A new perspective on the composition-structure-property relationships on Nb/Mo/Cr-doped O3-type layered oxide as cathode materials for sodium-ion batteries

Designed Formation of Double‐Shelled Ni–Fe Layered‐Double‐Hydroxide Nanocages for Efficient Oxygen Evolution Reaction

(2020) Jintao Zhang et al.   ADVANCED MATERIALS

Insight into electronic structure and optical properties of Nb and F co-doped SnO2 with hybrid functional theoretical method

(2020) Gui Wang et al.   CERAMICS INTERNATIONAL

The Role of Divalent (Zn2+/Mg2+/Cu2+) Substituents in Achieving Full Capacity of Sodium Layered Oxides for Na-Ion Battery Applications

(2020) Sathiya Mariyappan et al.   CHEMISTRY OF MATERIALS

Dissociate lattice oxygen redox reactions from capacity and voltage drops of battery electrodes

(2020) Jinpeng Wu et al.   Science Advances

Revisiting the Stability of the Cr4+/Cr3+ Redox Couple in NASICON Compounds

(2020) Jiansheng Zhang et al.   ACS Applied Materials & Interfaces

Evolution of TiOx-SiOx nano-composite during annealing of ultrathin titanium oxide films on Si substrate

(2020) Isha Yadav et al.   CERAMICS INTERNATIONAL

The effect of the heteroatom (X=P, As, Si and Ge) on the geometrical and electronic properties of α-Keggin polyoxometalates (M=Mo, W and Nb) – A DFT investigation

(2020) Fernando Steffler et al.   JOURNAL OF MOLECULAR STRUCTURE

Enhancing the Electrochemical Performance of NaCrO2 through Structural Defect Control

(2020) Mei Luo et al.   ACS Applied Energy Materials

Improved electrochemical performance of P2-type Na0.67Lix(Mn0.5Fe0.25Co0.25)1−xO2 cathode materials from Li ion substitution of the transition metal ions

(2019) Tingjian Lv et al.   JOURNAL OF MATERIALS SCIENCE

Enhanced Electrochemical Performance of Li1.27Cr0.2Mn0.53O2 Layered Cathode Materials via a Nanomilling-Assisted Solid-state Process

(2019) Chengkang Chang et al.   Materials

Co-Substitution Enhances the Rate Capability and Stabilizes the Cyclic Performance of O3-Type Cathode NaNi0.45–xMn0.25Ti0.3CoxO2 for Sodium-Ion Storage at High Voltage

(2019) Chaojin Zhou et al.   ACS Applied Materials & Interfaces

What Limits the Capacity of Layered Oxide Cathodes in Lithium Batteries?

(2019) Hui Zhou et al.   ACS Energy Letters

O3-type NaNi0.5Mn0.5O2 hollow microbars with exposed {0 1 0} facets as high performance cathode materials for sodium-ion batteries

(2019) Qianjiang Mao et al.   CHEMICAL ENGINEERING JOURNAL

Synthesis of Copper-Substituted CoS2 @Cu x S Double-Shelled Nanoboxes by Sequential Ion Exchange for Efficient Sodium Storage

(2019) Yongjin Fang et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Superior electrochemical performance of O3-type NaNi0.5-xMn0.3Ti0.2ZrxO2 cathode material for sodium-ion batteries from Ti and Zr substitution of the transition metals

(2019) Mingzhe Leng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

New Insights into the Roles of Mg in Improving the Rate Capability and Cycling Stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for Sodium-Ion Batteries

(2018) Cheng Zhang et al.   ACS Applied Materials & Interfaces

Synthesis and Electrochemistry of O3-type NaFeO2–NaCo0.5Ni0.5O2 Solid Solutions for Na-Ion Positive Electrodes

(2018) J. S. Thorne et al.   ACS Applied Materials & Interfaces

Cu2+ Dual-Doped Layer-Tunnel Hybrid Na0.6Mn1–xCuxO2 as a Cathode of Sodium-Ion Battery with Enhanced Structure Stability, Electrochemical Property, and Air Stability

(2018) Ting-Ru Chen et al.   ACS Applied Materials & Interfaces

Probing Thermal and Chemical Stability of NaxNi1/3Fe1/3Mn1/3O2 Cathode Material toward Safe Sodium-Ion Batteries

(2018) Yingying Xie et al.   CHEMISTRY OF MATERIALS

Reversible Multi-Electron Transfer of Cr 2.8+ /Cr 4.4+ in O3-Type Layered Na 0.66 Fe 1/3 Cr 1/3 Ti 1/3 O 2 for Sodium-Ion Batteries

(2018) Minghui Cao et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Insight into Ca-Substitution Effects on O3-Type NaNi1/3 Fe1/3 Mn1/3 O2 Cathode Materials for Sodium-Ion Batteries Application

(2018) Liqi Sun et al.   Small

A Chemical Approach to Raise Cell Voltage and Suppress Phase Transition in O3 Sodium Layered Oxide Electrodes

(2018) Mariyappan Sathiya et al.   Advanced Energy Materials

A high rate capability and long lifespan symmetric sodium-ion battery system based on a bipolar material Na2LiV2(PO4)3/C

(2018) Meng Li et al.   Journal of Materials Chemistry A

Study on degradation behavior of commercial 18650 LiAlNiCoO 2 cells in over‐charge conditions

(2018) Depeng Kong et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Electronic Structure and Comparative Properties of LiNixMnyCozO2 Cathode Materials

(2017) Hong Sun et al.   Journal of Physical Chemistry C

Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries

(2017) Hu-Rong Yao et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

High Energy Density Sodium-Ion Battery with Industrially Feasible and Air-Stable O3-Type Layered Oxide Cathode

(2017) Jianqiu Deng et al.   Advanced Energy Materials

Layered-to-Rock-Salt Transformation in Desodiated NaxCrO2 (x 0.4)

(2016) Shou-Hang Bo et al.   CHEMISTRY OF MATERIALS

Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance

(2016) Shaohua Guo et al.   NPG Asia Materials

A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries

(2015) Man Huon Han et al.   Energy & Environmental Science

Synthesis and characterization of LiNi0.5Co0.2Mn0.3O2 cathode material prepared by a novel hydrothermal process

(2014) Yunjiao Li et al.   CERAMICS INTERNATIONAL

Identifying the Critical Role of Li Substitution in P2–Nax[LiyNizMn1–y–z]O2 (0 < x, y, z < 1) Intercalation Cathode Materials for High-Energy Na-Ion Batteries

(2014) Jing Xu et al.   CHEMISTRY OF MATERIALS

O3-type Na(Mn0.25Fe0.25Co0.25Ni0.25)O2: A quaternary layered cathode compound for rechargeable Na ion batteries

(2014) Xin Li et al.   ELECTROCHEMISTRY COMMUNICATIONS

New Insight into Structural Evolution in Layered NaCrO2 during Electrochemical Sodium Extraction

(2014) Kei Kubota et al.   Journal of Physical Chemistry C

Uniform and continuous carbon coated sodium vanadium phosphate cathode materials for sodium-ion battery

(2014) Lulu Si et al.   JOURNAL OF POWER SOURCES

Direct visualization of the Jahn–Teller effect coupled to Na ordering in Na 5/8 MnO 2

(2014) Xin Li et al.   NATURE MATERIALS

Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries

(2012) Jing-Jing Ding et al.   ELECTROCHEMISTRY COMMUNICATIONS

Na-ion batteries, recent advances and present challenges to become low cost energy storage systems

(2012) Verónica Palomares et al.   Energy & Environmental Science

Study on the Reversible Electrode Reaction of Na1–xNi0.5Mn0.5O2 for a Rechargeable Sodium-Ion Battery

(2012) Shinichi Komaba et al.   INORGANIC CHEMISTRY

Structural and Electrochemical Characterizations on Li2MnO3-LiCoO2-LiCrO2System as Positive Electrode Materials for Rechargeable Lithium Batteries

(2012) Naoaki Yabuuchi et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

A novel method for preparation of macroposous lithium nickel manganese oxygen as cathode material for lithium ion batteries

(2011) Xiaoya Wang et al.   ELECTROCHIMICA ACTA

Rapid Synthesis of Li4Ti5O12 Microspheres as Anode Materials and Its Binder Effect for Lithium-Ion Battery

(2011) Shu-Lei Chou et al.   Journal of Physical Chemistry C

Structural and Electrochemical Characterizations of Solution Derived LiMn[sub 0.5]Ni[sub 0.5]O[sub 2] as Positive Electrode for Li-Ion Rechargeable Batteries

(2008) N. K. Karan et al.   ELECTROCHEMICAL AND SOLID STATE LETTERS

On the Origin of Alternating Bond Distortions and the Emergence of Chirality in Polyoxometalate Anions

(2008) Likai Yan et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY