Evolution of texture, microstructure, tensile strength and corrosion properties of annealed Al–Mg–Sc–Zr alloys

Effect of annealing temperature on microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn-Sc-Zr alloy

(2020) Zhongqin Tang et al.   APPLIED SURFACE SCIENCE

Dynamic dissolution and texture evolution of an Al–Cu–Mg–Ag alloy during hot rolling

(2020) Fei Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Evolution of microstructure, texture, and mechanical properties in a twin-roll cast AA6016 sheet after asymmetric rolling with various velocity ratios between top and bottom rolls

(2020) Xianwei Ren et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Revealing the evolution of microstructure, mechanical property and corrosion behavior of 7A46 aluminum alloy with different ageing treatment

(2019) Yaru Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Investigation of the stress corrosion cracking behavior in annealed 5083 aluminum alloy sheets with different texture types

(2019) Zhi Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Optimizing the microstructure and mechanical properties of a cold-rolled Al–Mg–Li alloy via electropulsing assisted recrystallization annealing and ageing

(2019) Han Xiao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Modeling of dynamic recrystallization of magnesium alloy using cellular automata considering initial topology of grains

(2018) Lixiao Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation of coherent, core-shelled nano-particles in dilute Al-Sc-Zr alloys from the first-principles

(2018) Chaomin Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Deformation structures and strengthening mechanisms in an Al Mg Sc Zr alloy

(2017) S. Malopheyev et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High strain rate superplasticity in an Al–Mg–Sc–Zr alloy processed via simple rolling

(2017) Mengjia Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys

(2016) J. Taendl et al.   ACTA MATERIALIA

On exfoliation corrosion of alloy 2060 T8E30 in an aggressive acid environment

(2016) Ahmad Ivan Karayan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion

(2016) Han-Joo Lee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation hardening and recrystallization behavior of Al Mg Er Zr alloys

(2016) S.P. Wen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A coupled EBSD/TEM study of the microstructural evolution of multi-axial compressed pure Al and Al–Mg alloy

(2016) Xiaohui Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Semi-quantitative evaluation of texture components and anisotropy of the yield strength in 2524 T3 alloy sheets

(2016) Fanghua Shen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of aging time on precipitation behavior, mechanical and corrosion properties of a novel Al-Zn-Mg-Sc-Zr alloy

(2016) Bo LI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries

(2016) Jianfeng Yan et al.   Scientific Reports

Corrosion inhibition of biomimetic super-hydrophobic electrodeposition coatings on copper substrate

(2015) Yan Liu et al.   CORROSION SCIENCE

Effect of minor Sc on microstructure and mechanical properties of Al–Zn–Mg–Zr alloy metal–inert gas welds

(2015) Xing Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Correlative characterization of primary Al3(Sc,Zr) phase in an Al–Zn–Mg based alloy

(2015) J.H. Li et al.   MATERIALS CHARACTERIZATION

Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys

(2014) Shiteng Zhao et al.   ACTA MATERIALIA

Corrosion protection of 304L stainless steel by chemical vapor deposited alumina coatings

(2014) Ana-Maria Lazar et al.   CORROSION SCIENCE

Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys

(2014) J. H. Li et al.   JOURNAL OF MATERIALS SCIENCE

Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications

(2013) J. Hirsch et al.   ACTA MATERIALIA

Microstructure strengthening mechanisms in an Al–Mg–Si–Sc–Zr equal channel angular pressed aluminium alloy

(2013) Marcello Cabibbo   APPLIED SURFACE SCIENCE

Recrystallization of Al-5.8Mg-Mn-Sc-Zr alloy

(2013) Ying WANG et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Stress corrosion cracking susceptibility of ultrafine grained Al–Mg–Sc alloy

(2012) G.R. Argade et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of scandium addition on microstructure and mechanical properties of ZK60 alloy

(2012) Fu-sheng PAN et al.   Progress in Natural Science-Materials International

Investigation of primary Al3(Sc,Zr) particles in Al–Sc–Zr alloys

(2010) M. Song et al.   MATERIALS SCIENCE AND TECHNOLOGY

Effect of thermomechanical treatment on the corrosion of AA5083

(2009) L. Tan et al.   CORROSION SCIENCE

Effects of minor Sc on the microstructure and mechanical properties of Al-Zn-Mg-Cu-Zr based alloys

(2009) Wenbin Li et al.   RARE METALS