Selective laser melting of Ti-TiN composites: Formation mechanism and corrosion behaviour in H2SO4/HCl mixed solution

Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests

(2020) Lai-Chang Zhang et al.   ADVANCED ENGINEERING MATERIALS

Anisotropic corrosion resistance of TiC reinforced Ni-based composite fabricated by selective laser melting

(2019) Hongmei Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

AEO7 Surfactant as an Eco-Friendly Corrosion Inhibitor for Carbon Steel in HCl solution

(2019) Mostafa H. Sliem et al.   Scientific Reports

Influence of Particle Size on Laser Absorption and Scanning Track Formation Mechanisms of Pure Tungsten Powder during Selective Laser Melting

(2019) Jiayao Zhang et al.   Engineering

Mechanical and corrosion behavior of titanium alloys additively manufactured by selective laser melting – A comparison between nearly β titanium, α titanium and α + β titanium

(2019) Libo Zhou et al.   OPTICS AND LASER TECHNOLOGY

Corrosion behavior of metastable AISI 321 austenitic stainless steel: Investigating the effect of grain size and prior plastic deformation on its degradation pattern in saline media

(2019) A. A. Tiamiyu et al.   Scientific Reports

Enhanced corrosion resistance of Ti-5 wt.% TiN composite compared to commercial pure Ti produced by selective laser melting in HCl solution

(2019) Shengfeng Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer’s solution for bio-implant application

(2018) Sivakumar Bose et al.   APPLIED SURFACE SCIENCE

Electrochemical corrosion characteristics and biocompatibility of nanostructured titanium for implants

(2018) Jinwen Lu et al.   APPLIED SURFACE SCIENCE

Nanoindentation studies on TiN nanoceramic reinforced Ti–6Al–4V matrix composite

(2018) Mosima Edith Maja et al.   CERAMICS INTERNATIONAL

In situ monitoring of the localized corrosion of 304 stainless steel in FeCl 3 solution using a joint electrochemical noise and scanning reference electrode technique

(2018) Cheng Wang et al.   ELECTROCHEMISTRY COMMUNICATIONS

Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods

(2018) Bandar AlMangour et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of fluoride on the corrosion behavior of nanostructured Ti-24Nb-4Zr-8Sn alloy in acidulated artificial saliva

(2018) Ji Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and properties of in-situ TiN reinforced laser cladding CoCr 2 FeNiTi x high-entropy alloy composite coatings

(2018) Yaxiong Guo et al.   SURFACE & COATINGS TECHNOLOGY

Effect of induction remelting on the microstructure and properties of in situ TiN-reinforced NiCrBSi composite coatings

(2018) Jingbai Chen et al.   SURFACE & COATINGS TECHNOLOGY

Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN

(2018) Oluwasegun Eso FALODUN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructures and mechanical properties of in situ TiC–β–Ti–Nb composites with ultrafine grains fabricated by high-pressure sintering

(2018) Z. Liu et al.   Scientific Reports

Phase-field model of pitting corrosion kinetics in metallic materials

(2018) Talha Qasim Ansari et al.   npj Computational Materials

Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications

(2018) Arash Ataee et al.   ACTA MATERIALIA

Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting

(2018) Xin Gai et al.   CORROSION SCIENCE

Oxidation resistance of spark plasma sintered Ti6Al4V-TiN composites

(2018) F.M. Kgoete et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fragmentation and refinement behavior and underlying thermodynamic mechanism of WC reinforcement during selective laser melting of Ni-based composites

(2018) Mujian Xia et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys

(2017) Hui Feng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)

(2017) Bartłomiej Wysocki et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Corrosion behaviors of TiNi/Ti2Ni matrix coatings in the environment rich in Cl ions

(2017) L.F. Hu et al.   SURFACE & COATINGS TECHNOLOGY

Green Brönsted acid ionic liquids as novel corrosion inhibitors for carbon steel in acidic medium

(2017) Shuyun Cao et al.   Scientific Reports

Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution

(2016) Nianwei Dai et al.   CORROSION SCIENCE

Laser processing of in situ TiN/Ti composite coating on titanium

(2016) Himanshu Sahasrabudhe et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructure and mechanical properties of TC4 alloy modified and reinforced by TiB+TiN/Ti inoculants ribbons

(2016) Long Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of passive potential on the electronic property of the passive film formed on Ti in 0.1M HCl solution during ultrasonic cavitation

(2016) D.G. Li et al.   ULTRASONICS SONOCHEMISTRY

Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review 

(2015) Lai-Chang Zhang et al.   ADVANCED ENGINEERING MATERIALS

Electrochemical and XPS studies of a Nb-containing Ti-based glass-forming alloy system in H 2 SO 4 solution

(2015) Xiang Cheng et al.   ELECTROCHEMISTRY COMMUNICATIONS

Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments

(2015) Pengpeng Yuan et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Electrochemical and surface analyses of nanostructured Ti–24Nb–4Zr–8Sn alloys in simulated body solution

(2014) J. Li et al.   Acta Biomaterialia

Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties

(2014) Hooyar Attar et al.   ACTA MATERIALIA

Manufacture by selective laser melting and mechanical behavior of commercially pure titanium

(2013) H. Attar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media

(2010) Ishtiaque Ahamad et al.   CORROSION SCIENCE

Microstructure and mechanical properties of TiC/Ti–6Al–4V composites processed byin situcasting route

(2010) Z J Wei et al.   MATERIALS SCIENCE AND TECHNOLOGY

Laser processing of SiC-particle-reinforced coating on titanium

(2010) Mitun Das et al.   SCRIPTA MATERIALIA

Corrosion behaviour of laser gas nitrided Ti–6Al–4V in HCl solution

(2009) R.Sh. Razavi et al.   CORROSION SCIENCE

Production of titanium matrix composites reinforced with SiC particles

(2008) C POLETTI et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Corrosion behavior of Ti–13Nb–13Zr alloy used as a biomaterial

(2008) T.C. Niemeyer et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dissolution phenomena in the Ti(C0.7N0.3)–WC–Ni system

(2007) S. Ahn et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS