Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C

Behaviour of pre-stressed T91 and ODS steels exposed to liquid lead-bismuth eutectic

(2018) Anna Hojna et al.   CORROSION SCIENCE

Microstructural evolution and mechanical properties of an Fe–18Ni–16Cr–4Al base alloy during aging at 950°C

(2016) Man Wang et al.   International Journal of Minerals Metallurgy and Materials

Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 °C

(2016) Marion Roy et al.   JOURNAL OF NUCLEAR MATERIALS

Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead–bismuth eutectic at 450 and 550 °C

(2016) Carsten Schroer et al.   JOURNAL OF NUCLEAR MATERIALS

Evaluation of Pb–17Li compatibility of ODS Fe-12Cr-5Al alloys

(2016) Kinga A. Unocic et al.   JOURNAL OF NUCLEAR MATERIALS

Oxide scale formation on 316L and FeCrAl steels exposed to oxygen controlled static LBE at temperatures up to 800 °C

(2016) C. Cionea et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Long term corrosion resistance of alumina forming austenitic stainless steels in liquid lead

(2015) Jesper Ejenstam et al.   JOURNAL OF NUCLEAR MATERIALS

Selective leaching of nickel and chromium from Type 316 austenitic steel in oxygen-containing lead–bismuth eutectic (LBE)

(2014) Carsten Schroer et al.   CORROSION SCIENCE

Corrosion behavior of austenitic steels 1.4970, 316L and 1.4571 in flowing LBE at 450 and 550 °C with 10 −7 mass% dissolved oxygen

(2014) Valentyn Tsisar et al.   JOURNAL OF NUCLEAR MATERIALS

Materials challenges in nuclear energy

(2013) S.J. Zinkle et al.   ACTA MATERIALIA

Corrosion behavior of Fe–14Cr–2W and Fe–9Cr–2W ODS steels in stagnant liquid Pb with different oxygen concentration at 550 and 650°C

(2013) Olga Yeliseyeva et al.   JOURNAL OF NUCLEAR MATERIALS

Oxide scales formed on Fe–Cr–Al-based model alloys exposed to oxygen containing molten lead

(2013) A. Weisenburger et al.   JOURNAL OF NUCLEAR MATERIALS

Oxidation studies of Fe10CrAl–RE alloys exposed to Pb at 550°C for 10,000h

(2013) Jesper Ejenstam et al.   JOURNAL OF NUCLEAR MATERIALS

Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance

(2013) M.P. Brady et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Assessment of liquid metal technology status and research paths for their use as efficient heat transfer fluids in solar central receiver systems

(2013) J. Pacio et al.   SOLAR ENERGY

Oxidation and dissolution of iron in flowing lead–bismuth eutectic at 450°C

(2012) Carsten Schroer et al.   CORROSION SCIENCE

Long term corrosion on T91 and AISI1 316L steel in flowing lead alloy and corrosion protection barrier development: Experiments and models

(2011) A. Weisenburger et al.   JOURNAL OF NUCLEAR MATERIALS

Long-term service of austenitic steel 1.4571 as a container material for flowing lead–bismuth eutectic

(2011) Carsten Schroer et al.   JOURNAL OF NUCLEAR MATERIALS

Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems

(2011) A. Kimura et al.   JOURNAL OF NUCLEAR MATERIALS

Influence of composition and microstructure on the corrosion behavior of different Fe–Cr–Al alloys in molten LBE

(2011) M. Del Giacco et al.   JOURNAL OF NUCLEAR MATERIALS

Aspects of minimizing steel corrosion in liquid lead-alloys by addition of oxygen

(2011) Carsten Schroer et al.   NUCLEAR ENGINEERING AND DESIGN

Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor

(2011) M. P. Brady et al.   OXIDATION OF METALS

Quantification of the Long-Term Performance of Steels T91 and 316L in Oxygen-Containing Flowing Lead-Bismuth Eutectic at 550°C

(2010) Carsten Schroer et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Evaluation of Mn substitution for Ni in alumina-forming austenitic stainless steels

(2009) Y. Yamamoto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Composition, Microstructure, and Water Vapor Effects on Internal/External Oxidation of Alumina-Forming Austenitic Stainless Steels

(2009) M. P. Brady et al.   OXIDATION OF METALS