4.4 Article

Gasoline Compression Ignition on a Light-Duty Multi-Cylinder Engine Using a Wide Range of Fuel Reactivities and Heavy Fuel Stratification

Publisher

ASME
DOI: 10.1115/1.4050742

Keywords

gasoline emissions fuel stratification combustion

Categories

Funding

  1. US Department of Energy (DOE) [DE-AC05-00OR22725]
  2. DOE Public Access Plan
  3. DOE Office of Energy Efficiency and Renewable Energy (EERE)
  4. Vehicle Technologies Office
  5. DOE-EERE User Facility at Oak Ridge National Laboratory

Ask authors/readers for more resources

The study focuses on using gasoline in modern compression ignition engines to reduce emissions and improve efficiency. It discusses the challenges and benefits of different gasoline compression ignition (GCI) injection strategies, such as partial fuel stratification (PFS) and heavy fuel stratification (HFS), in achieving low-temperature combustion (LTC) while controlling combustion timing. The research shows that gasoline fuels can achieve LTC operation with ultra-low NOx and soot emissions, compared to conventional diesel combustion (CDC) which cannot achieve both simultaneously.
Many research studies have focused on utilizing gasoline in modern compression ignition engines to reduce emissions and improve efficiency. Collectively, this combustion mode has become kn+own as gasoline compression ignition (GCI). One of the biggest challenges with GCI operation is maintaining control over the combustion process through the fuel injection strategy, such that the engine can be controlled on a cycle-by-cycle basis. Research studies have investigated a wide variety of GCI injection strategies (i.e., fuel stratification levels) to maintain control over the heat release rate while achieving low-temperature combustion (LTC). This work shows that at loads relevant to light-duty engines, partial fuel stratification (PFS) with gasoline provides very little controllability over the timing of combustion. On the contrary, heavy fuel stratification (HFS) provides very linear and pronounced control over the timing of combustion. However, the HFS strategy has challenges achieving LTC operation due to the air handling burdens associated with the high exhaust gas recirculation (EGR) rates that are required to reduce NOx emissions to near zero levels. In this work, a wide variety of gasoline fuel reactivities (octane numbers ranging from <40 to 87) were investigated to understand the engine performance and emissions of HFS-GCI operation on a multi-cylinder light-duty engine. The results indicate that over an EGR sweep at 4 bar brake mean effective pressure (BMEP), the gasoline fuels can achieve LTC operation with ultra-low NOx and soot emissions, while conventional diesel combustion (CDC) is unable to simultaneously achieve low NOx and soot. At 10 bar BMEP, all the gasoline fuels were compared to diesel, but using mixing controlled combustion and not LTC.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available