Evolution of subsequent yield surfaces with plastic deformation along proportional and non-proportional loading paths on annealed AA6061 alloy: Experiments and crystal plasticity finite element modeling

A multi-GPU implementation of a full-field crystal plasticity solver for efficient modeling of high-resolution microstructures

(2020) Adnan Eghtesad et al.   COMPUTER PHYSICS COMMUNICATIONS

Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling

(2020) Angela Y. Ku et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A new crystal plasticity constitutive model for simulating precipitation-hardenable aluminum alloys

(2020) Y. Larry Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Characterization of yield stress surface and strain-rate potential for tubular materials using multiaxial tube expansion test method

(2020) Sobhan Alah Nazari Tiji et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Bending induced wrinkling and creasing in axially crushed aluminum tubes

(2020) Jake A. Haley et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Modelling and simulation of ductile failure in textured aluminium alloys subjected to compression-tension loading

(2019) Bjørn Håkon Frodal et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Material Response, Localization and Failure of an Aluminum Alloy Under Combined Shear and Tension: Part II Analysis

(2019) Kelin Chen et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Material Response, Localization, and Failure of an Aluminum Alloy Under Combined Shear and Tension: Part I Experiments

(2019) Martin Scales et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Materials for Automotive Lightweighting

(2019) Alan Taub et al.   Annual Review of Materials Research

A computational mechanics engineering framework for predicting the axial crush response of Aluminum extrusions

(2019) Christopher P. Kohar et al.   THIN-WALLED STRUCTURES

Development of the post-form strength prediction model for a high-strength 6xxx aluminium alloy with pre-existing precipitates and residual dislocations

(2019) Qunli Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Using spectral-based representative volume element crystal plasticity simulations to predict yield surface evolution during large scale forming simulations

(2019) Fengbo Han et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Predicting shear fracture of aluminum 6016-T4 during deep drawing: Combining Yld-2000 plasticity with Hosford–Coulomb fracture model

(2018) Maysam B. Gorji et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Calibration of Barlat Yld2004-18P yield function using CPFEM and 3D RVE for the simulation of single point incremental forming (SPIF) of 7075-O aluminum sheet

(2018) Rasoul Esmaeilpour et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion

(2018) Yanshan Lou et al.   INTERNATIONAL JOURNAL OF PLASTICITY

The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085

(2018) J.J. Bhattacharyya et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets

(2018) Milovan Zecevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Experimental characterization and modeling of aluminum alloy AA3103 for complex single and double strain-path changes

(2018) Jisheng Qin et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Comparison of 3D yield functions for finite element simulation of single point incremental forming (SPIF) of aluminum 7075

(2017) Rasoul Esmaeilpour et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

A new multi-scale framework to incorporate microstructure evolution in phenomenological plasticity: Theory, explicit finite element formulation, implementation and validation

(2017) Christopher P. Kohar et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation

(2017) Toshihiko Kuwabara et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Experimental and numerical investigation of texture evolution and the effects of intragranular backstresses in aluminum alloys subjected to large strain cyclic deformation

(2017) Waqas Muhammad et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effects of coupling anisotropic yield functions with the optimization process of extruded aluminum front rail geometries in crashworthiness

(2017) Christopher P. Kohar et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Texture, Microstructure and Mechanical Properties of 6111 Aluminum Alloy Subject to Rolling Deformation

(2017) Lixin Zhang et al.   Materials Research-Ibero-american Journal of Materials

Development of high crush efficient, extrudable aluminium front rails for vehicle lightweighting

(2016) Christopher P. Kohar et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements

(2016) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations

(2016) Haiming Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy

(2016) M. Khadyko et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Ductile failure of aluminum alloy tubes under combined torsion and tension

(2016) Martin Scales et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

The effects of the yield surface curvature and anisotropy constants on the axial crush response of circular crush tubes

(2016) Christopher P. Kohar et al.   THIN-WALLED STRUCTURES

Cyclic behaviour of a 6061 aluminium alloy: Coupling precipitation and elastoplastic modelling

(2015) D. Bardel et al.   ACTA MATERIALIA

Strain-path change induced transients in flow stress, work hardening and r-values in aluminum

(2015) Tomáš Mánik et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Anisotropy of thin-walled tubes by a new method of combined tension and shear loading

(2015) Christopher P. Dick et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Multi-level modelling of mechanical anisotropy of commercial pure aluminium plate: Crystal plasticity models, advanced yield functions and parameter identification

(2015) K. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications

(2013) J. Hirsch et al.   ACTA MATERIALIA

A user-friendly 3D yield function to describe anisotropy of steel sheets

(2013) Fusahito Yoshida et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths

(2013) Kengo Yoshida et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Ductile failure under combined shear and tension

(2013) S.S. Haltom et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys

(2013) Hao Zhong et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A strain rate dependent anisotropic hardening model and its validation through deep drawing experiments

(2013) Philip Peters et al.   International Journal of Material Forming

Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part I: Plasticity

(2012) Matthieu Dunand et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels

(2012) K. Kitayama et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Crystal plasticity modeling of texture evolution and heterogeneity in equal channel angular pressing of aluminum single crystal

(2011) C. Lu et al.   ACTA MATERIALIA

An elasto-plastic damage constitutive theory and its prediction of evolution of subsequent yield surfaces and elastic constants

(2011) Fang Liu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements

(2011) Javier Segurado et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effects of crystal orientation on bendability of aluminum alloy sheet

(2011) Shingo Ikawa et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: Effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear

(2010) J. Rossiter et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Modelling of localised thinning features in the hydroforming of micro-tubes using the crystal-plasticity FE method

(2009) W. Zhuang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part-I: A very low work hardening aluminum alloy (Al6061-T6511)

(2009) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part II: A very high work hardening aluminum alloy (annealed 1100 Al)

(2009) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY