Beyond 17% stable perovskite solar module via polaron arrangement of tuned polymeric hole transport layer

Solution-based heteroepitaxial growth of stable mixed cation/anion hybrid perovskite thin film under ambient condition via a scalable crystal engineering approach

(2020) Narges Yaghoobi Nia et al.   Nano Energy

Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules

(2020) Jia Li et al.   Joule

Analysis of the Efficiency Losses in Hybrid Perovskite/PTAA Solar Cells with Different Molecular Weights: Morphology versus Kinetics

(2020) Narges Yaghoobi Nia et al.   ACS Applied Energy Materials

The investigation of the unseen interrelationship of grain size, ionic defects, device physics and performance of perovskite solar cells

(2019) Mohsen Ameri et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices

(2019) Mojtaba Abdi-Jalebi et al.   Science Advances

Superior Stability and Efficiency Over 20% Perovskite Solar Cells Achieved by a Novel Molecularly Engineered Rutin-AgNPs/Thiophene Copolymer

(2019) Ahmed Mourtada Elseman et al.   Advanced Science

Negligible-Pb-Waste and Upscalable Perovskite Deposition Technology for High-Operational-Stability Perovskite Solar Modules

(2019) Yan Jiang et al.   Advanced Energy Materials

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

(2019) Eui Hyuk Jung et al.   NATURE

Sub-sized monovalent alkaline cations enhanced electrical stability for over 17% hysteresis-free planar perovskite solar mini-module

(2019) Tongle Bu et al.   ELECTROCHIMICA ACTA

Dodecaborane-Based Dopants Designed to Shield Anion Electrostatics Lead to Increased Carrier Mobility in a Doped Conjugated Polymer

(2019) Taylor J. Aubry et al.   ADVANCED MATERIALS

Surface passivation of perovskite film for efficient solar cells

(2019) Qi Jiang et al.   Nature Photonics

High performance perovskite sub-module with sputtered SnO2 electron transport layer

(2019) Guangfeng Bai et al.   SOLAR ENERGY

Hole-Transport Layer Molecular Weight and Doping Effects on Perovskite Solar Cell Efficiency and Mechanical Behavior

(2019) Inhwa Lee et al.   ACS Applied Materials & Interfaces

Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules

(2019) Fabio Matteocci et al.   ACS Applied Materials & Interfaces

Two-Dimensional Material Interface Engineering for Efficient Perovskite Large-Area Modules

(2019) Antonio Agresti et al.   ACS Energy Letters

Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation

(2019) Yan Jiang et al.   Nature Energy

Doping Strategy for Efficient and Stable Triple Cation Hybrid Perovskite Solar Cells and Module Based on Poly(3‐hexylthiophene) Hole Transport Layer

(2019) Narges Yaghoobi Nia et al.   Small

Phenomenological morphology design of hybrid organic-inorganic perovskite solar cell for high efficiency and less hysteresis

(2019) Mohsen Ameri et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Investigation of Hole-Transporting Poly(triarylamine) on Aggregation and Charge Transport for Hysteresisless Scalable Planar Perovskite Solar Cells

(2018) Yohan Ko et al.   ACS Applied Materials & Interfaces

Polaron formation mechanisms in conjugated polymers

(2018) Joel H. Bombile et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Up-scalable sheet-to-sheet production of high efficiency perovskite module and solar cells on 6-in. substrate using slot die coating

(2018) Francesco Di Giacomo et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Low-Temperature Soft-Cover-Assisted Hydrolysis Deposition of Large-Scale TiO2 Layer for Efficient Perovskite Solar Modules

(2018) Jinjin He et al.   Nano-Micro Letters

A crystal engineering approach for scalable perovskite solar cells and module fabrication: a full out of glove box procedure

(2018) N. Yaghoobi Nia et al.   Journal of Materials Chemistry A

Role of spiro-OMeTAD in performance deterioration of perovskite solar cells at high temperature and reuse of the perovskite films to avoid Pb-waste

(2018) Ajay Kumar Jena et al.   Journal of Materials Chemistry A

Characterising degradation of perovskite solar cells through in-situ and operando electron microscopy

(2018) Felix Utama Kosasih et al.   Nano Energy

Low-Temperature Soft-Cover-Assisted Hydrolysis Deposition of Large-Scale TiO2 Layer for Efficient Perovskite Solar Modules

(2018) Jinjin He et al.   Nano-Micro Letters

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

(2018) Nam Joong Jeon et al.   Nature Energy

Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules

(2018) Yehao Deng et al.   Nature Energy

Sequentially Fluorinated PTAA Polymers for Enhancing V OC of High-Performance Perovskite Solar Cells

(2018) Youngwoong Kim et al.   Advanced Energy Materials

Degradation Kinetics of Inverted Perovskite Solar Cells

(2018) Mejd Alsari et al.   Scientific Reports

Dynamic Disorder Dominates Delocalization, Transport, and Recombination in Halide Perovskites

(2018) Kyle T. Munson et al.   Chem

All Printable Perovskite Solar Modules with 198 cm2 Active Area and Over 6% Efficiency

(2018) Francesca De Rossi et al.   Advanced Materials Technologies

Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module

(2018) Tongle Bu et al.   Nature Communications

Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface

(2017) Kyung Taek Cho et al.   Energy & Environmental Science

Transient Optoelectronic Analysis of the Impact of Material Energetics and Recombination Kinetics on the Open-Circuit Voltage of Hybrid Perovskite Solar Cells

(2017) Scot Wheeler et al.   Journal of Physical Chemistry C

Superior stability for perovskite solar cells with 20% efficiency using vacuum co-evaporation

(2017) Xuejie Zhu et al.   Nanoscale

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules

(2017) Han Chen et al.   NATURE

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

(2017) Neha Arora et al.   SCIENCE

Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells

(2017) Woon Seok Yang et al.   SCIENCE

Selection of anti-solvent and optimization of dropping volume for the preparation of large area sub-module perovskite solar cells

(2017) Kun-Mu Lee et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

An effective method of predicting perovskite solar cell lifetime–Case study on planar CH 3 NH 3 PbI 3 and HC(NH 2 ) 2 PbI 3 perovskite solar cells and hole transfer materials of spiro-OMeTAD and PTAA

(2017) Jincheol Kim et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

One-Year stable perovskite solar cells by 2D/3D interface engineering

(2017) G. Grancini et al.   Nature Communications

Laser-Patterning Engineering for Perovskite Solar Modules With 95% Aperture Ratio

(2017) Alessandro Lorenzo Palma et al.   IEEE Journal of Photovoltaics

Humidity resistant fabrication of CH 3 NH 3 PbI 3 perovskite solar cells and modules

(2017) Joel Troughton et al.   Nano Energy

Graphene Interface Engineering for Perovskite Solar Modules: 12.6% Power Conversion Efficiency over 50 cm2 Active Area

(2017) Antonio Agresti et al.   ACS Energy Letters

Perovskite ink with wide processing window for scalable high-efficiency solar cells

(2017) Mengjin Yang et al.   Nature Energy

Decreasing Charge Losses in Perovskite Solar Cells Through mp-TiO2/MAPI Interface Engineering

(2016) Jose Manuel Marin-Beloqui et al.   CHEMISTRY OF MATERIALS

A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability

(2016) Anish Priyadarshi et al.   Energy & Environmental Science

Pinhole-free perovskite films for efficient solar modules

(2016) W. Qiu et al.   Energy & Environmental Science

The effect of PEG molecular weights on the thermal stability and dissolution behaviors of griseofulvin-PEG crystalline inclusion complexes

(2016) Xiaotong Yang et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Polaron Delocalization in Conjugated Polymer Films

(2016) Raja Ghosh et al.   Journal of Physical Chemistry C

Impact of a Mesoporous Titania–Perovskite Interface on the Performance of Hybrid Organic–Inorganic Perovskite Solar Cells

(2016) Mojtaba Abdi-Jalebi et al.   Journal of Physical Chemistry Letters

Enhancing photoluminescence yields in lead halide perovskites by photon recycling and light out-coupling

(2016) Johannes M. Richter et al.   Nature Communications

One-step fabrication of a mixed-halide perovskite film for a high-efficiency inverted solar cell and module

(2016) Chien-Hung Chiang et al.   Journal of Materials Chemistry A

Reduced graphene oxide-assisted crystallization of perovskite via solution-process for efficient and stable planar solar cells with module-scales

(2016) Jun-Seok Yeo et al.   Nano Energy

Low-Pressure Hybrid Chemical Vapor Growth for Efficient Perovskite Solar Cells and Large-Area Module

(2016) Po-Shen Shen et al.   Advanced Materials Interfaces

The Density of States and the Transport Effective Mass in a Highly Oriented Semiconducting Polymer: Electronic Delocalization in 1D

(2015) Ben Bang-Yu Hsu et al.   ADVANCED MATERIALS

Perovskite solar cells and large area modules (100 cm 2 ) based on an air flow-assisted PbI 2 blade coating deposition process

(2015) Stefano Razza et al.   JOURNAL OF POWER SOURCES

Zero-periodic metal–organic material, organic polymer composites: tuning properties of methacrylate polymers via dispersion of dodecyloxy-decorated Cu-BDC nanoballs

(2015) Mu-Seong Kim et al.   Journal of Materials Chemistry A

A dopant-free hole-transporting material for efficient and stable perovskite solar cells

(2014) Jian Liu et al.   Energy & Environmental Science

Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells

(2014) Nam Joong Jeon et al.   NATURE MATERIALS

Impact of annealing on spiro-OMeTAD and corresponding solid-state dye sensitized solar cells

(2014) Yanling Fang et al.   PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE

High efficiency photovoltaic module based on mesoscopic organometal halide perovskite

(2014) Fabio Matteocci et al.   PROGRESS IN PHOTOVOLTAICS

Protic Ionic Liquids as p-Dopant for Organic Hole Transporting Materials and Their Application in High Efficiency Hybrid Solar Cells

(2013) Antonio Abate et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

How Do Disorder, Reorganization, and Localization Influence the Hole Mobility in Conjugated Copolymers?

(2013) Sebastian T. Hoffmann et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Effects of temperature and electric field induced phase transitions on the dynamics of polarons and bipolarons

(2013) Luiz Antonio Ribeiro et al.   NEW JOURNAL OF CHEMISTRY

Hole Transport Materials with Low Glass Transition Temperatures and High Solubility for Application in Solid-State Dye-Sensitized Solar Cells

(2012) Tomas Leijtens et al.   ACS Nano

Laser Processing in Industrial Solar Module Manufacturing

(2010) Heather Booth   Journal of Laser Micro Nanoengineering