Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

(2020) Yonggang Tong et al.   CERAMICS INTERNATIONAL

Reactive melt in\filtration of carbon fibre reinforced ZrB2/B composites with Zr2Cu

(2020) Antonio Vinci et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Development of UHTCMCs via water based ZrB2 powder slurry infiltration and polymer infiltration and pyrolysis

(2020) Francesca Servadei et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Ablation of C/SiC–HfC composite prepared by precursor infiltration and pyrolysis in plasma wind tunnel

(2020) Liuyang Duan et al.   Journal of Advanced Ceramics

Effect of ZrC particle distribution on the ablation resistance of C/C-SiC-ZrC composites fabricated using precursor infiltration pyrolysis

(2020) Xiaowei Wu et al.   CERAMICS INTERNATIONAL

Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C

(2020) Bo-Wen Chen et al.   CORROSION SCIENCE

Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review

(2019) Yutaro Arai et al.   CERAMICS INTERNATIONAL

Microstructures and mechanical properties of Cf/ZrB2-SiC composite fabricated by nano slurry brushing combined with low-temperature hot pressing

(2019) Dongyang Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Ablation behavior of Cf/ZrC-SiC-based composites fabricated by an improved reactive melt infiltration

(2019) Bo-Wen Chen et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing

(2019) Dongyang Zhang et al.   CORROSION SCIENCE

Mechanical, oxidation and ablation properties of C/(C-SiC)CVI-(ZrC-SiC)PIP composites

(2019) Jinjin Yao et al.   CORROSION SCIENCE

Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs?

(2019) Luca Zoli et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Ultra-high-temperature ablation behavior of SiC–ZrC–TiC modified carbon/carbon composites fabricated via reactive melt infiltration

(2019) Yi Zeng et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Improved microstructure and high temperature mechanical properties of C/C–SiC composites by introduction of ZrC nanoparticles

(2019) J.J. Sha et al.   CERAMICS INTERNATIONAL

Ablation behavior of C/C-ZrC and C/SiC-ZrC composites fabricated by a joint process of slurry impregnation and chemical vapor infiltration

(2018) Haijun Zhou et al.   CERAMICS INTERNATIONAL

Fabrication and properties of 3-dimensional 4-directional C f /HfC-SiC composites by precursor impregnation and pyrolysis process

(2018) Chunlei Yan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Architectural engineering inspired method of preparing Cf /ZrC-SiC with graceful mechanical responses

(2018) Ping Hu et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

(2018) Dongyang Zhang et al.   CERAMICS INTERNATIONAL

Materials characterisation and mechanical properties of Cf-UHTC powder composites

(2018) V. Rubio et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Oxidation protection of C/C composites: Coating development with thermally stabile SiC@PyC nanowires and an interlocking TaB2-SiC structure

(2018) Lei Zhuang et al.   CORROSION SCIENCE

The corrosion behavior of CVI SiC matrix in SiC f /SiC composites under molten fluoride salt environment

(2017) Hongda Wang et al.   JOURNAL OF NUCLEAR MATERIALS

Growth modes for monoclinic yttria-stabilized zirconia during the martensitic transformation

(2017) Yongzhe Wang et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

(2017) Yi Zeng et al.   Nature Communications

Efficacy of a ZrB 2 –SiC matrix in protecting C fibres from oxidation in novel UHTCMC materials

(2017) L. Zoli et al.   MATERIALS & DESIGN

Effect of heat treatment on the mechanical properties of SiC f /BN/SiC fabricated by CVI

(2016) Xiaokang Ma et al.   CERAMICS INTERNATIONAL

Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis

(2015) Liang Xue et al.   CORROSION SCIENCE

Ablation behavior and mechanism of C/ZrC, C/ZrC–SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process

(2014) Chunlei Yan et al.   CORROSION SCIENCE

Effects of high-temperature annealing on the microstructure and properties of C/SiC–ZrB2 composites

(2013) Si’an Chen et al.   MATERIALS & DESIGN

Microstructures and mechanical properties of 3D 4-directional, Cf/ZrC–SiC composites using ZrC precursor and polycarbosilane

(2013) Qinggang Li et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites

(2008) Sufang Tang et al.   CORROSION SCIENCE