Toward Development of Strong and Formable Magnesium Alloy Sheets with Bake-Hardenability

Achieving High Ductility in Hot-Rolled Mg-xZn-0.2Ca-0.2Ce Sheet by Zn Addition

(2020) Guangang Wang et al.   JOM

A room temperature formable magnesium–silver–calcium sheet alloy with high ductility

(2020) Mingzhe Bian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review on thermal conductivity of magnesium and its alloys

(2020) Shubo Li et al.   Journal of Magnesium and Alloys

Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy

(2020) Qinghang Wang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

High strength and excellent ductility of dilute Mg-0.68Al-0.32Ca-0.50Mn (wt%) extrusion alloy obtained by T6 treatment

(2020) Xiaoqing Liu et al.   MATERIALS CHARACTERIZATION

New Mg–Al based alloy sheet with good room-temperature stretch formability and tensile properties

(2020) T. Nakata et al.   SCRIPTA MATERIALIA

Simultaneous achievement of high thermal conductivity, high strength and formability in Mg-Zn-Ca-Zr sheet alloy

(2020) Z. H. Li et al.   Materials Research Letters

Microstructure and mechanical properties of Mg-4Zn-xGd (x=0, 0.5, 1, 2) alloys

(2020) Cui-ju Wang et al.   Journal of Magnesium and Alloys

Relationship between Deep Drawability and Microstructure of Magnesium Alloy

(2020) Yosuke Tamura et al.   MATERIALS TRANSACTIONS

A new magnesium sheet alloy with high tensile properties and room-temperature formability

(2020) Renhai Shi et al.   Scientific Reports

A combined experimental and numerical study on room temperature formable magnesium–silver–calcium alloys

(2020) Mingzhe Bian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improvement of mechanical properties of hot extruded and age treated Mg–Zn–Mn–Ca alloy through Sn addition

(2020) Xia Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Role of Zn on the room temperature formability and strength in Mg–Al–Ca–Mn sheet alloys

(2020) Z.H. Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improving room-temperature stretch formability of a high-alloyed Mg–Al–Ca–Mn alloy sheet by a high-temperature solution-treatment

(2020) T. Nakata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Modification of Microstructure and Texture in Highly Non-Flammable Mg-Al-Zn-Y-Ca Alloy Sheets by Controlled Thermomechanical Processes

(2019) Sangbong Yi et al.   Metals

Effects of alloying addition and twin-roll casting process on Mg–2Zn based-alloys with high strength and high formability

(2019) Yun Zhang et al.   Materials Research Express

Compositional optimization of Mg–Zn–Sc sheet alloys for enhanced room temperature stretch formability

(2019) Mingzhe Bian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improving tensile properties of a room-temperature formable and heat-treatable Mg–6Zn-0.2Ca (wt.%) alloy sheet via micro-alloying of Al and Mn

(2019) T. Nakata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improving tensile properties of Mg-Sn-Zn magnesium alloy sheets using pre-tension and ageing treatment

(2018) Tong Hu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Heat-treatable Mg-9Al-6Sn-3Zn extrusion alloy

(2018) Chaoqiang Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Development of high mechanical properties and moderate thermal conductivity cast Mg alloy with multiple RE via heat treatment

(2018) Guoqiang Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Improving mechanical properties and yield asymmetry in high-speed extrudable Mg-1.1Al-0.24Ca (wt%) alloy by high Mn addition

(2018) T. Nakata et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of rolling conditions on the microstructure and mechanical properties in a Mg–Al–Ca–Mn–Zn alloy sheet

(2018) M.Z. Bian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Role of one direction strong texture in stretch formability for ZK60 magnesium alloy sheet

(2018) Wenke Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Designing a magnesium alloy with high strength and high formability

(2018) T. T. T. Trang et al.   Nature Communications

Rational design of a lean magnesium-based alloy with high age-hardening response

(2018) M. Cihova et al.   ACTA MATERIALIA

The effect of multiple precipitate types and texture on yield asymmetry in Mg-Sn-Zn(-Al-Na-Ca) alloys

(2018) A.E. Davis et al.   ACTA MATERIALIA

Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting

(2018) M.Z. Bian et al.   ACTA MATERIALIA

Origin of texture weakening in a rolled ZEX4101 alloy sheet and its effect on room temperature formability and tensile property

(2018) T. Nakata et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Deformation behaviors of twin roll cast Mg-Zn-X-Ca alloys for enhanced room-temperature formability

(2017) Sang Jun Park et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fuel consumption and CO 2 emissions from passenger cars in Europe – Laboratory versus real-world emissions

(2017) Georgios Fontaras et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Towards magnesium alloys for high-volume automotive applications

(2017) William J. Joost et al.   SCRIPTA MATERIALIA

A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability

(2017) M.Z. Bian et al.   SCRIPTA MATERIALIA

Effects of extrusion and Ag, Zn addition on the age-hardening response and microstructure of a Mg-7Sn alloy

(2016) Xuefei Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deep drawing of ZK60 magnesium sheets fabricated using ingot and twin-roll casting methods

(2016) Jae-Hyung Cho et al.   MATERIALS & DESIGN

Strong and ductile heat-treatable Mg–Sn–Zn–Al wrought alloys

(2015) T.T. Sasaki et al.   ACTA MATERIALIA

Texture and stretch formability of AZ61 and AM60 magnesium alloy sheets processed by high-temperature rolling

(2015) Xinsheng Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy

(2015) Shilun Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of the final rolling speeds on the stretch formability of AZ31 alloy sheet rolled at a high temperature

(2015) Tao Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of aluminum content on the texture and sheet formability of AM series magnesium alloys

(2015) Xinsheng Huang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhanced Room-Temperature Stretch Formability of Mg–0.2 mass%Ce Alloy Sheets Processed by Combination of High-Temperature Pre-Annealing and Warm Rolling

(2015) Kazutaka Suzuki et al.   MATERIALS TRANSACTIONS

High-speed extrusion of heat-treatable Mg–Al–Ca–Mn dilute alloy

(2015) T. Nakata et al.   SCRIPTA MATERIALIA

High strength and formable Mg–6.2Zn–0.5Zr–0.2Ca alloy sheet processed by twin roll casting

(2014) T. Bhattacharjee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improved mechanical properties of Mg–7.6Al–0.4Zn alloy through aging prior to extrusion

(2014) Jae-Gil Jung et al.   SCRIPTA MATERIALIA

Recent development in aluminium for automotive applications

(2014) Jürgen HIRSCH   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Thermal characteristics of Mg–Zn–Mn alloys with high specific strength and high thermal conductivity

(2013) Jiawei Yuan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of extrusion conditions on microstructure and mechanical properties of microalloyed Mg–Sn–Al–Zn alloys

(2013) F.R. Elsayed et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of Ag and Ca additions on the age hardening response of Mg–Zn alloys

(2013) T. Bhattacharjee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High conductivity and high strength Mg–Zn–Cu alloy

(2013) H. Pan et al.   MATERIALS SCIENCE AND TECHNOLOGY

Enhancement of Room Temperature Stretch Formability of Mg–1.5 mass%Mn Alloy by Texture Control

(2013) Kazutaka Suzuki et al.   MATERIALS TRANSACTIONS

Texture Evolution in Mg-Zn-Ca Alloy Sheets

(2013) D.-W. Kim et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Significant enhancement of the age-hardening response in Mg–10Sn–3Al–1Zn alloy by Na microalloying

(2013) F.R. Elsayed et al.   SCRIPTA MATERIALIA

Influence of rolling temperature on static recrystallization behavior of AZ31 magnesium alloy

(2012) Xinsheng Huang et al.   JOURNAL OF MATERIALS SCIENCE

Microstructures and mechanical properties of extruded and heat treated Mg–6Zn–1Si–0.5Mn alloys

(2012) C.L. Mendis et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals

(2011) Adrien Chapuis et al.   ACTA MATERIALIA

Twinning, dynamic recovery and recrystallization in the hot rolling process of twin-roll cast AZ31B alloy

(2011) Zhen Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass

(2011) Xinsheng Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Zinc Concentration on the Stretch Formability at Room Temperature of the Rolled Mg-Zn-Ca Alloys

(2011) Yasumasa Chino et al.   JOURNAL OF THE JAPAN INSTITUTE OF METALS

Microstructure and mechanical properties of twin roll cast AM31 magnesium alloy sheet processed by differential speed rolling

(2011) L.L. Chang et al.   MATERIALS & DESIGN

Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys

(2011) Yasumasa Chino et al.   MATERIALS TRANSACTIONS

The Impact of Melt-Conditioned Twin-Roll Casting on the Downstream Processing of an AZ31 Magnesium Alloy

(2011) I. Bayandorian et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Low-temperature superplasticity of extruded Mg–Sn–Al–Zn alloy

(2011) S.S. Park et al.   SCRIPTA MATERIALIA

Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets

(2010) D. Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of Mg–Al–Mn–Ca alloy sheet produced by twin roll casting and sequential warm rolling

(2010) Yinong Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy

(2010) Yasumasa Chino et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and texture studies on twin-roll cast AZ31 (Mg–3wt.%Al–1wt.%Zn) alloy and the effect of thermomechanical processing

(2010) M. Masoumi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancement of Stretch Formability at Room Temperature by Addition of Ca in Mg-Zn Alloy

(2010) Yasumasa Chino et al.   MATERIALS TRANSACTIONS

Alleviation of basal texture in twin-roll cast Mg–3Al–1Zn alloy

(2010) M. Masoumi et al.   SCRIPTA MATERIALIA

Influences of initial texture on microstructure and stretch formability of Mg–3Al–1Zn alloy sheet obtained by a combination of high temperature and subsequent warm rolling

(2010) Xinsheng Huang et al.   SCRIPTA MATERIALIA

Enhanced precipitation hardening of Mg–Ca alloy by Al addition

(2010) J. Jayaraj et al.   SCRIPTA MATERIALIA

Microstructures and tensile properties of a twin roll cast and heat-treated Mg–2.4Zn–0.1Ag–0.1Ca–0.1Zr alloy

(2010) C.L. Mendis et al.   SCRIPTA MATERIALIA

Production of 150 cm wide AZ31 magnesium sheet by twin roll casting

(2010) A.A. KAYA et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets

(2009) Sangbong Yi et al.   ACTA MATERIALIA

Thermal properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy

(2009) C.J. Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Age-hardening response of Mg–0.3at.%Ca alloys with different Zn contents

(2009) K. Oh-ishi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Texture and stretch formability of a rolled Mg–Zn alloy containing dilute content of Y

(2009) Yasumasa Chino et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of aging treatment on fatigue behaviour in extruded AZ61 and AZ80 magnesium alloys

(2009) Y. Uematsu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Ca addition on microstructure of twin-roll cast AZ31 Mg alloy

(2009) Geun Tae Bae et al.   METALS AND MATERIALS INTERNATIONAL

Superplastic deformation behavior of twin-roll cast Mg–6Zn–1Mn–1Al alloy

(2009) S.S. Park et al.   SCRIPTA MATERIALIA

Enhancement of stretch formability of Mg–3Al–1Zn alloy sheet using hot rolling at high temperatures up to 823K and subsequent warm rolling

(2009) Xinsheng Huang et al.   SCRIPTA MATERIALIA

Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature

(2009) D.H. Kang et al.   SCRIPTA MATERIALIA

Heat-treatable Mg–Sn–Zn wrought alloy

(2009) T.T. Sasaki et al.   SCRIPTA MATERIALIA

Microstructure and texture evolution of Mg alloys during twin-roll casting and subsequent hot rolling

(2009) Kyung-Hun Kim et al.   SCRIPTA MATERIALIA

Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy

(2008) C MENDIS et al.   ACTA MATERIALIA

Microstructure and mechanical properties of Mg–4.5Al–1.0Zn alloy sheets produced by twin roll casting and sequential warm rolling

(2008) Hongmei Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of pre-aging and Al addition on age-hardening and microstructure in Mg-6wt% Zn alloys

(2008) K. Oh-ishi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce

(2008) Yasumasa Chino et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Extremely fine and uniform microstructure of magnesium AZ91D alloy sheets produced by melt conditioned twin roll casting

(2008) Zan Bian et al.   MATERIALS SCIENCE AND TECHNOLOGY

Tensile Properties and Stretch Formability of Mg-1.5 mass%-0.2 mass%Ce Sheet Rolled at 723 K

(2008) Yasumasa Chino et al.   MATERIALS TRANSACTIONS

A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature

(2008) T.T. Sasaki et al.   SCRIPTA MATERIALIA

The recrystallization and texture of magnesium–zinc–cerium alloys

(2008) L MACKENZIE et al.   SCRIPTA MATERIALIA

Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793K

(2008) Xinsheng Huang et al.   SCRIPTA MATERIALIA

Enhanced stretch formability of Mg–Al–Zn alloy sheets rolled at high temperature (723K)

(2008) Y CHINO et al.   SCRIPTA MATERIALIA

Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy

(2007) Hanlin Ding et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of ZK60–Yb magnesium alloys

(2007) Wenbin Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING