A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite

Residual compressive response of concrete produced with both coarse and fine recycled concrete aggregates after thermal exposure

(2020) Hui Zhao et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of graphite nano/micro platelets on the residual performance of high strength concrete exposed to elevated temperature

(2020) Hafiz Waheed Iqbal et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties and microstructure of basalt fibre and nano-silica reinforced recycled concrete after exposure to elevated temperatures

(2020) Wang Yonggui et al.   CONSTRUCTION AND BUILDING MATERIALS

Residual properties of concrete exposed to elevated temperatures

(2019) Muhammad Masood Rafi et al.   PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS

Effects of elevated temperature on performance of recycled coarse aggregate concrete

(2019) Hammad Salahuddin et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled concrete aggregates

(2019) Yuyin Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of fly ash on the mechanical and impact properties of recycled aggregate concrete after exposure to high temperature

(2019) Qianqian Ren et al.   European Journal of Environmental and Civil Engineering

Influence of ground granulated blast furnace slag on early-age cracking potential of internally cured high performance concrete

(2019) Dejian Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

Predicting residual deformations in a reinforced concrete building structure after a fire event

(2019) Shuna Ni et al.   ENGINEERING STRUCTURES

Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete

(2018) F.B. Varona et al.   CONSTRUCTION AND BUILDING MATERIALS

Coupling effects of silica fume and steel-fiber on the compressive behaviour of recycled aggregate concrete after exposure to elevated temperature

(2018) Jianhe Xie et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature

(2018) Ngoc Kien Bui et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of fine ceramic aggregates on the residual properties of concrete subjected to elevated temperature

(2018) Deepak Rajawat et al.   FIRE AND MATERIALS

Mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures

(2018) Wasim Khaliq et al.   FIRE SAFETY JOURNAL

Residual mechanical properties of polypropylene fiber-reinforced concrete after heating

(2018) Javad Eidan et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermal and residual mechanical profile of recycled aggregate concrete prepared with carbonated concrete aggregates after exposure to elevated temperatures

(2017) Dongxing Xuan et al.   FIRE AND MATERIALS

Thermal behavior of polypropylene fiber-reinforced concrete at elevated temperatures

(2017) Ewa Rudnik et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures

(2016) Cléo Laneyrie et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of thermal insulation concrete with recycled coarse aggregates after elevated temperature exposure

(2016) Yuanzhen Liu et al.   Materials Testing

Effect of Elevated Temperature on Mechanical Properties of Limestone, Quartzite and Granite Concrete

(2016) Muhammad Tufail et al.   International Journal of Concrete Structures and Materials

Evaluation of the mechanical properties of 200MPa ultra-high-strength concrete at elevated temperatures and residual strength of column

(2015) Gyeongcheol Choe et al.   CONSTRUCTION AND BUILDING MATERIALS

Study on thermal properties of recycled aggregate concrete and recycled concrete blocks

(2015) Lihua Zhu et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of concrete at high temperature—A review

(2015) Qianmin Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers

(2015) Vahid Afroughsabet et al.   CONSTRUCTION AND BUILDING MATERIALS

Fire Performance of Sustainable Recycled Concrete Aggregates: Mechanical Properties at Elevated Temperatures and Current Research Needs

(2015) John Gales et al.   FIRE TECHNOLOGY

Thermal strain behavior and strength degradation of ultra-high-strength-concrete

(2015) Young Wook Lee et al.   MATERIALS AND STRUCTURES

Effects of Key Factors on Compressive and Tensile Strengths of Concrete Exposed to Elevated Temperatures

(2014) Shamsad Ahmad et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Residue strength, water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures

(2014) Shi Cong Kou et al.   CEMENT & CONCRETE COMPOSITES

Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures

(2014) G.M. Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review

(2014) Monalisa Behera et al.   CONSTRUCTION AND BUILDING MATERIALS

An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume

(2014) H. Dilbas et al.   CONSTRUCTION AND BUILDING MATERIALS

Performance of nano-Silica modified high strength concrete at elevated temperatures

(2014) Morteza Bastami et al.   CONSTRUCTION AND BUILDING MATERIALS

Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures

(2014) Yong-chang Guo et al.   JOURNAL OF CLEANER PRODUCTION

Effect of elevated temperature on the behavior of high volume fly ash concrete

(2014) M. S. Khan et al.   KSCE Journal of Civil Engineering

Influence of Fly Ash and GGBFS in Laterized Concrete Exposed to Elevated Temperatures

(2013) George Mathew et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Simplified approach for evaluating residual strength of fire-exposed reinforced concrete columns

(2013) V. K. R. Kodur et al.   MATERIALS AND STRUCTURES

Residual compressive and flexural strength of a recycled aggregate concrete following elevated temperatures

(2013) Jianzhuang Xiao et al.   Structural Concrete

Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature

(2012) Mohamed Heikal et al.   CONSTRUCTION AND BUILDING MATERIALS

Splitting strength of GGBFS concrete incorporating with steel fiber and polypropylene fiber after exposure to elevated temperatures

(2012) Danying Gao et al.   FIRE SAFETY JOURNAL

Residual Mechanical Response of Recycled Aggregate Concrete after Exposure to Elevated Temperatures

(2012) Salah R. Sarhat et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

An experimental study on the residual mechanical properties of fiber reinforced concrete with high temperature and load

(2012) Young-sun Kim et al.   MATERIALS AND STRUCTURES

Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates

(2011) J.P.B. Vieira et al.   CEMENT AND CONCRETE RESEARCH

The effect of high temperatures on the mechanical properties of concrete made with different types of aggregates

(2011) Ivanka Netinger et al.   FIRE SAFETY JOURNAL

Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800°C

(2011) Yuh-Shiou Tai et al.   NUCLEAR ENGINEERING AND DESIGN

Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature

(2010) P. Pliya et al.   CONSTRUCTION AND BUILDING MATERIALS

Retained properties of concrete exposed to high temperatures: Size effect

(2009) Omer Arioz   FIRE AND MATERIALS

Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures

(2009) Ali Behnood et al.   FIRE SAFETY JOURNAL

Residual Mechanical Properties of High-Strength Concretes after Exposure to Elevated Temperatures

(2009) Masoud Ghandehari et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Recycled concrete made with different natural coarse aggregates exposed to high temperature

(2008) Claudio Javier Zega et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures

(2007) Ali Behnood et al.   CEMENT & CONCRETE COMPOSITES

Effect of thermal shock due to rapid cooling on residual mechanical properties of fiber concrete exposed to high temperatures

(2007) Gai-Fei Peng et al.   CONSTRUCTION AND BUILDING MATERIALS