Characterization and Use of Char Produced from Pyrolysis of Post-Consumer Mixed Plastic Waste

In this work, the pyrolysis of post-consumer mixed plastic waste (polypropylene (PP), polystyrene (PS) and polyethylene film (PE)) is carried out. The solid product of the pyrolysis is characterized and tested for its use as adsorbent of lead present in aqueous media. The pyrolysis temperature has a great influence on the solid product yield, decreasing when the temperature increases. The highest yield to solid product obtained is from the pyrolysis of film at lower temperature (450 degrees C), reaching almost 14%. The results of product solid characterization reveal that the carbon, hydrogen and nitrogen content decreases with increasing pyrolysis temperature. Furthermore, both the ash and the volatile content are related to the pyrolysis temperature. The ash content is higher when the pyrolysis temperature is higher, while when the temperature increases, a solid product with lower volatile content is obtained. In respect to specific surface area, a higher pyrolysis temperature improves the properties of the solid product as an adsorbent. The adsorption capacity increases as the pyrolysis temperature increases, with the highest value of 7.91 mg/g for the solid obtained in the pyrolysis at 550 degrees C. In addition, adsorption capacity increases as the initial concentration of lead rises, reaching a maximum value close to 26 mg/g for an initial concentration of 40 mg/L. The Sips model is the one that best reproduces the experimental results of the adsorption process equilibrium study.

Automated summary

In this study, the pyrolysis of post-consumer mixed plastic waste was conducted to produce solid products used as adsorbents for lead in aqueous media. The results show that pyrolysis temperature affects the yield and properties of the solid product, with higher temperatures leading to lower carbon, hydrogen, and nitrogen content. Higher pyrolysis temperatures also result in increased adsorption capacity, with the solid obtained at 550 degrees C showing the highest value at 7.91 mg/g. Additionally, the Sips model best reproduces the experimental results of the adsorption process equilibrium study.