Microstructural characteristics and mechanical behavior of SiC(CNT)/Al multiphase interfacial micro-zones via molecular dynamics simulations
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Microstructural characteristics and mechanical behavior of SiC(CNT)/Al multiphase interfacial micro-zones via molecular dynamics simulations
Authors
Keywords
SiC(CNT)/Al multiphase interfacial micro-zone, Molecular dynamics, Interfacial characteristics, Mechanical deformation, Failure behavior
Journal
COMPOSITES PART B-ENGINEERING
Volume -, Issue -, Pages 108996
Publisher
Elsevier BV
Online
2021-05-19
DOI
10.1016/j.compositesb.2021.108996
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Gradient design of bio-inspired nacre-like composites for improved impact resistance
- (2021) Zhiquan Wei et al. COMPOSITES PART B-ENGINEERING
- Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design
- (2021) Liang Liu et al. COMPOSITES PART B-ENGINEERING
- Bioinspired multiscale Al2O3-rGO/Al laminated composites with superior mechanical properties
- (2021) Zhiming Zhang et al. COMPOSITES PART B-ENGINEERING
- Mechanical properties of CNT-reinforced Ni3Al composites: the role of chirality, temperature, and volume fraction
- (2020) Zhaowei Wang et al. JOURNAL OF PHYSICS-CONDENSED MATTER
- Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system
- (2020) YanWei Liu et al. Science China-Physics Mechanics & Astronomy
- CNT-reinforced iron and titanium nanocomposites: Strength and deformation mechanisms
- (2020) Bruno Faria et al. COMPOSITES PART B-ENGINEERING
- First-principles investigation of interfacial stability, mechanical behavior and failure mechanism of β-SiC(1 1 1)/Al(1 1 1) interfaces
- (2020) Caihao Qiu et al. COMPUTATIONAL MATERIALS SCIENCE
- Development of magnesium-based hybrid metal matrix composite through in situ micro, nano reinforcements
- (2020) Harprabhjot Singh et al. JOURNAL OF COMPOSITE MATERIALS
- Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates
- (2020) Xuezheng Zhang et al. COMPOSITES PART B-ENGINEERING
- A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
- (2019) Arunachalam Ramanathan et al. Journal of Manufacturing Processes
- The structural rearrangement with secondary reinforcement in graphene/nanotwinned copper nanocomposites: A molecular dynamics study
- (2019) Che Zhang et al. COMPOSITES PART B-ENGINEERING
- Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure
- (2019) Y.N. Zan et al. COMPOSITES PART B-ENGINEERING
- Microstructure, microhardness and thermal expansion of CNT/Al composites prepared by flake powder metallurgy
- (2018) Pham Van Trinh et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Strength and failure mechanisms of cnt-reinforced copper nanocomposite
- (2018) Bruno Faria et al. COMPOSITES PART B-ENGINEERING
- Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites
- (2018) Xiaolei Guo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Molecular dynamics simulation of nickel-coated graphene bending
- (2018) Konstantin P. Katin et al. Micro & Nano Letters
- Comparative study on mechanical properties of three different SiC polytypes (3C, 4H and 6H) under high pressure: First-principle calculations
- (2018) I. Peivaste et al. VACUUM
- Molecular dynamics study of strengthening mechanism of nanolaminated graphene/Cu composites under compression
- (2018) Shayuan Weng et al. Scientific Reports
- Micro-Mechanism of Interfacial Separation and Slippage of Graphene/Aluminum Nanolaminated Composites
- (2018) Jia-Qi Zhu et al. Nanomaterials
- Molecular dynamics studies of CNT-reinforced aluminum composites under uniaxial tensile loading
- (2016) Bong Kyu Choi et al. COMPOSITES PART B-ENGINEERING
- The typical manners of dynamic crack propagation along the metal/ceramics interfaces: A molecular dynamics study
- (2016) Yanguang Zhou et al. COMPUTATIONAL MATERIALS SCIENCE
- Interfacial strength and deformation mechanism of SiC–Al composite micro-pillars
- (2016) Xiaolei Guo et al. SCRIPTA MATERIALIA
- Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites
- (2016) Shisheng Li et al. MATERIALS & DESIGN
- Influence of interfaces on the mechanical behavior of SiC particulate-reinforced Al–Zn–Mg–Cu composites
- (2015) Jingya Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced Mechanical Properties of Graphene (Reduced Graphene Oxide)/Aluminum Composites with a Bioinspired Nanolaminated Structure
- (2015) Zan Li et al. NANO LETTERS
- Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics
- (2013) Nuno Silvestre et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Stability, elastic properties and electronic structures of the stable Zr–Al intermetallic compounds: A first-principles investigation
- (2013) Y.H. Duan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Gradient grain distribution and enhanced properties of novel laminated Ti–TiBw/Ti composites by reaction hot-pressing
- (2013) B.X. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of carbon nanotube length on thermal, electrical and mechanical properties of CNT/bismaleimide composites
- (2012) Xin Wang et al. CARBON
- Modeling the effect of statistical variations in length and diameter of randomly oriented CNTs on the properties of CNT reinforced nanocomposites
- (2012) S.C. Chowdhury et al. COMPOSITES PART B-ENGINEERING
- Reinforcement with graphene nanosheets in aluminum matrix composites
- (2012) Jingyue Wang et al. SCRIPTA MATERIALIA
- Molecular dynamics based cohesive zone law for describing Al–SiC interface mechanics
- (2011) Chinmaya R. Dandekar et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Critical size, recovery, and mechanical property of nanoimprinted Ni–Al alloys investigation using molecular dynamics simulation
- (2011) Cheng-Da Wu et al. COMPUTATIONAL MATERIALS SCIENCE
- Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect
- (2011) A. Sanaty-Zadeh MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- Thermodynamic approach to determine accurate potentials for molecular dynamics simulations: thermoelastic response of aluminum
- (2010) J M Winey et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- An enhanced continuum model for size-dependent strengthening and failure of particle-reinforced composites
- (2009) Yeong Sung Suh et al. ACTA MATERIALIA
- Effects of alloying elements on elastic properties of Ni by first-principles calculations
- (2009) DongEung Kim et al. COMPUTATIONAL MATERIALS SCIENCE
- Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
- (2009) Alexander Stukowski MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Multi-functional SiC/Al Composites for Aerospace Applications
- (2008) Cui Yan et al. Chinese Journal of Aeronautics
- Molecular dynamics simulations on nanoindentation mechanisms of multilayered films
- (2008) Te-Hua Fang et al. COMPUTATIONAL MATERIALS SCIENCE
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started