Pore-scale numerical simulation of convection heat transfer in high porosity open-cell metal foam under rotating conditions

Metal foam/PCM melting evolution analysis: Orientation and morphology effects

(2021) Marcello Iasiello et al.   APPLIED THERMAL ENGINEERING

Heat transfer in a rotating rectangular channel (AR = 4) with dimples and sidewall bleeds

(2020) Guoqiang Xu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Pore-scale simulation of forced convection heat transfer under turbulent conditions in open-cell metal foam

(2020) Mingrui Sun et al.   CHEMICAL ENGINEERING JOURNAL

Anisotropic convective heat transfer in open-cell metal foams: Assessment and correlations

(2020) Marcello Iasiello et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Multi-objective optimization of finned metal foam heat sinks: Tradeoff between heat transfer and pressure drop

(2020) Nicola Bianco et al.   APPLIED THERMAL ENGINEERING

Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change material-metal foam

(2019) Mohammad Ghalambaz et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

An anisotropic turbulence model for predicting heat transfer in a rotating channel

(2019) Chuanjie Zhang et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Development of secondary flow field under rotating condition in a straight channel with square cross-section

(2018) Ruquan YOU et al.   Chinese Journal of Aeronautics

Experimental investigations and correlation development of convective heat transfer in a rotating smooth channel

(2018) S.M. Hosseinalipour et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Numerical simulations of two-phase flow in open-cell metal foams with application to aero-engine separators

(2018) Zhengwei Nie et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Direct Simulation of Interstitial Heat Transfer Coefficient Between Paraffin and High Porosity Open-Cell Metal Foam

(2017) Yuanpeng Yao et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

The effect of open-cell metal foams strut shape on convection heat transfer and pressure drop

(2016) Giuseppe Ambrosio et al.   APPLIED THERMAL ENGINEERING

Studies of CO2 absorption and effective interfacial area in a two-stage rotating packed bed with nickel foam packing

(2015) Guang-Wen Chu et al.   CHEMICAL ENGINEERING AND PROCESSING

Hydrodynamically and thermally developing flow in a rectangular channel filled with a high porosity fiber and rotating about a parallel axis

(2015) Ahmed Alhusseny et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Developing convective flow in a square channel partially filled with a high porosity metal foam and rotating in a parallel-mode

(2015) Ahmed Alhusseny et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Effects of centrifugal buoyancy on developing convective laminar flow in a square channel occupied with a high porosity fibrous medium

(2015) Ahmed Alhusseny et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam

(2015) Shangsheng Feng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

A new prediction model for the effective thermal conductivity of high porosity open-cell metal foams

(2015) Yuanpeng Yao et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Lord Kelvin and Weaire–Phelan Foam Models: Heat Transfer and Pressure Drop

(2015) Salvatore Cunsolo et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

Modelling open cell-foams based on the Weaire–Phelan unit cell with a minimal surface energy approach

(2014) B. Buffel et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Heat transfer study in rotating smooth square U-duct at high rotation numbers

(2013) Hongwu Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Pressure drop correlation for ceramic and metal sponges

(2012) Benjamin Dietrich   CHEMICAL ENGINEERING SCIENCE

Flow, thermal and structural application of Ni-foam as volumetric solar receiver

(2012) N. Michailidis et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin

(2011) W.Q. Li et al.   APPLIED THERMAL ENGINEERING

A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals

(2011) Y. Tian et al.   ENERGY

Estimation of Surface Tensions of Paraffin Hydrocarbons Using a Novel Predictive Tool Approach and Vandermonde Matrix

(2011) Alireza Bahadori   ENERGY & FUELS

Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container

(2011) S.F. Hosseinizadeh et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Restrictions on the Validity of the Thermal Conditions at the Porous-Fluid Interface—An Exact Solution

(2011) Kun Yang et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME

3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam

(2010) A. Kopanidis et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Analysis of temperature gradient bifurcation in porous media – An exact solution

(2010) Kun Yang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental analysis of the pressure drop and heat transfer through metal foams used as volumetric receivers under concentrated solar radiation

(2008) C. Albanakis et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE