Microstructure, mechanical properties and corrosion resistance of A356 aluminum/AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Microstructure, mechanical properties and corrosion resistance of A356 aluminum/AZ91D magnesium bimetal prepared by a compound casting combined with a novel Ni-Cu composite interlayer
Authors
Keywords
A356/AZ91D bimetal, Ni-Cu composite interlayer, Compound casting, Microstructure, Mechanical properties, Corrosion resistance
Journal
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume 288, Issue -, Pages 116874
Publisher
Elsevier BV
Online
2020-08-09
DOI
10.1016/j.jmatprotec.2020.116874
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Effect of different Ni interlayers on interfacial microstructure and bonding properties of Al/Mg bimetal using a novel compound casting
- (2020) Guangyu Li et al. Journal of Manufacturing Processes
- The Effect of a Zinc Interlayer on the Microstructure and Mechanical Properties of a Magnesium Alloy (AZ31)–Aluminum Alloy (6060) Joint Produced by Liquid–Solid Compound Casting
- (2019) Renata Mola et al. JOM
- Effects of Zn on intermetallic compounds and strength of Al/Mg joints ultrasonically soldered in air
- (2019) Zhiwu Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Interfacial microstructures and mechanical properties of Mg/Al bimetal produced by a novel liquid-liquid compound casting process
- (2018) Zailiang Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of heat treatment on bonding strength of aluminum/steel bimetal produced by a compound casting
- (2018) Wenming Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dissimilar friction stir lap welding of magnesium to aluminum using plasma electrolytic oxidation interlayer
- (2018) Y. Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Ni Interlayer on Microstructure and Mechanical Properties of Mg/Al Bimetallic Castings
- (2018) Ning Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al
- (2018) Zhiwu Xu et al. ULTRASONICS SONOCHEMISTRY
- Removing the oxide layer on the A380 substrate of AM60/A380 bimetallic castings by the zincate process followed with galvanizing
- (2018) Hui Zhang et al. VACUUM
- In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy
- (2018) A. Abdollahzadeh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- New Insights into the Characterization and Formation of the Interface of A356/AZ91D Bimetallic Composites Fabricated by Compound Casting
- (2018) Guangyu Li et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ultrasonic semi-solid soldering 6061 aluminum alloys joint with Sn-9Zn solder reinforced with nano/nano+micron Al2O3 particles
- (2018) Ding Min ULTRASONICS SONOCHEMISTRY
- The role of vacuum degree in the bonding of Al/Mg bimetal prepared by a compound casting process
- (2018) Guangyu Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: Novel beam-wobbling technique, processing parameters, and metallurgical characterization
- (2018) F. Khodabakhshi et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and mechanical properties of the heat-affected zone in laser-welded/brazed steel 22MnB5–AA6016 aluminum/AZ31 magnesium alloy
- (2017) M. Windmann et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of heat treatment and initial thickness ratio on spin bonding of 3A21/5A03 composite tube
- (2017) Wenchen Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Contact-reaction brazing of an AZ31 magnesium/3003 aluminum alloy using a silver-copper-zinc interlayer
- (2017) Tuoyu Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication and microstructure evolution of Al/Mg bimetal using a near-net forming process
- (2017) Suo Fan et al. MATERIALS AND MANUFACTURING PROCESSES
- The significance of intermetallic compounds formed during interdiffusion in aluminum and magnesium dissimilar welds
- (2017) Yin Wang et al. MATERIALS CHARACTERIZATION
- Compressive mechanical behavior of Al/Mg composite rods with different types of Al sleeve
- (2016) Bo Feng et al. ACTA MATERIALIA
- Interface formation in magnesium/aluminium bimetallic castings with a nickel interlayer
- (2016) Hui Zhang et al. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Investigation on the Interface Characteristics of Al/Mg Bimetallic Castings Processed by Lost Foam Casting
- (2016) Wenming Jiang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Investigation on microstructures and properties of arc-sprayed-Al/AZ91D bimetallic material by solid–liquid compound casting
- (2016) Ke He et al. MATERIALS & DESIGN
- Improvement of interfacial bonding strength in roll-bonded Mg/Al clad sheets through annealing and secondary rolling process
- (2015) Jung-Su Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Mg/Al butt joints welded by gas tungsten arc filling with Zn–29.5Al–0.5Ti filler metal
- (2014) Fei Liu et al. MATERIALS CHARACTERIZATION
- Comparison between conventional and lost foam compound casting of Al/Mg light metals
- (2013) S M Emami et al. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
- Interfacial phenomena in magnesium/aluminum bi-metallic castings
- (2013) Guangchen Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg–Al joints
- (2012) Yiyu Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Al thin film and Ni foil interlayer on diffusion bonded Mg–Al dissimilar joints
- (2012) Jian Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure Characteristics and Mechanical Properties of Al 413/Mg Joint in Compound Casting Process
- (2012) E. Hajjari et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer
- (2012) Ming Gao et al. SCRIPTA MATERIALIA
- Microstructure characteristics and mechanical properties of cold metal transfer welding Mg/Al dissimilar metals
- (2011) Jing Shang et al. MATERIALS & DESIGN
- Fusion welding of Fe-added lap joints between AZ31B magnesium alloy and 6061 aluminum alloy by hybrid laser–tungsten inert gas welding technique
- (2011) Xiao-dong Qi et al. MATERIALS & DESIGN
- Optimising diffusion bonding parameters to maximize the strength of AA6061 aluminium and AZ31B magnesium alloy joints
- (2011) M. Joseph Fernandus et al. MATERIALS & DESIGN
- Interfacial microstructure, bonding strength and fracture of magnesium–aluminum laminated composite plates fabricated by direct hot pressing
- (2011) Bo Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental study and thermodynamic remodeling of the Bi–Cu–Ni system
- (2010) Branislav Marković et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Developing a new 2D model for heat transfer and foam degradation in EPS lost foam casting (LFC) process
- (2010) J. Shayegh et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Determination of mechanical properties of Al–Mg alloys dissimilar friction stir welded interface by indentation methods
- (2009) P. Venkateswaran et al. JOURNAL OF MATERIALS SCIENCE
- Microstructure and properties of magnesium AZ31B–aluminum 7075 explosively welded composite plate
- (2009) Y.B. Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanomechanics of Mg–Al intermetallic compounds
- (2009) M.-X. Zhang et al. SURFACE & COATINGS TECHNOLOGY
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started