Binary MnO2/Co3O4 Metal Oxides Wrapped on Superaligned Electrospun Carbon Nanofibers as Binder Free Supercapacitor Electrodes

Increasing the performance of energy storage systems using different metal oxides and carbon nanomaterial as support scaffolds in electrode manufacture is of great importance. However, deposition of active material using binders or conductive agents results in reduced effective contact areas in the electrodes and between the electrolytes, lowering the energy storage capacity. In this work, a homogeneous and stable low current electrodeposition of binary metal oxides MnO2/Co3O4 on superaligned electrospun carbon nanofibers (SA-ECNFs) greatly overcomes these short-comings. The morphology tests revealed that the manganese oxide (MnO2) and cobalt oxide (Co3O4) were uniformly wrapped around the carbon nanofibers to form a porous morphology, rendering high energy storage capacity from both the pseudocapacitance and electrochemical double layer (ECDL). Electrochemical tests indicated that the as-prepared MnO2/Co3O4@SA-ECNFs electrode displays a specific capacitance of 728 F g(-1) in 6 M KOH electrolyte in CV vs 622 F g(-1) of MnO2@SA-ECNFs electrode at 5 mV s(-1). The performance of galvanic charge-discharge (GCD) at 2 A g(-1) of the electrode demonstrated 64.5 Wh kg(-1) for energy density and 1276 W kg(-1) for power density and a capacity retention of 71.8% over 11 000 cycles.

Automated summary

The study focused on enhancing energy storage capacity by depositing binary metal oxides MnO2/Co3O4 on superaligned electrospun carbon nanofibers. The electrode displayed high specific capacitance, energy density, power density, and maintained 71.8% capacity retention over 11,000 cycles.