Hot deformation behaviors of low-alloyed ultrahigh strength steel 30CrMnSiNi2A: Microstructure evolution and constitutive modeling
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Hot deformation behaviors of low-alloyed ultrahigh strength steel 30CrMnSiNi2A: Microstructure evolution and constitutive modeling
Authors
Keywords
Low-alloyed ultrahigh strength steel, Dynamic recrystallization, Hot deformation behaviors, Constitutive model
Journal
Materials Today Communications
Volume 26, Issue -, Pages 102009
Publisher
Elsevier BV
Online
2021-01-10
DOI
10.1016/j.mtcomm.2021.102009
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- The modified temperature term on Johnson-Cook constitutive model of AZ31 magnesium alloy with {0002} texture
- (2020) Feng Zhang et al. Journal of Magnesium and Alloys
- Creep Characteristics and Fracture Mechanisms of a Ni‐Based Superalloy with δ Phases at Intermediate Temperatures
- (2020) Dao-Guang He et al. ADVANCED ENGINEERING MATERIALS
- A modified Johnson-Cook model considering strain softening of A356 alloy
- (2020) Liqun Niu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of MnS inclusions on plastic deformation and fracture behavior of the steel matrix at high temperature
- (2020) Can Wang et al. VACUUM
- Microstructure and Properties of a 2.25Cr1Mo0.25V Heat-Resistant Steel Produced by Wire Arc Additive Manufacturing
- (2020) Chun Guo et al. Advances in Materials Science and Engineering
- Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy
- (2020) Y.C. Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Research on hot deformation behavior of Zr-4 alloy based on PSO-BP artificial neural network
- (2020) Peng Wan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental Determination and Theoretical Prediction of Limiting Strains for ASS 316L at Hot Forming Conditions
- (2020) Baloji Dharavath et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Forming and fracture limits of IN718 alloy at elevated temperatures: Experimental and theoretical investigation
- (2020) Gauri Mahalle et al. Journal of Manufacturing Processes
- Deformation-induced martensite in austenitic stainless steels: A review
- (2020) Mohammad Javad Sohrabi et al. Archives of Civil and Mechanical Engineering
- Hot compression deformation behavior and processing maps of ATI 718Plus superalloy
- (2020) Jianbo Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A comparative study on hot deformation behaviours of low-carbon and medium-carbon vanadium microalloyed steels
- (2020) Haitao Zhao et al. Journal of Materials Research and Technology-JMR&T
- Microstructure characterization and tensile properties of hot isostatic pressed China ultrahigh strength steel
- (2020) Youteng Duan et al. Journal of Materials Research and Technology-JMR&T
- Effect of rotation and traverse speeds on the microstructure and mechanical properties of friction stir processed 2205 duplex stainless steel
- (2020) S. Ghadar et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Hot deformation behavior and processing map development of cryorolled AA6063 alloy under compression and tension
- (2020) O.B. Bembalge et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys
- (2020) Guan Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson–Cook model
- (2019) Xingrui Chen et al. Journal of Materials Research and Technology-JMR&T
- A comparative study on the hot deformation behavior of Ti 5Al 5Mo 5V 3Cr and newly developed Ti 4Al 7Mo 3V 3Cr alloys
- (2019) A. Momeni et al. VACUUM
- Microstructure and mechanical properties of laser solid formed 30Cr–Mn–Si–Ni–2A ultra-high-strength steel
- (2019) M. Wang et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- A comparative study on the hot deformation behavior of 410 stainless and K100 tool steels
- (2019) S. Ghadar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM
- (2019) Guo-zheng QUAN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Determination of dynamic recrystallization parameter domains of Ni80A superalloy by enhanced processing maps
- (2019) Guo-zheng QUAN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- In-situ observations and modeling of metadynamic recrystallization in 300M steel
- (2019) Mingjie Zhao et al. MATERIALS CHARACTERIZATION
- Review on modeling and simulation of microstructure evolution during dynamic recrystallization using cellular automaton method
- (2019) HuaJia Zhu et al. Science China-Technological Sciences
- Deformation characteristics and strain-compensated constitutive equation for AA5083 aluminum alloy under hot compression
- (2019) Qing-song DAI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Hot tensile deformation and fracture behaviors of a typical ultrahigh strength steel
- (2019) DongXu Wen et al. VACUUM
- Constitutive equation and model validation for 33Cr23Ni8Mn3N heat-resistant steel during hot compression
- (2019) Zhongman Cai et al. Results in Physics
- A physically-based constitutive modelling of a high strength aluminum alloy at hot working conditions
- (2018) Hongming Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A physically based constitutive model of As-forged 34CrNiMo6 steel and processing maps for hot working
- (2018) B. Gong et al. VACUUM
- Effects of temperature and strain rate on the dynamic recrystallization of a medium-high-carbon high-silicon bainitic steel during hot deformation
- (2018) Ying Han et al. VACUUM
- Hot deformation behavior and processing maps of AISI 420 martensitic stainless steel
- (2018) Facai Ren et al. Journal of Manufacturing Processes
- Prediction on hot deformation behavior of spray-formed 7055 aluminum alloy via phenomenological models
- (2018) Xiang-dong WANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension
- (2018) Hamed Mirzadeh International Journal of Material Forming
- Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map
- (2018) Zhiqiang Wu et al. VACUUM
- Hot deformation behavior and microstructure evolution of Ti-6Cr-5Mo-5V-4Al alloy during hot compression
- (2018) Shuai Long et al. VACUUM
- Hot deformation characteristics and processing parameter optimization of 2219 Al alloy using constitutive equation and processing map
- (2018) Hailin He et al. VACUUM
- Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2 A at high strain rates and elevated temperatures
- (2017) Qiu-lin Niu et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Microstructure and mechanical properties of Cr14 ultra-high-strength steel at different tempering temperatures around 773 K
- (2017) Yangpeng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study on the microstructure and mechanical properties of Aermet 100 steel at the tempering temperature around 482 °C
- (2016) Xiaohui Shi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A study on the multi-phase transformation kinetics of ultra-high-strength steel and application in thermal-mechanical-phase coupling simulation of hot stamping process
- (2016) Guo-zheng Quan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels
- (2016) Tina Mirzaie et al. MECHANICS OF MATERIALS
- Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel
- (2016) Nima Haghdadi et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression
- (2015) Ruihua Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation
- (2015) Zohreh Akbari et al. MATERIALS & DESIGN
- A physically-based constitutive model for SA508-III steel: Modeling and experimental verification
- (2015) Dingqian Dong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Flow characteristics and intrinsic workability of IN718 superalloy
- (2015) Fei Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress
- (2015) Hamed Mirzadeh METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Manifestations in corrosion prophase of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solutions
- (2014) Jianhua Liu et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- A physically-based constitutive model for a typical nickel-based superalloy
- (2013) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Microstructure Characteristics of 30CrMnSiNi2A Steel After Ultrasound-Aided Deep Rolling
- (2012) Junfeng Xie et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The kinetics of dynamic recrystallization of 42CrMo steel
- (2012) Ming-Song Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The flow behavior modeling of cast A356 aluminum alloy at elevated temperatures considering the effect of strain
- (2011) N. Haghdadi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
- (2010) Y.C. Lin et al. MATERIALS & DESIGN
- A modified Johnson–Cook model for tensile behaviors of typical high-strength alloy steel
- (2010) Y.C. Lin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
- (2007) Y.C. Lin et al. COMPUTATIONAL MATERIALS SCIENCE
- Prediction of 42CrMo steel flow stress at high temperature and strain rate
- (2007) Y.C. Lin et al. MECHANICS RESEARCH COMMUNICATIONS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More