Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance

An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells

(2020) Yan-Di Luo et al.   CHEMICAL ENGINEERING JOURNAL

Fabrication of Sb2S3 thin films by magnetron sputtering and post-sulfurization/selenization for substrate structured solar cells

(2020) Jingting Luo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructural investigation of inkjet printed Cu(In,Ga)Se2 thin film solar cell with improved efficiency

(2020) Brijesh Singh Yadav et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Incorporation of metal selenide thin films as the secondary absorber in the CdTe solar cells

(2020) Taowen Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV

(2020) Guang-Xing Liang et al.   Nano Energy

BiBr3 as an additive in CsPbBr3 for carbon-based all-inorganic perovskite solar cell

(2020) Yue Pei et al.   JOURNAL OF ALLOYS AND COMPOUNDS

9.2%-efficient core-shell structured antimony selenide nanorod array solar cells

(2019) Zhiqiang Li et al.   Nature Communications

Current Enhancement via a TiO2 Window Layer for CSS Sb2Se3 Solar Cells: Performance Limits and High Voc

(2019) Laurie J. Phillips et al.   IEEE Journal of Photovoltaics

SnO2-catalyzed oxidation in high efficiency CdTe solar cells

(2019) Craig L Perkins et al.   ACS Applied Materials & Interfaces

Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation

(2019) Liping Guo et al.   APL Materials

Quasiepitaxy Strategy for Efficient Full‐Inorganic Sb 2 S 3 Solar Cells

(2019) Hui Deng et al.   ADVANCED FUNCTIONAL MATERIALS

Planar perovskite solar cells with long-term stability using ionic liquid additives

(2019) Sai Bai et al.   NATURE

Orientation Engineering in Low‐Dimensional Crystal‐Structural Materials via Seed Screening

(2019) Kanghua Li et al.   ADVANCED MATERIALS

A review on binary metal sulfide heterojunction solar cells

(2019) Dong Gwon Moon et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Growth mechanism of Sb2Se3 thin films for photovoltaic application by vapor transport deposition

(2019) Rokas Kondrotas et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Local mechanical and electrical behavior in CdTe thin film solar cells revealed by scanning probe microscopy

(2019) Melissa Mathews et al.   AIP Advances

High-quality NiO thin film by low-temperature spray combustion method for perovskite solar cells

(2019) Yongshan Qin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film

(2019) Rong Tang et al.   Nano Energy

Mechanically-stacked perovskite/CIGS tandem solar cells with efficiency of 23.9% and reduced oxygen sensitivity

(2018) Heping Shen et al.   Energy & Environmental Science

Thermally induced structural evolution and performance of Sb 2 Se 3 films and nanorods prepared by an easy sputtering method

(2018) Guang-Xing Liang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Stable and efficient CdS/Sb 2 Se 3 solar cells prepared by scalable close space sublimation

(2018) Deng-Bing Li et al.   Nano Energy

Band gap temperature-dependence of close-space sublimation grown Sb2Se3 by photo-reflectance

(2018) Max Birkett et al.   APL Materials

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

(2018) Nam Joong Jeon et al.   Nature Energy

Improved efficiency of Sb2Se3/CdS thin-film solar cells: The effect of low-temperature pre-annealing of the absorbers

(2018) Dajeong Lee et al.   SOLAR ENERGY

Improving the efficiency of Sb2Se3 thin-film solar cells by post annealing treatment in vacuum condition

(2018) Xiaobo Hu et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

6.6% efficient antimony selenide solar cells using grain structure control and an organic contact layer

(2018) Oliver S. Hutter et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Vacuum assisted solution processing for highly efficient Sb2S3 solar cells

(2018) Rongfeng Tang et al.   Journal of Materials Chemistry A

Improvement in Sb2Se3 Solar Cell Efficiency through Band Alignment Engineering at the Buffer/Absorber Interface

(2018) Gang Li et al.   ACS Applied Materials & Interfaces

Interfacial engineering for high efficiency solution processed Sb2Se3 solar cells

(2018) Xiaomin Wang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Sb 2 Se 3 thin film solar cells in substrate configuration and the back contact selenization

(2017) Zhiqiang Li et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer

(2017) Liang Wang et al.   Nature Energy

Rapid thermal process to fabricate Sb 2 Se 3 thin film for solar cell application

(2016) Chenchen Yuan et al.   SOLAR ENERGY

Non-uniform distribution in µc-Si1−xGex:H and its influence on thin film and device performance

(2016) Yu Cao et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries

(2015) Ying Zhou et al.   Nature Photonics

Vibrational properties and bonding nature of Sb2Se3 and their implications for chalcogenide materials

(2015) Volker L. Deringer et al.   Chemical Science

Thermal properties and the structure of amorphous Sb2Se3 thin film

(2014) E. Černošková et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Hybrid influences of defect dipole and intrinsic inducing field on orientation of PbTiO3 thin film deposited on Indium Tin Oxide/glass substrate

(2011) Zan Zheng et al.   THIN SOLID FILMS