Predicting the mechanical properties of sustainable concrete containing waste foundry sand using multi-objective ANN approach

An intelligent model for the prediction of the compressive strength of cementitious composites with ground granulated blast furnace slag based on ultrasonic pulse velocity measurements

(2021) Sławomir Czarnecki et al.   MEASUREMENT

Sizing optimization of exposed steel penstocks supported by ring girders using the combined ANN-GA technique

(2020) Manal Haddouch et al.   Structures

Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using hybridized multi-objective ANN and salp swarm algorithm

(2020) Amirreza Kandiri et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete

(2020) Andrés Juan-Valdés et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparison of artificial neural network (ANN) and response surface methodology (RSM) prediction in compressive strength of recycled concrete aggregates

(2019) Abdelkader Hammoudi et al.   CONSTRUCTION AND BUILDING MATERIALS

Potential use of rubber as aggregate in structural reinforced concrete element – A review

(2019) Kristina Strukar et al.   ENGINEERING STRUCTURES

Prediction of Mechanical Properties of Rubberised Concrete Exposed to Elevated Temperature Using ANN

(2019) Trilok Gupta et al.   MEASUREMENT

Strength performance of recycled aggregate concretes containing mineral admixtures and their performance prediction through various modeling techniques

(2019) Sumit Arora et al.   Journal of Building Engineering

Properties and utilizations of waste tire rubber in concrete: A review

(2019) Ayesha Siddika et al.   CONSTRUCTION AND BUILDING MATERIALS

Prediction of triaxial behavior of recycled aggregate concrete using multivariable regression and artificial neural network techniques

(2019) Jinjun Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Green high strength concrete containing recycled waste ceramic aggregates and waste carpet fibers: Mechanical, durability, and microstructural properties

(2019) Seyed Alireza Zareei et al.   Journal of Building Engineering

Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer

(2019) Emadaldin Mohammadi Golafshani et al.   CONSTRUCTION AND BUILDING MATERIALS

Condition assessment of RC beams using artificial neural networks

(2019) B. Murali Krishna et al.   Structures

Effects of deicers on the performance of concrete pavements containing air-cooled blast furnace slag and supplementary cementitious materials

(2018) Kho Pin Verian et al.   CEMENT & CONCRETE COMPOSITES

Recovery of cotton fibers from waste Blue-Jeans and its use in polyester concrete

(2018) Patricia Peña-Pichardo et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of plastic wastes in fiber-reinforced concrete beams

(2018) F.S. Khalid et al.   CONSTRUCTION AND BUILDING MATERIALS

A modified firefly algorithm-artificial neural network expert system for predicting compressive and tensile strength of high-performance concrete

(2018) Dac-Khuong Bui et al.   CONSTRUCTION AND BUILDING MATERIALS

Application of soft computing methods for predicting the elastic modulus of recycled aggregate concrete

(2018) Emadaldin Mohammadi Golafshani et al.   JOURNAL OF CLEANER PRODUCTION

Recycle option for metallurgical by-product (Spent Foundry Sand) in green concrete for sustainable construction

(2018) Rafat Siddique et al.   JOURNAL OF CLEANER PRODUCTION

Green concrete partially comprised of rice husk ash as a supplementary cementitious material – A comprehensive review

(2018) Blessen Skariah Thomas   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Engineering properties of concrete with partial utilization of used foundry sand

(2018) Thiruvenkitam Manoharan et al.   WASTE MANAGEMENT

Artificial neural network based modelling approach for strength prediction of concrete incorporating agricultural and construction wastes

(2018) Mulusew Aderaw Getahun et al.   CONSTRUCTION AND BUILDING MATERIALS

Predicting the compressive strength of silica fume concrete using hybrid artificial neural network with multi-objective grey wolves

(2018) Ali Behnood et al.   JOURNAL OF CLEANER PRODUCTION

Can waste foundry sand fully replace structural concrete sand?

(2018) Maria Mavroulidou et al.   Journal of Material Cycles and Waste Management

Study on waste foundry exhaust sand, WFES, as a partial substitute of fine aggregates in conventional concrete

(2018) Maria Auxiliadora de Barros Martins et al.   Sustainable Cities and Society

Hybrid ultrasonic-neural prediction of the compressive strength of environmentally friendly concrete screeds with high volume of waste quartz mineral dust

(2018) Łukasz Sadowski et al.   JOURNAL OF CLEANER PRODUCTION

Estimating the optimal mix design of silica fume concrete using biogeography-based programming

(2018) Emadaldin Mohammadi Golafshani et al.   CEMENT & CONCRETE COMPOSITES

A review on fly ash characteristics – Towards promoting high volume utilization in developing sustainable concrete

(2017) T. Hemalatha et al.   JOURNAL OF CLEANER PRODUCTION

Micro and mechanical behaviour of Treated Used Foundry Sand concrete

(2016) N. Gurumoorthy et al.   CONSTRUCTION AND BUILDING MATERIALS

A comparative study on the compressive strength prediction models for High Performance Concrete containing nano silica and copper slag using regression analysis and Artificial Neural Networks

(2016) S. Chithra et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review

(2016) Erdoğan Özbay et al.   CONSTRUCTION AND BUILDING MATERIALS

Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm

(2015) Ali Behnood et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of the splitting tensile strength in plain and steel fiber-reinforced concrete based on the compressive strength

(2015) Ali Behnood et al.   CONSTRUCTION AND BUILDING MATERIALS

Multi-Verse Optimizer: a nature-inspired algorithm for global optimization

(2015) Seyedali Mirjalili et al.   NEURAL COMPUTING & APPLICATIONS

Mechanical and Durability Properties of Concrete Made with Used Foundry Sand as Fine Aggregate

(2015) G. Ganesh Prabhu et al.   Advances in Materials Science and Engineering

Effects of foundry sand as a fine aggregate in concrete production

(2014) G. Ganesh Prabhu et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars

(2014) Zhen Hua Duan et al.   MATERIALS & DESIGN

Using artificial neural networks for predicting the elastic modulus of recycled aggregate concrete

(2013) Z.H. Duan et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of two different sources and washing treatment on the properties of UFS by-products for mortar and concrete production

(2013) Saveria Monosi et al.   CONSTRUCTION AND BUILDING MATERIALS

Capillarity of concrete incorporating waste foundry sand

(2013) J.M. Khatib et al.   CONSTRUCTION AND BUILDING MATERIALS

General models for estimating daily global solar radiation for different solar radiation zones in mainland China

(2013) Mao-Fen Li et al.   ENERGY CONVERSION AND MANAGEMENT

The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete

(2012) H. Merve Basar et al.   CONSTRUCTION AND BUILDING MATERIALS

Micro-structural and metal leachate analysis of concrete made with fungal treated waste foundry sand

(2012) Gurdeep Kaur et al.   CONSTRUCTION AND BUILDING MATERIALS

Prediction of compressive strength of recycled aggregate concrete using artificial neural networks

(2012) Z.H. Duan et al.   CONSTRUCTION AND BUILDING MATERIALS

Prediction of compressive strength of self-compacting concrete containing bottom ash using artificial neural networks

(2011) Rafat Siddique et al.   ADVANCES IN ENGINEERING SOFTWARE

Effect of metakaolin and foundry sand on the near surface characteristics of concrete

(2011) Rafat Siddique et al.   CONSTRUCTION AND BUILDING MATERIALS

Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS)

(2011) Gurpreet Singh et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete

(2011) Gurpreet Singh et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilization of silica fume in concrete: Review of hardened properties

(2011) Rafat Siddique   RESOURCES CONSERVATION AND RECYCLING

Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS)

(2010) Rafat Siddique et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of used-foundry sand on the mechanical properties of concrete

(2008) Rafat Siddique et al.   CONSTRUCTION AND BUILDING MATERIALS