Design principles for a single-process 3d-printed accelerometer – theory and experiment

Higher-order resistivity-strain relations for self-sensing nanocomposites subject to general deformations

(2020) G.M. Koo et al.   COMPOSITES PART B-ENGINEERING

Fused Filament Fabrication of Piezoresistive Carbon Nanotubes Nanocomposites for Strain Monitoring

(2020) Sithiprumnea Dul et al.   Frontiers in Materials

Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses

(2020) Tianyun Yao et al.   COMPOSITES PART B-ENGINEERING

Design and Development of a Fully Printed Accelerometer with a Carbon Paste-Based Strain Gauge

(2020) Mingjie Liu et al.   SENSORS

Process Parameters for FFF 3D-Printed Conductors for Applications in Sensors

(2020) Tibor Barši Palmić et al.   SENSORS

3D PRINTING TO INTEGRATE ACTUATORS INTO COMPOSITES

(2020) Sampada Bodkhe et al.   Additive Manufacturing

Multi-materials fused filament printing with embedded highly conductive suspended structures for compressive sensing

(2020) J.C. Tan et al.   Additive Manufacturing

A 3D−printed stretchable strain sensor for wind sensing

(2019) Mohammed Khalid Al-Rubaiai et al.   Smart Materials and Structures

Dynamic Measurements Using FDM 3D-Printed Embedded Strain Sensors

(2019) Marco Maurizi et al.   SENSORS

3D printing of carbon nanotubes reinforced thermoplastic polyimide composites with controllable mechanical and electrical performance

(2019) Wenli Ye et al.   COMPOSITES SCIENCE AND TECHNOLOGY

The First 3D-Printed and Wet-Metallized Three-Axis Accelerometer With Differential Capacitive Sensing

(2019) Valentina Zega et al.   IEEE SENSORS JOURNAL

A new sensor inspired by the lateral-line system of fish using the self-powered d33 mode piezoelectric diaphragm for hydrodynamic sensing

(2019) Xingxu Zhang et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Piezoresistive Behaviour of Additively Manufactured Multi-Walled Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

(2019) Myoungsuk Kim et al.   Materials

Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analyses

(2019) Yu Zhao et al.   MATERIALS & DESIGN

Additive manufacturing and characterization of a load cell with embedded strain gauges

(2019) Gianni Stano et al.   PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

Uncertainties in the attenuation performance of a multi-frequency metastructure from additive manufacturing

(2019) Adriano T. Fabro et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

The First 3-D-Printed z-Axis Accelerometers With Differential Capacitive Sensing

(2018) Valentina Zega et al.   IEEE SENSORS JOURNAL

Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester

(2018) Abdullah Nammari et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Theory, Technology and Applications of Piezoresistive Sensors: a Review

(2018) A.S. Fiorillo et al.   SENSORS AND ACTUATORS A-PHYSICAL

Characterization of the spatial elastoresistivity of inkjet-printed carbon nanotube thin films

(2018) Yingjun Zhao et al.   Smart Materials and Structures

Strain sensing behaviour of 3D printed carbon black filled ABS

(2018) Michael Dawoud et al.   Journal of Manufacturing Processes

A novel additive manufactured three-dimensional piezoelectric transducer: Systematic modeling and experimental validation

(2018) Liang Wang et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

(2018) Josef Christ et al.   Polymers

Harnessing the bilinear nonlinearity of a 3D printed biomimetic diaphragm for acoustic sensor applications

(2018) Jong-Yun Yoon et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments

(2017) Kyuyoung Kim et al.   SENSORS AND ACTUATORS A-PHYSICAL

Electrically conductive nanocomposites for fused deposition modelling

(2017) A. Dorigato et al.   SYNTHETIC METALS

3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites

(2017) Josef F. Christ et al.   MATERIALS & DESIGN

A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation

(2016) C. Claeys et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory

(2016) Caterina Casavola et al.   MATERIALS & DESIGN

Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts

(2015) Miquel Domingo-Espin et al.   MATERIALS & DESIGN

3D Printing for the Rapid Prototyping of Structural Electronics

(2014) Eric Macdonald et al.   IEEE Access

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

(2012) Simon J. Leigh et al.   PLoS One