Mechanical performance of 3D printed interpenetrating phase composites with spinodal topologies

Extreme mechanical resilience of self-assembled nanolabyrinthine materials

(2020) Carlos M. Portela et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Plate-nanolattices at the theoretical limit of stiffness and strength

(2020) Cameron Crook et al.   Nature Communications

3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency

(2020) Mingyang Zhang et al.   Science Advances

A novel approach to fabricate ceramic/metal interpenetrating phase composites by ultrasonic-assisted spontaneous infiltration

(2020) Yushi Qi et al.   CERAMICS INTERNATIONAL

The mechanical response of cellular materials with spinodal topologies

(2019) Meng-Ting Hsieh et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Anomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloying

(2019) I.V. Okulov et al.   SCRIPTA MATERIALIA

Ultrahigh Energy Absorption Multifunctional Spinodal Nanoarchitectures

(2019) Anna Guell Izard et al.   Small

Enhancement of toughness of SiC through compositing SiC–Al interpenetrating phase composites

(2019) Lu Xie et al.   NANOTECHNOLOGY

3D-printed multimaterial composites tailored for compliancy and strain recovery

(2018) M.R. Mansouri et al.   COMPOSITE STRUCTURES

Minimal surface designs for porous materials: from microstructures to mechanical properties

(2018) Xiaoyang Zheng et al.   JOURNAL OF MATERIALS SCIENCE

Experimental investigation of mechanical properties of UV-Curable 3D printing materials

(2018) Sung Yong Hong et al.   POLYMER

Dealloying-based metal-polymer composites for biomedical applications

(2018) A.V. Okulov et al.   SCRIPTA MATERIALIA

Synthesis and mechanical properties of TiC-Fe interpenetrating phase composites fabricated by infiltration process

(2018) Yong Zheng et al.   CERAMICS INTERNATIONAL

Mechanical behavior of aluminum foam/polyurethane interpenetrating phase composites under monotonic and cyclic compression

(2018) Shaobo Liu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments

(2018) Colin Bonatti et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

The fracture toughness of octet-truss lattices

(2017) M.R. O’Masta et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements

(2016) Ahmed S. Dalaq et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Finite element prediction of effective elastic properties of interpenetrating phase composites with architectured 3D sheet reinforcements

(2016) Ahmed S. Dalaq et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials

(2016) Oraib Al-Ketan et al.   Advanced Materials Technologies

3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures

(2015) Sungmin Hong et al.   ADVANCED MATERIALS

A New Type of Low Density Material: Shellular

(2015) Seung Chul Han et al.   ADVANCED MATERIALS

Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites

(2015) Diab W. Abueidda et al.   COMPOSITE STRUCTURES

Cyclic compression behavior and energy dissipation of aluminum foam–polyurethane interpenetrating phase composites

(2015) Shaobo Liu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Simulation of damage and failure processes of interpenetrating SiC/Al composites subjected to dynamic compressive loading

(2014) Guoju Li et al.   ACTA MATERIALIA

3D-Printing of Lightweight Cellular Composites

(2014) Brett G. Compton et al.   ADVANCED MATERIALS

Periodic co-continuous acoustic metamaterials with overlapping locally resonant and Bragg band gaps

(2014) Yanyu Chen et al.   APPLIED PHYSICS LETTERS

Numerical prediction of elasto-plastic behaviour of interpenetrating phase composites by EFGM

(2013) Ankit Agarwal et al.   COMPOSITES PART B-ENGINEERING

The use of quasi-static testing to obtain the low-velocity impact damage resistance of marine GRP laminates

(2012) L.S. Sutherland et al.   COMPOSITES PART B-ENGINEERING

Improvements in spinodal alloys from past to present

(2012) Fehim Findik   MATERIALS & DESIGN

Periodic Bicontinuous Composites for High Specific Energy Absorption

(2012) Jae-Hwang Lee et al.   NANO LETTERS

Co-Continuous Composite Materials for Stiffness, Strength, and Energy Dissipation

(2011) Lifeng Wang et al.   ADVANCED MATERIALS

Preparation, microstructure and deformation behavior of Zr-based metallic glass/porous SiC interpenetrating phase composites

(2011) Yongli Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Bicontinuous Macroporous Materials from Bijel Templates

(2010) Matthew N. Lee et al.   ADVANCED MATERIALS

Concepts for enhanced energy absorption using hollow micro-lattices

(2010) A.G. Evans et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Nanoporous Gold: Fabrication, Characterization, and Applications

(2009) Erkin Seker et al.   Materials

Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite (IPC)

(2008) Rahul Jhaver et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution in nanoporous gold by thermal and acid treatments

(2007) Masataka Hakamada et al.   MATERIALS LETTERS