- Home
- Publications
- Publication Search
- Publication Details
Title
Mix design concepts for 3D printable concrete: A review
Authors
Keywords
3D concrete printing, Printable concrete, Mix design, Printability, Rheological properties, Static yield stress
Journal
CEMENT & CONCRETE COMPOSITES
Volume 122, Issue -, Pages 104155
Publisher
Elsevier BV
Online
2021-06-30
DOI
10.1016/j.cemconcomp.2021.104155
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies
- (2020) Li Wang et al. CEMENT & CONCRETE COMPOSITES
- Evaluating the printability of concretes containing lightweight coarse aggregates
- (2020) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite
- (2020) Mingxu Chen et al. COMPOSITES PART B-ENGINEERING
- Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing
- (2020) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing
- (2020) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Yield stress criteria to assess the buildability of 3D concrete printing
- (2020) R. Jayathilakage et al. CONSTRUCTION AND BUILDING MATERIALS
- Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield Stress and Structural Build-Up of Fresh Concrete
- (2020) Irina Ivanova et al. Materials
- Opportunities and challenges for structural engineering of digitally fabricated concrete
- (2020) Costantino Menna et al. CEMENT AND CONCRETE RESEARCH
- On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
- (2020) Victor C. Li et al. CEMENT AND CONCRETE RESEARCH
- 3-D printing of concrete: Beyond horizons
- (2020) Mohammad S. Khan et al. CEMENT AND CONCRETE RESEARCH
- Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
- (2020) Yu Chen et al. CEMENT AND CONCRETE RESEARCH
- Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machine
- (2020) Zhixin Liu et al. COMPOSITES PART B-ENGINEERING
- Mechanical behavior of 3D printed mortar with recycled sand at early ages
- (2020) Tao Ding et al. CONSTRUCTION AND BUILDING MATERIALS
- Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings
- (2020) Xinjian Li et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink
- (2020) Xiaoyan Sun et al. CONSTRUCTION AND BUILDING MATERIALS
- Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
- (2020) Luong Pham et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D extrusion free forming of geopolymer composites: Materials modification and processing optimization
- (2020) Chenchen Sun et al. JOURNAL OF CLEANER PRODUCTION
- Fresh and Hardened Properties of Extrusion-Based 3D-Printed Cementitious Materials: A Review
- (2020) Zhanzhao Li et al. Sustainability
- A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders
- (2020) Sooraj A.O. Nair et al. CEMENT & CONCRETE COMPOSITES
- Hardened properties of layered 3D printed concrete with recycled sand
- (2020) Tao Ding et al. CEMENT & CONCRETE COMPOSITES
- 3D-printable lightweight foamed concrete and comparison with classical foamed concrete in terms of fresh state properties and mechanical strength
- (2020) Devid Falliano et al. CONSTRUCTION AND BUILDING MATERIALS
- A rheology-based quasi-static shape retention model for digitally fabricated concrete
- (2020) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Energy-saving potential of 3D printed concrete building with integrated living wall
- (2020) Yawen He et al. ENERGY AND BUILDINGS
- Environmental and economic assessment on 3D printed buildings with recycled concrete
- (2020) Yilong Han et al. JOURNAL OF CLEANER PRODUCTION
- Rheological and harden properties of the high-thixotropy 3D printing concrete
- (2019) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
- (2019) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
- (2019) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
- (2019) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- A systematical review of 3D printable cementitious materials
- (2019) Bing Lu et al. CONSTRUCTION AND BUILDING MATERIALS
- Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
- (2019) Venkatesh Naidu Nerella et al. CONSTRUCTION AND BUILDING MATERIALS
- Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
- (2019) Taylor Marchment et al. MATERIALS & DESIGN
- Material Design and Performance Evaluation of Foam Concrete for Digital Fabrication
- (2019) Markin et al. Materials
- Volume-forming 3D concrete printing using a variable-size square nozzle
- (2019) Jie Xu et al. AUTOMATION IN CONSTRUCTION
- Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin
- (2019) Emmanuel Keita et al. CEMENT AND CONCRETE RESEARCH
- Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
- (2019) Fatemeh Hamidi et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D concrete printing: A lower bound analytical model for buildability performance quantification
- (2019) Jacques Kruger et al. AUTOMATION IN CONSTRUCTION
- Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
- (2019) Viktor Mechtcherine et al. AUTOMATION IN CONSTRUCTION
- Synthesis and characterization of 3D-printable geopolymeric foams for thermally efficient building envelope materials
- (2019) Hussam Alghamdi et al. CEMENT & CONCRETE COMPOSITES
- Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content
- (2019) Chao Zhang et al. CEMENT & CONCRETE COMPOSITES
- A review of the current progress and application of 3D printed concrete
- (2019) Jingchuan Zhang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Printability region for 3D concrete printing using slump and slump flow test
- (2019) Yi Wei Daniel Tay et al. COMPOSITES PART B-ENGINEERING
- Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
- (2019) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
- (2019) Jacques Kruger et al. CONSTRUCTION AND BUILDING MATERIALS
- Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
- (2019) Binrong Zhu et al. MATERIALS & DESIGN
- Mesh reinforcing method for 3D Concrete Printing
- (2019) Taylor Marchment et al. AUTOMATION IN CONSTRUCTION
- A review on mixture design methods for geopolymer concrete
- (2019) Ning Li et al. COMPOSITES PART B-ENGINEERING
- 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
- (2019) Jacques Kruger et al. COMPOSITES PART B-ENGINEERING
- Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite
- (2019) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Mechanical characterization of 3D printable concrete
- (2019) A.V. Rahul et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of curved concrete surfaces using Adaptable Membrane Formwork
- (2019) Jian Hui Lim et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of the printing method and mortar’s workability on pull-out strength of 3D printed elements
- (2019) Bilal Baz et al. CONSTRUCTION AND BUILDING MATERIALS
- A feasible method for measuring the buildability of fresh 3D printing mortar
- (2019) Qiang Yuan et al. CONSTRUCTION AND BUILDING MATERIALS
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- A self-reinforced cementitious composite for building-scale 3D printing
- (2018) Daniel G. Soltan et al. CEMENT & CONCRETE COMPOSITES
- Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
- (2018) R.J.M. Wolfs et al. CEMENT AND CONCRETE RESEARCH
- 3D printing using concrete extrusion: A roadmap for research
- (2018) R.A. Buswell et al. CEMENT AND CONCRETE RESEARCH
- Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
- (2018) Delphine Marchon et al. CEMENT AND CONCRETE RESEARCH
- Rethinking reinforcement for digital fabrication with concrete
- (2018) Domenico Asprone et al. CEMENT AND CONCRETE RESEARCH
- Rheological requirements for printable concretes
- (2018) Nicolas Roussel CEMENT AND CONCRETE RESEARCH
- Digital in situ fabrication - Challenges and opportunities for robotic in situ fabrication in architecture, construction, and beyond
- (2018) Jonas Buchli et al. CEMENT AND CONCRETE RESEARCH
- Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
- (2018) Ye Qian et al. CEMENT AND CONCRETE RESEARCH
- Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
- (2018) Biranchi Panda et al. CERAMICS INTERNATIONAL
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Fresh properties of a novel 3D printing concrete ink
- (2018) Yu Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of mineral admixtures on the structural build-up of cement paste
- (2018) Qiang Yuan et al. CONSTRUCTION AND BUILDING MATERIALS
- Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete
- (2018) R.J.M. Wolfs et al. CONSTRUCTION AND BUILDING MATERIALS
- Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
- (2018) Guowei Ma et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour
- (2018) Viktor Mechtcherine et al. CONSTRUCTION AND BUILDING MATERIALS
- Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Effect of surface moisture on inter-layer strength of 3D printed concrete
- (2018) Jay G. Sanjayan et al. CONSTRUCTION AND BUILDING MATERIALS
- Robustness of self-compacting recycled concrete: analysis of sensitivity parameters
- (2018) Iris González-Taboada et al. MATERIALS AND STRUCTURES
- Measurement of tensile bond strength of 3D printed geopolymer mortar
- (2018) Biranchi Panda et al. MEASUREMENT
- A review of 3D concrete printing systems and materials properties: current status and future research prospects
- (2018) Suvash Chandra Paul et al. RAPID PROTOTYPING JOURNAL
- Inline quantification of extrudability of cementitious materials for digital construction
- (2018) V.N. Nerella et al. CEMENT & CONCRETE COMPOSITES
- Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
- (2018) Yiwei Weng et al. CONSTRUCTION AND BUILDING MATERIALS
- Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials
- (2018) Mingxu Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
- (2018) Hiroki Ogura et al. Materials
- Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
- (2018) Biranchi Panda et al. CEMENT & CONCRETE COMPOSITES
- Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
- (2018) V.N. Nerella et al. CEMENT AND CONCRETE RESEARCH
- Toward the prediction of rheological properties of self-consolidating concrete as diphasic material
- (2018) K. Daddy Kabagire et al. CONSTRUCTION AND BUILDING MATERIALS
- Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
- (2018) Zhixin Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printable concrete: Mixture design and test methods
- (2018) A.V. Rahul et al. CEMENT & CONCRETE COMPOSITES
- Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
- (2018) Biranchi Panda et al. COMPOSITES PART B-ENGINEERING
- Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall
- (2017) Isolda Agustí-Juan et al. JOURNAL OF CLEANER PRODUCTION
- Additive manufacturing of geopolymer for sustainable built environment
- (2017) Biranchi Panda et al. JOURNAL OF CLEANER PRODUCTION
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- Investigation of concrete mixtures for additive construction
- (2017) Todd S. Rushing et al. RAPID PROTOTYPING JOURNAL
- A critical review of the use of 3-D printing in the construction industry
- (2016) Peng Wu et al. AUTOMATION IN CONSTRUCTION
- How do concrete rheology, tribology, flow rate and pipe radius influence pumping pressure?
- (2016) Dimitri Feys et al. CEMENT & CONCRETE COMPOSITES
- A review on ultra high performance concrete: Part I. Raw materials and mixture design
- (2015) Caijun Shi et al. CONSTRUCTION AND BUILDING MATERIALS
- Structural built-up of cement-based materials used for 3D-printing extrusion techniques
- (2015) A. Perrot et al. MATERIALS AND STRUCTURES
- Prediction of Concrete Pumping Using Various Rheological Models
- (2014) Myoung Sung Choi et al. International Journal of Concrete Structures and Materials
- Lubrication layer properties during concrete pumping
- (2013) Myoungsung Choi et al. CEMENT AND CONCRETE RESEARCH
- Testing pumpability of concrete using Sliding Pipe Rheometer
- (2013) Viktor Mechtcherine et al. CONSTRUCTION AND BUILDING MATERIALS
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays
- (2012) Shiho Kawashima et al. CONSTRUCTION AND BUILDING MATERIALS
- Mix design and fresh properties for high-performance printing concrete
- (2012) T. T. Le et al. MATERIALS AND STRUCTURES
- Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
- (2012) Arnoud Perrot et al. RHEOLOGICA ACTA
- Developments in construction-scale additive manufacturing processes
- (2011) S. Lim et al. AUTOMATION IN CONSTRUCTION
- On the early-age behavior of zero-slump concrete
- (2011) G. Hüsken et al. CEMENT AND CONCRETE RESEARCH
- The origins of thixotropy of fresh cement pastes
- (2011) N. Roussel et al. CEMENT AND CONCRETE RESEARCH
- Valorization of micro-cellulose fibers in self-compacting concrete
- (2010) M.A.S. Mohamed et al. CONSTRUCTION AND BUILDING MATERIALS
- Using Fly Ash, Clay, and Fibers for Simultaneous Improvement of Concrete Green Strength and Consolidatability for Slip-Form Pavement
- (2010) Thomas Voigt et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Yield stress during setting of cement pastes from penetration tests
- (2009) D. Lootens et al. CEMENT AND CONCRETE RESEARCH
- Critical chloride content in reinforced concrete — A review
- (2009) Ueli Angst et al. CEMENT AND CONCRETE RESEARCH
- Influence of clays on the rheology of cement pastes
- (2009) Nathan A. Tregger et al. CEMENT AND CONCRETE RESEARCH
- Effect of Particle Density on Its Rebound in Dry-Mix Shotcrete
- (2009) Vivek Bindiganavile et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Correlating slump, slump flow, vebe and flow tests to rheological parameters of high-performance concrete
- (2009) Aminul Islam Laskar Materials Research-Ibero-american Journal of Materials
- Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials
- (2008) Fabien Mahaut et al. CEMENT AND CONCRETE RESEARCH
- Homogenization approach to the behavior of suspensions of noncolloidal particles in yield stress fluids
- (2008) Xavier Chateau et al. JOURNAL OF RHEOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started