Enhanced mechanical and biodegradable properties of PBAT/lignin composites via silane grafting and reactive extrusion

A molecularly engineered bioderived polyphosphate for enhanced flame retardant, UV-blocking and mechanical properties of poly(lactic acid)

(2021) Yan Zhang et al.   CHEMICAL ENGINEERING JOURNAL

Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites

(2020) Xiaodong Xu et al.   COMPOSITES PART B-ENGINEERING

Properties of maleic anhydride‐modified lignin nanoparticles/polybutylene adipate‐co‐terephthalate composites

(2020) Xuping Yang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effect of Diisocyanates as Compatibilizer on the Properties of BF/PBAT Composites by In Situ Reactive Compatibilization, Crosslinking and Chain Extension

(2020) Xiwei Xie et al.   Materials

Grafting Lignin with Bioderived Polyacrylates for Low-Cost, Ductile, and Fully Biobased Poly(lactic acid) Composites

(2020) Yiqi Sun et al.   ACS Sustainable Chemistry & Engineering

Reactive extrusion of sustainable PHBV/PBAT-based nanocomposite films with organically modified nanoclay for packaging applications: Compression moulding vs. cast film extrusion

(2020) Akhilesh K. Pal et al.   COMPOSITES PART B-ENGINEERING

Economically Competitive Biodegradable PBAT/Lignin Composites: Effect of Lignin Methylation and Compatibilizer

(2020) Shao-Jun Xiong et al.   ACS Sustainable Chemistry & Engineering

Effects of high starch content on the physicochemical properties of starch/PBAT nanocomposite films prepared by extrusion blowing

(2020) Xiaosong Zhai et al.   CARBOHYDRATE POLYMERS

PBAT green composites: Effects of kraft lignin particles on the morphological, thermal, crystalline, macro and micromechanical properties

(2020) Hanieh Kargarzadeh et al.   POLYMER

Influence of plasticizers on thermal and mechanical properties of biocomposite filaments made from lignin and polylactic acid for 3D printing

(2020) Sanjita Wasti et al.   COMPOSITES PART B-ENGINEERING

Microplastics as pollutants in agricultural soils

(2020) Manish Kumar et al.   ENVIRONMENTAL POLLUTION

Enhanced thermal property and anti-moisture absorption of PA6/P (N-(4-carboxyphenyl)maleimide-alt-triallyl isocyanurate) composites based on solid-state interfacial reaction

(2020) Yufei Liu et al.   Journal of Materials Research and Technology-JMR&T

Biodegradable UV-Blocking Films through Core–Shell Lignin–Melanin Nanoparticles in Poly(butylene adipate-co-terephthalate)

(2019) Qianqiu Xing et al.   ACS Sustainable Chemistry & Engineering

Photochemical Transformation of Poly(butylene adipate-co-terephthalate) and Its Effects on Enzymatic Hydrolyzability

(2019) Guilhem X. De Hoe et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

Introduction of primary chemical bonding in lignin-based PP composites for mechanical reinforcement via reactive extrusion

(2019) Bo Min Gil et al.   COMPOSITES PART B-ENGINEERING

Synthesis and characterization of biodegradable aliphatic‐aromatic nanocomposites fabricated using maleic acid‐grafted poly(butylene adipate‐co‐terephthalate) and organically modified layered zinc phenylphosphonate

(2019) Hsiang‐Ting Wang et al.   POLYMER INTERNATIONAL

Rubber Toughening of Polylactic Acid (PLA) with Poly(butylene adipate-co-terephthalate) (PBAT): Mechanical Properties, Fracture Mechanics and Analysis of Ductile-to-Brittle Behavior while Varying Temperature and Test Speed

(2019) Vito Gigante et al.   EUROPEAN POLYMER JOURNAL

One-pot scalable fabrication of an oligomeric phosphoramide towards high-performance flame retardant polylactic acid with a submicron-grained structure

(2019) Yijiao Xue et al.   COMPOSITES PART B-ENGINEERING

Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability

(2019) Mohamed Dammak et al.   INDUSTRIAL CROPS AND PRODUCTS

Effect of lignin as accelerator of the biodegradation process of poly(lactic acid)/lignin composites

(2019) Thaís Ferreira da Silva et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Strong and biocompatible lignin /poly (3-hydroxybutyrate) composite nanofibers

(2018) Dan Kai et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Compatibilization of starch/poly(butylene adipate-co- terephthalate) blown films using itaconic acid and sodium hypophosphite

(2018) Patrícia S. Garcia et al.   JOURNAL OF APPLIED POLYMER SCIENCE

The effect of MDI on the structure and mechanical properties of poly(lactic acid) and poly(butylene adipate-co-butylene terephthalate) blends

(2018) Hongwei Pan et al.   RSC Advances

Preparation and Characteristics of Poly(butylene adipate-co-terephthalate)/Polylactide Blend Films via Synergistic Efficiency of Plasticization and Compatibilization

(2018) Worasak Phetwarotai et al.   CHINESE JOURNAL OF POLYMER SCIENCE

Enhanced mechanical and thermal properties of γ-allyloxymethyl 18-crown-6 and polyimide composites through hydrosilylation crosslinking

(2018) Chuqi Shi et al.   CHINESE CHEMICAL LETTERS

Adhesion properties of poly(ethylene oxide)-lignin blend for nanocellulose composites

(2018) Tippabattini Jayaramudu et al.   COMPOSITES PART B-ENGINEERING

A green physical approach to compatibilize a bio-based poly (lactic acid)/lignin blend for better mechanical, thermal and degradation properties

(2018) Ashish Kumar et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Influence of biodegradation on crystallization of poly (butylene adipate-co-terephthalate)

(2018) Petr Svoboda et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Some nanomechanical properties and degree of branching of electron beam modified polyamide 6

(2017) Shib Shankar Banerjee et al.   EUROPEAN POLYMER JOURNAL

Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender

(2017) Paula Alessandra Palsikowski et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

An overview on properties and applications of poly(butylene adipate-co -terephthalate)-PBAT based composites

(2017) Filipe V. Ferreira et al.   POLYMER ENGINEERING AND SCIENCE

Graft Polymerization of Acrylic Monomers onto Lignin with CaCl2–H2O2 as Initiator: Preparation, Mechanism, Characterization, and Application in Poly(lactic acid)

(2017) Enmin Zong et al.   ACS Sustainable Chemistry & Engineering

Biodegradable and High-Performance Poly(butylene adipate-co-terephthalate)–Lignin UV-Blocking Films

(2017) Qianqiu Xing et al.   ACS Sustainable Chemistry & Engineering

Super-Robust Polylactide Barrier Films by Building Densely Oriented Lamellae Incorporated with Ductile in Situ Nanofibrils of Poly(butylene adipate-co-terephthalate)

(2016) Sheng-Yang Zhou et al.   ACS Applied Materials & Interfaces

Converting Industrial Alkali Lignin to Biobased Functional Additives for Improving Fire Behavior and Smoke Suppression of Polybutylene Succinate

(2016) Lina Liu et al.   ACS Sustainable Chemistry & Engineering

Hyperbranched polysiloxane (HBPSi)-based polyimide films with ultralow dielectric permittivity, desirable mechanical and thermal properties

(2016) Xingfeng Lei et al.   Journal of Materials Chemistry C

Thermo-mechanical characterization of bioblends from polylactide and poly(butylene adipate-co-terephthalate) and lignin

(2015) Mohamed A. Abdelwahab et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Ionic liquids–lignin combination: an innovative way to improve mechanical behaviour and water vapour permeability of eco-designed biodegradable polymer blends

(2015) Sébastien Livi et al.   RSC Advances

Biobased Ternary Blends of Lignin, Poly(Lactic Acid), and Poly(Butylene Adipate-co-Terephthalate): The Effect of Lignin Heterogeneity on Blend Morphology and Compatibility

(2014) Richard Chen et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Effect of Lignin Incorporation and Reactive Compatibilization on the Morphological, Rheological, and Mechanical Properties of ABS Resin

(2012) Pingan Song et al.   Journal of Macromolecular Science Part B-Physics

Functionalized lignin by grafting phosphorus-nitrogen improves the thermal stability and flame retardancy of polypropylene

(2012) Youming Yu et al.   POLYMER DEGRADATION AND STABILITY

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

(2011) Shan Liu et al.   Journal of Macromolecular Science Part B-Physics

Thermal degradation and flame retardancy properties of ABS/lignin: Effects of lignin content and reactive compatibilization

(2011) Pingan Song et al.   THERMOCHIMICA ACTA