Printable and Semitransparent Nonfullerene Organic Solar Modules over 30 cm2 Introducing an Energy-Level Controllable Hole Transport Layer

Flexible All‐Solution‐Processed Organic Solar Cells with High‐Performance Nonfullerene Active Layers

(2020) Lulu Sun et al.   ADVANCED MATERIALS

Optimizing the component ratio of PEDOT:PSS by water rinse for high efficiency organic solar cells over 16.7%

(2020) Qicong Li et al.   Science Bulletin

18% Efficiency organic solar cells

(2020) Qishi Liu et al.   Science Bulletin

Solution-Processable PEDOT:PSS:α-In2Se3 with Enhanced Conductivity as a Hole Transport Layer for High-Performance Polymer Solar Cells

(2020) Jianming Wang et al.   ACS Applied Materials & Interfaces

Narrow Bandpass and Efficient Semitransparent Organic Solar Cells Based on Bioinspired Spectrally Selective Electrodes

(2020) Shu Wang et al.   ACS Nano

Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

(2020) Yong Cui et al.   ADVANCED MATERIALS

Printable SnO2 cathode interlayer with up to 500 nm thickness-tolerance for high-performance and large-area organic solar cells

(2020) Yiming Bai et al.   Science China-Chemistry

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells

(2020) Jia Yao et al.   Nature Communications

High‐Performance Tandem Organic Solar Cells Using HSolar as the Interconnecting Layer

(2020) Carr Hoi Yi Ho et al.   Advanced Energy Materials

High-Performance Nonfullerene Organic Photovoltaics Applicable for Both Outdoor and Indoor Environments through Directional Photon Energy Transfer

(2020) Yong Woon Han et al.   ACS Applied Materials & Interfaces

Low‐Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications

(2020) Ke Gao et al.   ADVANCED MATERIALS

A Cost‐Effective, Aqueous‐Solution‐Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells

(2020) Mengqi Cui et al.   ADVANCED MATERIALS

A thiophene-fused benzotriazole unit as a “π-bridge” in A-π-D-π-A type acceptor to achieve more balanced JSC and VOC for OSCs

(2020) Jiacheng Wang et al.   ORGANIC ELECTRONICS

Highly Efficient Nonfullerene Organic Photovoltaic Devices with 10% Power Conversion Efficiency Enabled by a Fine‐Tuned and Solution‐Processed Hole‐Transporting Layer

(2020) Nai-Wei Teng et al.   Solar RRL

Analytical Model for Photocurrent in Organic Solar Cells as a Function of the Charge-Transport Figure of Merit Including Second-Order Recombination

(2020) Daniel R.B. Amorim et al.   Physical Review Applied

Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability

(2020) Yuanbao Lin et al.   ACS Energy Letters

Single-Component Non-halogen Solvent-Processed High-Performance Organic Solar Cell Module with Efficiency over 14%

(2020) Sheng Dong et al.   Joule

Origin of Open‐Circuit Voltage Turnover in Organic Solar Cells at Low Temperature

(2020) Yahui Tang et al.   Solar RRL

12.5% Flexible Nonfullerene Solar Cells by Passivating the Chemical Interaction Between the Active Layer and Polymer Interfacial Layer

(2019) Sixing Xiong et al.   ADVANCED MATERIALS

Impact of Eumelanin-PEDOT Blending: Increased PEDOT Crystalline Order and Packing-Conductivity Relationship in Ternary PEDOT:PSS:Eumelanin Thin Films

(2019) Ludovico Migliaccio et al.   Advanced Electronic Materials

Key Parameters Requirements for Non-Fullerene-Based Organic Solar Cells with Power Conversion Efficiency >20%

(2019) Yuliar Firdaus et al.   Advanced Science

Stability of Nonfullerene Organic Solar Cells: from Built‐in Potential and Interfacial Passivation Perspectives

(2019) Yiwen Wang et al.   Advanced Energy Materials

Achieving over 16% efficiency for single-junction organic solar cells

(2019) Baobing Fan et al.   Science China-Chemistry

p-Doped Conducting Polyelectrolyte as an Anode Interlayer Enables High Efficiency for 1 cm2 Printed Organic Solar Cells

(2019) Qian Kang et al.   ACS Applied Materials & Interfaces

Medium‐Bandgap Conjugated Polymer Donors for Organic Photovoltaics

(2019) Liya Sun et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Ternary Organic Solar Cells with Small Nonradiative Recombination Loss

(2019) Yuanpeng Xie et al.   ACS Energy Letters

Phase Stability Diagrams of Group 6 Magnéli Oxides and Their Implications for Photon-Assisted Applications

(2019) Yun-Jae Lee et al.   CHEMISTRY OF MATERIALS

PEDOT:PSS for Flexible and Stretchable Electronics: Modifications, Strategies, and Applications

(2019) Xi Fan et al.   Advanced Science

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS 2 as a Replacement for PEDOT:PSS

(2019) Yuanbao Lin et al.   ADVANCED MATERIALS

A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells

(2019) Xiangchuan Meng et al.   ADVANCED MATERIALS

13.9%‐Efficiency and Eco‐Friendly Nonfullerene Polymer Solar Cells Obtained by Balancing Molecular Weight and Solubility in Chlorinated Thiophene‐Based Polymer Backbones

(2019) Sung Jae Jeon et al.   Small

Evaporation‐Free Nonfullerene Flexible Organic Solar Cell Modules Manufactured by An All‐Solution Process

(2019) Yong Woon Han et al.   Advanced Energy Materials

Trade‐Off between Exciton Dissociation and Carrier Recombination and Dielectric Properties in Y6‐Sensitized Nonfullerene Ternary Organic Solar Cells

(2019) Leiping Duan et al.   Energy Technology

Highly Efficient and High Peak Transmittance Colorful Semitransparent Organic Solar Cells with Hybrid-Electrode-Mirror Microcavity Structure

(2019) Jinyao Zhong et al.   ACS Applied Materials & Interfaces

Beyond Fullerenes: Indacenodithiophene-Based Organic Charge-Transport Layer toward Upscaling of Low-Cost Perovskite Solar Cells

(2018) Dechan Angmo et al.   ACS Applied Materials & Interfaces

Printable MoO x Anode Interlayers for Organic Solar Cells

(2018) Qian Kang et al.   ADVANCED MATERIALS

P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods

(2018) S. Strohm et al.   Energy & Environmental Science

Over 100-nm-Thick MoO x Films with Superior Hole Collection and Transport Properties for Organic Solar Cells

(2018) Bei Yang et al.   Advanced Energy Materials

Vertical Phase Separation for Highly Efficient Organic Solar Cells Incorporating Conjugated-Polyelectrolytes

(2018) Yong Woon Han et al.   Advanced Materials Interfaces

Structural and electrochemical properties of spray deposited molybdenum trioxide (α-MoO3) thin films

(2017) S. A. Khalate et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Transparent WO 3 /Ag/WO 3 electrode for flexible organic solar cells

(2017) Yishan Wang et al.   MATERIALS LETTERS

Medium Bandgap Polymer Donor Based on Bi(trialkylsilylthienyl-benzo[1,2-b:4,5-b′]-difuran) for High Performance Nonfullerene Polymer Solar Cells

(2017) Haijun Bin et al.   Advanced Energy Materials

Functional solid additive modified PEDOT:PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells

(2017) Binrui Xu et al.   Scientific Reports

MoO3-induced oxidation doping of PEDOT:PSS for high performance full-solution-processed inverted quantum-dot light emitting diodes

(2017) Min-Hsuan Lee et al.   Journal of Materials Chemistry C

A highly stretchable, transparent, and conductive polymer

(2017) Yue Wang et al.   Science Advances

Structurally-driven Enhancement of Thermoelectric Properties within Poly(3,4-ethylenedioxythiophene) thin Films

(2016) Ioannis Petsagkourakis et al.   Scientific Reports

Solution-Processed Small-Molecule Bulk Heterojunctions: Leakage Currents and the Dewetting Issue for Inverted Solar Cells

(2015) Elodie Destouesse et al.   ACS Applied Materials & Interfaces

Nafion-Modified MoOx as Effective Room-Temperature Hole Injection Layer for Stable, High-Performance Inverted Organic Solar Cells

(2015) Weiming Qiu et al.   ACS Applied Materials & Interfaces

Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells

(2015) Yiling Wang et al.   ACS Applied Materials & Interfaces

Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells

(2015) Fuzhi Wang et al.   Energy & Environmental Science

HOMO energy level regulation of novel conjugated copolymers for polymer solar cells

(2015) Jianfeng Zhang et al.   NEW JOURNAL OF CHEMISTRY

Enhanced electroluminescent efficiency with ionic liquid doped into PEDOT:PSS hole-injecting layer

(2015) Yingliang Liu et al.   POLYMER

Efficient hole transport layers with widely tunable work function for deep HOMO level organic solar cells

(2015) Jiaqi Cheng et al.   Journal of Materials Chemistry A

Optimization of the Power Conversion Efficiency of Room Temperature-Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer

(2014) Lie Chen et al.   ADVANCED FUNCTIONAL MATERIALS

Real-time measurement of optical anisotropy during film growth using a chemical mist deposition of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)

(2014) T. Hiate et al.   JOURNAL OF APPLIED PHYSICS

Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics

(2013) Fengxian Xie et al.   ADVANCED MATERIALS

“Secondary doping” methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices

(2013) Jianyong Ouyang   DISPLAYS

Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells

(2012) Fang Jeng Lim et al.   JOURNAL OF MATERIALS CHEMISTRY

Open-circuit voltage in organic solar cells

(2012) Boyuan Qi et al.   JOURNAL OF MATERIALS CHEMISTRY

Materials interface engineering for solution-processed photovoltaics

(2012) Michael Graetzel et al.   NATURE

Nanostructured Tungsten Oxide - Properties, Synthesis, and Applications

(2011) Haidong Zheng et al.   ADVANCED FUNCTIONAL MATERIALS

Selective Dye Loading at the Heterojunction in Polymer/Fullerene Solar Cells

(2011) Satoshi Honda et al.   Advanced Energy Materials

Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell

(2010) Kion Norrman et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells

(2009) Seok-In Na et al.   JOURNAL OF MATERIALS CHEMISTRY