Substrate‐Versatile Direct‐Write Printing of Carbon Nanotube‐Based Flexible Conductors, Circuits, and Sensors

Ratiometric upconversion nanothermometry with dual emission at the same wavelength decoded via a time-resolved technique

(2020) Xiaochen Qiu et al.   Nature Communications

Improved Properties, Increased Production, and the Path to Broad Adoption of Carbon Nanotube Fibers

(2020) Lauren W. Taylor et al.   CARBON

Stretchable Conductive Polymers and Composites Based on PEDOT and PEDOT:PSS

(2019) Laure V. Kayser et al.   ADVANCED MATERIALS

3D Capillary-Driven Paper-Based Sequential Microfluidic Device for Electrochemical Sensing Applications

(2019) Abdulhadee Yakoh et al.   ACS Sensors

Yielding and recovery of conductive pastes for screen printing

(2019) Gavin J. Donley et al.   RHEOLOGICA ACTA

A highly transparent and ultra-stretchable conductor with stable conductivity during large deformation

(2019) Zhouyue Lei et al.   Nature Communications

Electrokinetic Trapping of Microparticles Using Paper-and-Pencil Microfluidics

(2019) Sankha Shuvra Das et al.   Physical Review Applied

RAFT Polymerization of an Intrinsically Stretchable Water-Soluble Block Copolymer Scaffold for PEDOT

(2018) Laure V. Kayser et al.   CHEMISTRY OF MATERIALS

Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model

(2018) Yiwei Weng et al.   CONSTRUCTION AND BUILDING MATERIALS

Highly Concentrated Aqueous Dispersions of Carbon Nanotubes for Flexible and Conductive Fibers

(2018) Laurent Maillaud et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

High-precision modular microfluidics by micromilling of interlocking injection-molded blocks

(2018) Crystal E. Owens et al.   LAB ON A CHIP

Flexible Devices: Ultrastretchable Kirigami Bioprobes (Adv. Healthcare Mater. 3/2018)

(2018) Yusuke Morikawa et al.   Advanced Healthcare Materials

How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study

(2018) Chenhui Xu et al.   Journal of Coatings Technology and Research

Influence of Humidity on Contact Resistance in Graphene Devices

(2018) Arne Quellmalz et al.   ACS Applied Materials & Interfaces

Printability study of hydrogel solution extrusion in nanoclay yield-stress bath during printing-then-gelation biofabrication

(2017) Yifei Jin et al.   Materials Science & Engineering C-Materials for Biological Applications

3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio

(2017) Pengli Yan et al.   Small

A highly stretchable, transparent, and conductive polymer

(2017) Yue Wang et al.   Science Advances

Charged iodide in chains behind the highly efficient iodine doping in carbon nanotubes

(2017) Ahmed Zubair et al.   PHYSICAL REVIEW MATERIALS

Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing

(2017) Amin M’Barki et al.   Scientific Reports

Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink

(2016) Jung Hyun Kim et al.   ACS Nano

Multiresponsive Bidirectional Bending Actuators Fabricated by a Pencil-on-Paper Method

(2016) Mingcen Weng et al.   ADVANCED FUNCTIONAL MATERIALS

Evaporation of water: evaporation rate and collective effects

(2016) Odile Carrier et al.   JOURNAL OF FLUID MECHANICS

Relationship of Extensional Viscosity and Liquid Crystalline Transition to Length Distribution in Carbon Nanotube Solutions

(2016) Dmitri E. Tsentalovich et al.   MACROMOLECULES

Enlightening the ultrahigh electrical conductivities of doped double-wall carbon nanotube fibers by Raman spectroscopy and first-principles calculations

(2016) Damien Tristant et al.   Nanoscale

3D Printing of Graphene Aerogels

(2016) Qiangqiang Zhang et al.   Small

Shape-morphing composites with designed micro-architectures

(2016) Jennifer N. Rodriguez et al.   Scientific Reports

Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling

(2015) Giovanni Postiglione et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Highly elastic conductive polymeric MEMS

(2015) J Ruhhammer et al.   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Controlling Adhesion Properties of SWCNT–PET Films Prepared by Wet Deposition

(2014) Suzanna Azoubel et al.   ACS Applied Materials & Interfaces

Electrical Properties of Carbon Nanotube Based Fibers and Their Future Use in Electrical Wiring

(2014) Agnieszka Lekawa-Raus et al.   ADVANCED FUNCTIONAL MATERIALS

3D-Printing of Lightweight Cellular Composites

(2014) Brett G. Compton et al.   ADVANCED MATERIALS

Humidity-sensing characteristics of multi-walled carbon nanotube sheet

(2014) Daewoong Jung et al.   MATERIALS LETTERS

Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing

(2013) Yu-Feng Liu et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Inkjet printing of precisely defined features using contact-angle hysteresis

(2013) Dan Soltman et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity

(2013) N. Behabtu et al.   SCIENCE

High-Performance Carbon Nanotube Transparent Conductive Films by Scalable Dip Coating

(2012) Francesca Mirri et al.   ACS Nano

Extrusion Printing of Flexible Electrically Conducting Carbon Nanotube Networks

(2012) Geoffrey C. Pidcock et al.   ADVANCED FUNCTIONAL MATERIALS

Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes

(2012) Suzanna Azoubel et al.   NANOTECHNOLOGY

From percolating to dense random stick networks: Conductivity model investigation

(2012) Milan Žeželj et al.   PHYSICAL REVIEW B

A Review: Carbon Nanotube-Based Piezoresistive Strain Sensors

(2012) Waris Obitayo et al.   Journal of Sensors

Cholesteric and Nematic Liquid Crystalline Phase Behavior of Double-Stranded DNA Stabilized Single-Walled Carbon Nanotube Dispersions

(2011) Geyou Ao et al.   ACS Nano

Stretching skin: The physiological limit and beyond

(2011) Adrián Buganza Tepole et al.   INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS

Combined XPS and contact angle studies of flat and rough ethylene-vinyl acetate copolymer films

(2011) M. D. Doganci et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Analysis of the Equilibrium Droplet Shape Based on an Ellipsoidal Droplet Model

(2011) Vlado A. Lubarda et al.   LANGMUIR

Influence of gravity on the spreading of two-dimensional droplets over topographical substrates

(2010) N. Savva et al.   JOURNAL OF ENGINEERING MATHEMATICS

Shear rheology of carbon nanotube suspensions

(2010) Erik K. Hobbie   RHEOLOGICA ACTA

Continuous and Scalable Fabrication of Transparent Conducting Carbon Nanotube Films

(2009) Budhadipta Dan et al.   ACS Nano

Foldable Printed Circuit Boards on Paper Substrates

(2009) Adam C. Siegel et al.   ADVANCED FUNCTIONAL MATERIALS

A Novel Conformal RFID-Enabled Module Utilizing Inkjet-Printed Antennas and Carbon Nanotubes for Gas-Detection Applications

(2009) Li Yang et al.   IEEE Antennas and Wireless Propagation Letters

Dynamic wetting and spreading and the role of topography

(2009) Glen McHale et al.   JOURNAL OF PHYSICS-CONDENSED MATTER

Elastic Moduli of Organic Electronic Materials by the Buckling Method

(2009) Dongha Tahk et al.   MACROMOLECULES

True solutions of single-walled carbon nanotubes for assembly into macroscopic materials

(2009) Virginia A. Davis et al.   Nature Nanotechnology

Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes

(2009) B. Y. Ahn et al.   SCIENCE

Humidity Sensitivity of Multi-Walled Carbon Nanotube Networks Deposited by Dielectrophoresis

(2009) Litao Liu et al.   SENSORS

Stretchable Electronics: Materials Strategies and Devices

(2008) Dae-Hyeong Kim et al.   ADVANCED MATERIALS

A review and analysis of electrical percolation in carbon nanotube polymer composites

(2008) Wolfgang Bauhofer et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Towards non- and minimally instrumented, microfluidics-based diagnostic devices

(2008) Bernhard Weigl et al.   LAB ON A CHIP

Comparison of the Quality of Aqueous Dispersions of Single Wall Carbon Nanotubes Using Surfactants and Biomolecules

(2008) Reto Haggenmueller et al.   LANGMUIR

The electrical properties of polymer nanocomposites with carbon nanotube fillers

(2008) Ning Hu et al.   NANOTECHNOLOGY

Filament stretching of carbon nanotube suspensions

(2008) Anson W. K. Ma et al.   RHEOLOGICA ACTA

Stretchable and Foldable Silicon Integrated Circuits

(2008) D.-H. Kim et al.   SCIENCE

Carbon Nanotubes as Liquid Crystals

(2008) Shanju Zhang et al.   Small

Mechanical characterization of PEDOT:PSS thin films

(2008) Udo Lang et al.   SYNTHETIC METALS

The microstructure and rheology of carbon nanotube suspensions

(2008) Anson W. K. Ma et al.   International Journal of Material Forming