nonlinear hydraulic properties of broken red sandstones

(2019) Dan Ma et al.   TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

Effects of height/diameter ratio on failure and damage properties of granite under coupled bending and splitting deformation

(2019) Dan Ma et al.   ENGINEERING FRACTURE MECHANICS

FDEM Simulation of Rocks with Microstructure Generated by Voronoi Grain-Based Model with Particle Growth

(2019) Wei Zhou et al.   ROCK MECHANICS AND ROCK ENGINEERING

3-D X-ray computed tomography on failure characteristics of rock-like materials under coupled hydro-mechanical loading

(2019) Miaomiao Kou et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Determination of the stress field and crack initiation angle of an open flaw tip under uniaxial compression

(2019) Hang Lin et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Failure mechanical and acoustic behavior of brine saturated-sandstone containing two pre-existing flaws under different confining pressures

(2018) Sheng-Qi Yang et al.   ENGINEERING FRACTURE MECHANICS

Investigation on mechanical behavior and crack coalescence of sandstone specimens containing fissure-hole combined flaws under uniaxial compression

(2018) Qian Yin et al.   GEOSCIENCES JOURNAL

Mechanical and cracking behavior of granite containing two coplanar flaws under conventional triaxial compression

(2018) Yan-Hua Huang et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

The length of pre-existing fissures effects on the mechanical properties of cracked red sandstone and strength design in engineering

(2018) Jiangyu Wu et al.   ULTRASONICS

Numerical investigation of the shear behavior of granite materials containing discontinuous joints by utilizing the flat-joint model

(2018) Xu-Xu Yang et al.   COMPUTERS AND GEOTECHNICS

Acoustic emission characteristics of creep fracture evolution in double-fracture fine sandstone under uniaxial compression

(2018) Guangcheng Shi et al.   ENGINEERING FRACTURE MECHANICS

Particle size distribution of aggregate effects on mechanical and structural properties of cemented rockfill: Experiments and modeling

(2018) Jiangyu Wu et al.   CONSTRUCTION AND BUILDING MATERIALS

Three-dimensional numerical study on the failure characteristics of intermittent fissures under compressive-shear loads

(2018) Yun-Teng Wang et al.   Acta Geotechnica

Crack coalescence behavior of sandstone specimen containing two pre-existing flaws under different confining pressures

(2018) Yan-Hua Huang et al.   THEORETICAL AND APPLIED FRACTURE MECHANICS

Experimental Investigation on the Fatigue Mechanical Properties of Intermittently Jointed Rock Models Under Cyclic Uniaxial Compression with Different Loading Parameters

(2017) Yi Liu et al.   ROCK MECHANICS AND ROCK ENGINEERING

Identification of a Suitable 3D Printing Material for Mimicking Brittle and Hard Rocks and Its Brittleness Enhancements

(2017) T. Zhou et al.   ROCK MECHANICS AND ROCK ENGINEERING

Three-dimensional fracture propagation with numerical manifold method

(2016) Yongtao Yang et al.   ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS

3D Numerical Modeling of the Propagation of Hydraulic Fracture at Its Intersection with Natural (Pre-existing) Fracture

(2016) Ali Naghi Dehghan et al.   ROCK MECHANICS AND ROCK ENGINEERING

Three-Dimensional Element Partition Method for Fracture Simulation

(2016) Zhennan Zhang et al.   International Journal of Geomechanics

Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression

(2015) Xiao-Ping Zhang et al.   ENGINEERING GEOLOGY

Experimental and numerical investigations on the shear behavior of a jointed rock mass

(2015) Yong Li et al.   GEOSCIENCES JOURNAL

Numerical modeling of rock mechanical behavior and fracture propagation by a new bond contact model

(2015) Mingjing Jiang et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Numerical study of stress distribution and crack coalescence mechanisms of a solid containing multiple holes

(2015) Robina H.C. Wong et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Mechanical Behavior of Brittle Rock-Like Specimens with Pre-existing Fissures Under Uniaxial Loading: Experimental Studies and Particle Mechanics Approach

(2015) Ri-hong Cao et al.   ROCK MECHANICS AND ROCK ENGINEERING

The 3D Numerical Simulation for the Propagation Process of Multiple Pre-existing Flaws in Rock-Like Materials Subjected to Biaxial Compressive Loads

(2015) J. Bi et al.   ROCK MECHANICS AND ROCK ENGINEERING

Numerical Study on Crack Propagation in Brittle Jointed Rock Mass Influenced by Fracture Water Pressure

(2015) Yong Li et al.   Materials

Experimental investigation of acoustic emissions and their moment tensors in rock during failure

(2014) Eyvind Aker et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Step-path failure of rock slopes with intermittent joints

(2014) Da Huang et al.   Landslides

Strength failure and crack coalescence behavior of sandstone containing single pre-cut fissure under coupled stress, fluid flow and changing chemical environment

(2014) Zu-de Lu et al.   Journal of Central South University

Numerical study of failure behaviour of pre-cracked rock specimens under conventional triaxial compression

(2013) S.Y. Wang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

A three-dimensional numerical investigation of the fracture of rock specimens containing a pre-existing surface flaw

(2012) Z.Z. Liang et al.   COMPUTERS AND GEOTECHNICS

Evaluation of Methods for Determining Crack Initiation in Compression Tests on Low-Porosity Rocks

(2012) Mohsen Nicksiar et al.   ROCK MECHANICS AND ROCK ENGINEERING

Study of failure and scale effects in rocks under uniaxial compression using 3D cellular automata

(2009) Peng-Zhi Pan et al.   INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES

Experimental investigation on strength and failure behavior of pre-cracked marble under conventional triaxial compression

(2008) S.Q. Yang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation

(2008) L. N. Y. Wong et al.   ROCK MECHANICS AND ROCK ENGINEERING