Bionic topology optimization of fins for rapid latent heat thermal energy storage

Performance study of phase change materials coupled with three-dimensional oscillating heat pipes with different structures for electronic cooling

(2020) Yun-Zhi Ling et al.   RENEWABLE ENERGY

An experimental and numerical investigation on a paraffin wax/graphene oxide/carbon nanotubes composite material for solar thermal storage applications

(2020) Guijun Chen et al.   APPLIED ENERGY

Effects of fluctuating thermal sources on a shell-and-tube latent thermal energy storage during charging process

(2020) Zhi Li et al.   ENERGY

A novel chaotic system without equilibria, with parachute and thumb shapes of Poincare map and its projective synchronisation

(2020) Piyush Pratap Singh et al.   European Physical Journal-Special Topics

Optimizing heat-absorption efficiency of phase change materials by mimicking leaf vein morphology

(2020) Honglei Liu et al.   APPLIED ENERGY

Topology optimization design of nanofluid-cooled microchannel heat sink with temperature-dependent fluid properties

(2020) Bin Zhang et al.   APPLIED THERMAL ENGINEERING

High-Performance Phase-Change Materials Based on Paraffin and Expanded Graphite for Solar Thermal Energy Storage

(2020) Guihua Fang et al.   ENERGY & FUELS

Charging performance optimization of a latent heat storage unit with fractal tree-like fins

(2020) Cheng Yu et al.   Journal of Energy Storage

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

(2020) Minghao Yu et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Topology optimization of thermal–fluid problem using the MMC-based approach

(2019) Minghao Yu et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Maximization of performance in multi-tube latent heat storage – Optimization of fins topology, effect of materials selection and flow arrangements

(2019) Alberto Pizzolato et al.   ENERGY

Design of segmented thermoelectric Peltier coolers by topology optimization

(2019) Christian Lundgaard et al.   APPLIED ENERGY

A study on practical objectives and constraints for heat conduction topology optimization

(2019) Danny J. Lohan et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Topology optimization of liquid-cooled microchannel heat sinks: An experimental and numerical study

(2019) Shi Zeng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Topology optimization of fins for energy storage tank with phase change material

(2019) Ming Zhao et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam

(2019) Xiaohu Yang et al.   APPLIED ENERGY

Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change material-metal foam

(2019) Mohammad Ghalambaz et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation of energy storage properties and thermal conductivity of a novel organic phase change material/MXene as A new class of nanocomposites

(2019) Navid Aslfattahi et al.   Journal of Energy Storage

Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins

(2018) Jasim M. Mahdi et al.   APPLIED ENERGY

Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation

(2018) Antonella D'Alessandro et al.   APPLIED ENERGY

Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger

(2018) Jasim M. Mahdi et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Investigation on the thermophysical properties and transient heat transfer characteristics of composite phase change materials

(2018) Yu-Jen Chiu et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Experimental and numerical investigations of fluid flow and heat transfer in a bioinspired surface enriched microchannel

(2018) Prasenjit Dey et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Numerical investigation of heat transfer and flow characteristics of laminar flow in a tube with center-tapered wavy-tape insert

(2018) Yunmin Liang et al.   APPLIED THERMAL ENGINEERING

Enhanced thermal management with microencapsulated phase change material particles infiltrated in cellular metal foam

(2017) Wenqiang Li et al.   ENERGY

Topology optimization for heat transfer enhancement in Latent Heat Thermal Energy Storage

(2017) Alberto Pizzolato et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Optimal location of PCM layer in building walls under Nanjing (China) weather conditions

(2017) Xing Jin et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Parameter effect of a phase change thermal energy storage unit with one shell and one finned tube on its energy efficiency ratio and heat storage rate

(2016) Wei-Wei Wang et al.   APPLIED THERMAL ENGINEERING

Thermal properties and heat storage analysis of palmitic acid-TiO 2 composite as nano-enhanced organic phase change material (NEOPCM)

(2016) R.K. Sharma et al.   APPLIED THERMAL ENGINEERING

Heat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices

(2016) Ping Li et al.   Entropy

Numerical study of phase change material based orthotropic heat sink for thermal management of electronics components

(2016) Santosh Kumar Sahoo et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical simulation of flow instability and heat transfer of natural convection in a differentially heated cavity

(2016) Hua-Shu Dou et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Nature-inspired Inverted Fish Scale microscale passages for enhanced heat transfer

(2016) Aik Ling Goh et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage

(2016) Yanping Yuan et al.   SOLAR ENERGY

Drag reduction characteristics and flow field analysis of textured surface

(2016) Qingshun Bai et al.   Friction

Maximization of performance of a PCM latent heat storage system with innovative fins

(2015) A. Sciacovelli et al.   APPLIED ENERGY

Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developments

(2015) Ben Xu et al.   APPLIED ENERGY

Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins

(2015) Manish K. Rathod et al.   APPLIED THERMAL ENGINEERING

Recurrent Filmwise and Dropwise Condensation on a Beetle Mimetic Surface

(2014) Youmin Hou et al.   ACS Nano

Experimental Investigations on Latent Heat Storage Unit using Paraffin Wax as Phase Change Material

(2013) M. K. Rathod et al.   EXPERIMENTAL HEAT TRANSFER

Impact Factors Analysis of the Enthalpy Method and the Effective Heat Capacity Method on the Transient Nonlinear Heat Transfer in Phase Change Materials (PCMs)

(2013) Y. Zhang et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Numerical simulation and experimental study of drag-reducing surface of a real shark skin

(2011) De-yuan ZHANG et al.   Journal of Hydrodynamics

On projection methods, convergence and robust formulations in topology optimization

(2010) Fengwen Wang et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins

(2009) Francis Agyenim et al.   SOLAR ENERGY