Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors

Effective elastic moduli of metal honeycombs manufactured using selective laser melting

(2020) Rafid Hussein et al.   RAPID PROTOTYPING JOURNAL

Compressive Properties of Bio-Inspired Reticulated Shell Structures Processed by Selective Laser Melting

(2019) Haoran Wang et al.   ADVANCED ENGINEERING MATERIALS

Estimation of strains in composite honeycomb sandwich panels subjected to low frequency diffused acoustic field

(2019) S. Kumar et al.   JOURNAL OF SOUND AND VIBRATION

Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure

(2019) Yangli Xu et al.   Journal of the Mechanical Behavior of Biomedical Materials

Compression behavior of the graded metallic auxetic reentrant honeycomb: Experiment and finite element analysis

(2019) Dengbao Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical properties and deformation behavior under compressive loading of selective laser melting processed bio-inspired sandwich structures

(2019) Kaiming Hu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Energy absorption of muscle-inspired hierarchical structure: Experimental investigation

(2019) H.H. Tsang et al.   COMPOSITE STRUCTURES

Twist-to-bend ratio: an important selective factor for many rod-shaped biological structures

(2019) Steve Wolff-Vorbeck et al.   Scientific Reports

Static and dynamic properties of pre-twisted leaves and stalks with varying chiral morphologies

(2019) Zi-Long Zhao et al.   Extreme Mechanics Letters

Acoustic characterization of additive manufactured perforated panel backed by honeycomb structure with circular and non-circular perforations

(2019) Deepak C. Akiwate et al.   APPLIED ACOUSTICS

Convective heat transfer enhancement by novel honeycomb-core in sandwich panel exchanger fabricated by additive manufacturing

(2019) Dekui Kong et al.   APPLIED THERMAL ENGINEERING

Consistent coupled optical and thermal analysis of volumetric solar receivers with honeycomb absorbers

(2019) Mahmoud Ali et al.   RENEWABLE ENERGY

Crashworthiness design of novel hierarchical hexagonal columns

(2018) Xiang Xu et al.   COMPOSITE STRUCTURES

Dynamic compressive response of additively manufactured AlSi10Mg alloy hierarchical honeycomb structures

(2018) Yuwu Zhang et al.   COMPOSITE STRUCTURES

Response of square honeycomb core sandwich panels to granular matter impact

(2018) Anne Kyner et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

On hierarchical honeycombs under out-of-plane crushing

(2018) Jianguang Fang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Mechanical properties of spider-web hierarchical honeycombs subjected to out-of-plane impact loading

(2018) Qiang He et al.   JOURNAL OF SANDWICH STRUCTURES & MATERIALS

Kagome–Honeycomb structure produced using a wave laser in a conventional superconductor

(2018) J. Sebastián León et al.   OPTIK

Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections

(2018) Linwei Zhang et al.   THIN-WALLED STRUCTURES

Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting

(2018) Beibei He et al.   VACUUM

Effect of phenolic resin thickness on frequency-dependent dynamic mechanical properties of Nomex honeycomb cores

(2018) Yong Zhou et al.   COMPOSITES PART B-ENGINEERING

Additive manufacturing of Ti6Al4V alloy: A review

(2018) Shunyu Liu et al.   MATERIALS & DESIGN

Smooth-shell metamaterials of cubic symmetry: Anisotropic elasticity, yield strength and specific energy absorption

(2018) Colin Bonatti et al.   ACTA MATERIALIA

Influence of laser parameters and complex structural features on the bio-inspired complex thin-wall structures fabricated by selective laser melting

(2018) Kaijie Lin et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Influence of internal pressure on the out-of-plane dynamic behavior of circular-celled honeycombs

(2017) L.L. Hu et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting

(2017) Hongyu Chen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density

(2017) Jie Han et al.   RAPID PROTOTYPING JOURNAL

Directional mechanical properties and wave propagation directionality of Kagome honeycomb structures

(2016) Bin Niu et al.   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS

A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo

(2016) Meng Zou et al.   THIN-WALLED STRUCTURES

Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting

(2016) Jingjing Yang et al.   MATERIALS & DESIGN

Structural Design Elements in Biological Materials: Application to Bioinspiration

(2015) Steven E. Naleway et al.   ADVANCED MATERIALS

Dynamic crushing of the circular-celled honeycombs under out-of-plane impact

(2015) L.L. Hu et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Multiobjective optimization and sensitivity analysis of honeycomb sandwich cylindrical columns under axial crushing loads

(2015) Saeed Ebrahimi et al.   THIN-WALLED STRUCTURES

Thermo-mechanical response of superalloy honeycomb sandwich panels subjected to non-steady thermal loading

(2015) Bing Pan et al.   MATERIALS & DESIGN

Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores

(2014) J. Xiong et al.   COMPOSITE STRUCTURES

Experimental study on the low velocity impact responses of all-composite pyramidal truss core sandwich panel after high temperature exposure

(2014) Jiayi Liu et al.   COMPOSITE STRUCTURES

Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting

(2014) F. Calignano   MATERIALS & DESIGN

In plane stiffness of multifunctional hierarchical honeycombs with negative Poisson’s ratio sub-structures

(2013) Yongtao Sun et al.   COMPOSITE STRUCTURES

The mechanical properties of natural fibre based honeycomb core materials

(2013) M.Y.M. Zuhri et al.   COMPOSITES PART B-ENGINEERING

Accuracy of medical models made by additive manufacturing (rapid manufacturing)

(2013) Mika Salmi et al.   JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY

Structural Biological Materials: Critical Mechanics-Materials Connections

(2013) M. A. Meyers et al.   SCIENCE

Energy absorption of multi-cell stub columns under axial compression

(2013) Xiong Zhang et al.   THIN-WALLED STRUCTURES

3D imaging and mechanical modeling of helical buckling in Medicago truncatula plant roots

(2012) J. L. Silverberg et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

A theoretical and experimental study on metal hexagonal honeycomb crushing under quasi-static and low velocity impact loading

(2011) M. Zarei Mahmoudabadi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mean out-of-plane dynamic plateau stresses of hexagonal honeycomb cores under impact loadings

(2010) Sun Deqiang et al.   COMPOSITE STRUCTURES

Honeycomb cores with enhanced buckling strength

(2010) W. Miller et al.   COMPOSITE STRUCTURES

Dynamic crushing strength of hexagonal honeycombs

(2009) L.L. Hu et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Static Analysis of Sandwich Panels with Square Honeycomb Core

(2008) R. K. Kapania et al.   AIAA JOURNAL