Evaluation and modeling of electrical conductivity in conductive polymer nanocomposite foams with multiwalled carbon nanotube networks

Facilitating supercritical CO2 assisted exfoliation of graphene nanoplatelets with the polymer matrix

(2020) Jun Wang et al.   CHEMICAL ENGINEERING JOURNAL

Theoretical modeling and experimental verification of percolation threshold with MWCNTs’ rotation and translation around a growing bubble in conductive polymer composite foams

(2020) Sai Wang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Prediction of electrical conductivity of polymer-graphene nanocomposites by developing an analytical model considering interphase, tunneling and geometry effects

(2020) J. Payandehpeyman et al.   COMPOSITES COMMUNICATIONS

Percolation mechanism and effective conductivity of mechanically deformed 3-dimensional composite networks: Computational modeling and experimental verification

(2020) Eunse Chang et al.   COMPOSITES PART B-ENGINEERING

A new analytical model for predicting the electrical conductivity of carbon nanotube nanocomposites

(2020) Zhen-Hua Tang et al.   COMPOSITES COMMUNICATIONS

Modeling the electrical resistivity of polymer composites with segregated structures

(2019) Sung-Hoon Park et al.   Nature Communications

Synthesis and investigation of SiO2-MgO coated MWCNTs and their potential application

(2019) Krisztian Nemeth et al.   Scientific Reports

Enhancing the electrical conductivity of PP/CNT nanocomposites through crystal-induced volume exclusion effect with a slow cooling rate

(2019) Jun Wang et al.   COMPOSITES PART B-ENGINEERING

Ultralight Microcellular Polymer–Graphene Nanoplatelet Foams with Enhanced Dielectric Performance

(2018) Mahdi Hamidinejad et al.   ACS Applied Materials & Interfaces

Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding

(2018) Guilong Wang et al.   CHEMICAL ENGINEERING JOURNAL

A simple model for electrical conductivity of polymer carbon nanotubes nanocomposites assuming the filler properties, interphase dimension, network level, interfacial tension and tunneling distance

(2018) Yasser Zare et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Eliminating common biases in modelling the electrical conductivity of carbon nanotube–polymer nanocomposites

(2018) Linh Trong Hoang et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Modelling of Rod-Like Fillers’ Rotation and Translation near Two Growing Cells in Conductive Polymer Composite Foam Processing

(2018) Sai Wang et al.   Polymers

Enhanced Electrical and Electromagnetic Interference Shielding Properties of Polymer–Graphene Nanoplatelet Composites Fabricated via Supercritical-Fluid Treatment and Physical Foaming

(2018) Mahdi Hamidinejad et al.   ACS Applied Materials & Interfaces

A versatile foaming platform to fabricate polymer/carbon composites with high dielectric permittivity and ultra-low dielectric loss

(2018) Biao Zhao et al.   Journal of Materials Chemistry A

Conductive network formation and destruction in polypropylene/carbon nanotube composites via crystal control using supercritical carbon dioxide

(2017) Yasamin Kazemi et al.   POLYMER

A simple methodology to predict the tunneling conductivity of polymer/CNT nanocomposites by the roles of tunneling distance, interphase and CNT waviness

(2017) Yasser Zare et al.   RSC Advances

Experimental observation and modeling of fiber rotation and translation during foam injection molding of polymer composites

(2016) Vahid Shaayegan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Improving the filler dispersion of polychloroprene/carboxylated multi-walled carbon nanotubes composites by non-covalent functionalization of carboxylated ionic liquid

(2016) Guiyang Jiang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Significantly enhanced electrical conductivity of silver nanowire/polyurethane composites via graphene oxide as novel dispersant

(2016) Yan-Hong Ji et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Lightweight and Anisotropic Porous MWCNT/WPU Composites for Ultrahigh Performance Electromagnetic Interference Shielding

(2015) Zhihui Zeng et al.   ADVANCED FUNCTIONAL MATERIALS

Electrically conductive polycarbonate/carbon nanotube composites toughened with micron-scale voids

(2015) Xin Zhi et al.   CARBON

Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors

(2015) A. Ameli et al.   CHEMICAL ENGINEERING JOURNAL

Evaluation and modelling of electrically conductive polymer nanocomposites with carbon nanotube networks

(2015) Weiqing Fang et al.   COMPOSITES PART B-ENGINEERING

Influence of ultrasonic dual mixing on thermal and tensile properties of MWCNTs-epoxy composite

(2015) P.K. Ghosh et al.   COMPOSITES PART B-ENGINEERING

A facile method to increase the charge storage capability of polymer nanocomposites

(2015) Aboutaleb Ameli et al.   Nano Energy

Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference Shielding

(2014) Aboutaleb Ameli et al.   ACS Applied Materials & Interfaces

Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold

(2014) A. Ameli et al.   CARBON

Investigation of uniaxial stretching effects on the electrical conductivity of CNT–polymer nanocomposites

(2014) C Feng et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Polymer foaming with chemical blowing agents: Experiment and modeling

(2014) José Antonio Reglero Ruiz et al.   POLYMER ENGINEERING AND SCIENCE

Conductive polymer composites with segregated structures

(2014) Huan Pang et al.   PROGRESS IN POLYMER SCIENCE

Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams

(2013) A. Ameli et al.   CARBON

Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites

(2013) Chuang Feng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Length-dependent electrical and thermal properties of carbon nanotube-loaded epoxy nanocomposites

(2013) Michael Russ et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of carbon nanotube geometry upon tunneling assisted electrical network in nanocomposites

(2013) W. S. Bao et al.   JOURNAL OF APPLIED PHYSICS

The influence of foam morphology of multi-walled carbon nanotubes/poly(methyl methacrylate) nanocomposites on electrical conductivity

(2013) Minh-Phuong Tran et al.   POLYMER

Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials

(2013) Hua Deng et al.   PROGRESS IN POLYMER SCIENCE

Influence of lengths of millimeter-scale single-walled carbon nanotube on electrical and mechanical properties of buckypaper

(2013) Shunsuke Sakurai et al.   Nanoscale Research Letters

Comparative study of electromagnetic interference shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene composites

(2012) Mohammad Arjmand et al.   CARBON

Effect of carbon nanotube length on thermal, electrical and mechanical properties of CNT/bismaleimide composites

(2012) Xin Wang et al.   CARBON

Through-plane electrical conductivity of injection-molded polypropylene/carbon-fiber composite foams

(2012) A. Ameli et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Tunneling resistance and its effect on the electrical conductivity of carbon nanotube nanocomposites

(2012) W. S. Bao et al.   JOURNAL OF APPLIED PHYSICS

Electrical conductivity of polyurethane/MWCNT nanocomposite foams

(2012) N. Athanasopoulos et al.   POLYMER COMPOSITES

Tough Graphene−Polymer Microcellular Foams for Electromagnetic Interference Shielding

(2011) Hao-Bin Zhang et al.   ACS Applied Materials & Interfaces

The estimation of cell density in isotropic microcellular polymeric foams using the critical bubble lattice

(2011) Piyapong Buahom et al.   JOURNAL OF CELLULAR PLASTICS

A novel approach to predict the electrical conductivity of multifunctional nanocomposites

(2011) W.S. Bao et al.   MECHANICS OF MATERIALS

Modeling electrical conductivities of nanocomposites with aligned carbon nanotubes

(2011) W S Bao et al.   NANOTECHNOLOGY

Establishment, morphology and properties of carbon nanotube networks in polymer melts

(2011) Ingo Alig et al.   POLYMER

A three-dimensional model of electrical percolation thresholds in carbon nanotube-based composites

(2010) Weibang Lu et al.   APPLIED PHYSICS LETTERS

Broad-band electrical conductivity of carbon nanofibre-reinforced polypropylene foams

(2010) Marcelo Antunes et al.   CARBON

Determinant role of tunneling resistance in electrical conductivity of polymer composites reinforced by well dispersed carbon nanotubes

(2010) Y. Yu et al.   JOURNAL OF APPLIED PHYSICS

Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor

(2009) Ning Hu et al.   CARBON

Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites

(2009) Li Chang et al.   JOURNAL OF MATERIALS SCIENCE

Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties

(2009) Zdenko Spitalsky et al.   PROGRESS IN POLYMER SCIENCE

Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor

(2008) Ning Hu et al.   ACTA MATERIALIA

An analytical model of effective electrical conductivity of carbon nanotube composites

(2008) Fei Deng et al.   APPLIED PHYSICS LETTERS

Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing

(2008) Bani H. Cipriano et al.   POLYMER

A three-dimensional Monte Carlo model for electrically conductive polymer matrix composites filled with curved fibers

(2008) H.M. Ma et al.   POLYMER