Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy

Additive Manufacturing of Co-Ni-Ga High-Temperature Shape Memory Alloy: Processability and Phase Transformation Behavior

(2020) C. Lauhoff et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Tuning the operation temperature window of the elastocaloric effect in Cu–Al–Mn shape memory alloys by composition design

(2020) Hui Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of element evaporation on the microstructure and properties of CuZnAl shape memory alloys prepared by selective laser melting

(2020) Linrong Zhuo et al.   OPTICS AND LASER TECHNOLOGY

Processing parameters in laser powder bed fusion metal additive manufacturing

(2020) J.P. Oliveira et al.   MATERIALS & DESIGN

Process optimization, microstructures and mechanical properties of a Cu-based shape memory alloy fabricated by selective laser melting

(2019) Jian Tian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Properties of soft magnetic Fe-Co-V alloy produced by laser powder bed fusion

(2019) Tuomas Riipinen et al.   RAPID PROTOTYPING JOURNAL

Elastocaloric effect with small hysteresis in bamboo-grained Cu–Al–Mn microwires

(2019) Bo Yuan et al.   JOURNAL OF MATERIALS SCIENCE

Excellent superelasticity of Cu-Al-Mn-Cr shape memory single crystal obtained only through annealing cast polycrystalline alloy

(2019) Shuiyuan Yang et al.   SCRIPTA MATERIALIA

Enhancement of the Damping Behavior of Ti 6 Al 4 V Alloy through the Use of Trabecular Structure Produced by Selective Laser Melting

(2019) Jacopo Fiocchi et al.   ADVANCED ENGINEERING MATERIALS

Evolution of functional properties realized by increasing laser scanning speed for the selective laser melting fabricated NiTi alloy

(2019) Y. Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Magnetic-field-induced strain-glass-to-martensite transition in a Fe-Mn-Ga alloy

(2019) Xiaoming Sun et al.   ACTA MATERIALIA

On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi

(2018) Soheil Saedi et al.   ACTA MATERIALIA

Recent Progress in Shape Memory Alloys

(2018) Ryosuke Kainuma   MATERIALS TRANSACTIONS

Selective laser remelting of an additively manufactured Cu-Al-Ni-Mn shape-memory alloy

(2018) Tobias Gustmann et al.   MATERIALS & DESIGN

A Short Review on the Microstructure, Transformation Behavior and Functional Properties of NiTi Shape Memory Alloys Fabricated by Selective Laser Melting

(2018) Xiebin Wang et al.   Materials

Design of novel materials for additive manufacturing - Isotropic microstructure and high defect tolerance

(2018) J. Günther et al.   Scientific Reports

On the printability and transformation behavior of nickel-titanium shape memory alloys fabricated using laser powder-bed fusion additive manufacturing

(2018) M. Mahmoudi et al.   Journal of Manufacturing Processes

Structural components manufactured by Selective Laser Melting and Investment Casting—Impact of the process route on the damage mechanism under cyclic loading

(2017) S. Leuders et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys

(2017) Soheil Saedi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of dynamic aging on the cyclic stability of Cu 73 Al 16 Mn 11 shape memory alloy

(2017) N. Babacan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Relationship between grain size and thermal hysteresis of martensitic transformations in Cu-based shape memory alloys

(2017) P. La Roca et al.   SCRIPTA MATERIALIA

Effects of cyclic heat treatment and aging on superelasticity in oligocrystalline Fe-Mn-Al-Ni shape memory alloy wires

(2017) H. Ozcan et al.   SCRIPTA MATERIALIA

Superelastic fatigue of columnar-grained Cu-Al-Mn shape memory alloy under cyclic tension at high strain

(2017) Ji-Li Liu et al.   SCRIPTA MATERIALIA

The effects of cold rolling and the subsequent heat treatments on the shape memory and the superelasticity characteristics of Cu73Al16Mn11 shape memory alloy

(2017) N Babacan et al.   Smart Materials and Structures

Ultra-large single crystals by abnormal grain growth

(2017) Tomoe Kusama et al.   Nature Communications

Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys

(2017) J.P. Oliveira et al.   MATERIALS & DESIGN

Superelasticity and shape memory effect in Cu–Al–Mn–V shape memory alloys

(2017) Shuiyuan Yang et al.   MATERIALS & DESIGN

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

(2016) Murillo Romero da Silva et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural Evolution and Functional Properties of Fe-Mn-Al-Ni Shape Memory Alloy Processed by Selective Laser Melting

(2016) Thomas Niendorf et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys

(2016) J.P. Oliveira et al.   MATERIALS & DESIGN

Laser welded superelastic Cu–Al–Mn shape memory alloy wires

(2016) J.P. Oliveira et al.   MATERIALS & DESIGN

Relationship between martensitic plate size and austenitic grain size in martensitic transformations

(2015) P. La Roca et al.   APPLIED PHYSICS LETTERS

Damage evolution in pseudoelastic polycrystalline Co–Ni–Ga high-temperature shape memory alloys

(2015) Malte Vollmer et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting

(2015) Piter Gargarella et al.   Materials Research-Ibero-american Journal of Materials

Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

(2015) T. Niendorf et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Superelastic anisotropy characteristics of columnar-grained Cu–Al–Mn shape memory alloys and its potential applications

(2015) Ji-Li Liu et al.   MATERIALS & DESIGN

Controlling of Transformation Temperatures of Cu-Al-Mn Shape Memory Alloys by Chemical Composition

(2014) C. Aksu Canbay et al.   ACTA PHYSICA POLONICA A

Functionally Graded Alloys Obtained by Additive Manufacturing

(2014) Thomas Niendorf et al.   ADVANCED ENGINEERING MATERIALS

Effect of SLM Parameters on Transformation Temperatures of Shape Memory Nickel Titanium Parts

(2014) Sasan Dadbakhsh et al.   ADVANCED ENGINEERING MATERIALS

The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy

(2014) Luke N. Carter et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Metal Additive Manufacturing: A Review

(2014) William E. Frazier   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

The roles of grain orientation and grain boundary characteristics in the enhanced superelasticity of Cu71.8Al17.8Mn10.4 shape memory alloys

(2014) Ji-Li Liu et al.   MATERIALS & DESIGN

On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing

(2014) Christoph Haberland et al.   Smart Materials and Structures

A review of shape memory alloy research, applications and opportunities

(2013) Jaronie Mohd Jani et al.   MATERIALS & DESIGN

Two- and Three-Dimensional Grain Growth in the Cu–Al–Mn Shape Memory Alloy

(2013) Tomoe Kusama et al.   MATERIALS TRANSACTIONS

Abnormal Grain Growth Induced by Cyclic Heat Treatment

(2013) T. Omori et al.   SCIENCE

Feasibility of Cu–Al–Mn superelastic alloy bars as reinforcement elements in concrete beams

(2013) Kshitij C Shrestha et al.   Smart Materials and Structures

Evidence for ferromagnetic strain glass in Ni-Co-Mn-Ga Heusler alloy system

(2012) Yu Wang et al.   APPLIED PHYSICS LETTERS

Laser additive manufacturing of metallic components: materials, processes and mechanisms

(2012) D D Gu et al.   INTERNATIONAL MATERIALS REVIEWS

Tailoring Selective Laser Melting Process Parameters for NiTi Implants

(2012) Therese Bormann et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Stability of thermal-induced phase transformations in the severely deformed equiatomic Ni–Ti alloys

(2012) K. K. Mahesh et al.   JOURNAL OF MATERIALS SCIENCE

Size effects in shape memory alloy microwires

(2010) Ying Chen et al.   ACTA MATERIALIA

Effects of ageing on bainitic and thermally induced martensitic transformations in ductile Cu–Al–Mn-based shape memory alloys

(2009) Y. Sutou et al.   ACTA MATERIALIA

Ductile Cu–Al–Mn based shape memory alloys: general properties and applications

(2008) Y. Sutou et al.   MATERIALS SCIENCE AND TECHNOLOGY

Influence of aluminum and manganese concentration on the shape memory characteristics of Cu–Al–Mn shape memory alloys

(2007) U.S. Mallik et al.   JOURNAL OF ALLOYS AND COMPOUNDS