Enhanced dynamic mechanical properties and resistance to the formation of adiabatic shear band by Cu-rich nano-precipitates in high-strength steels

Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel

(2020) S.S. Xu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling

(2020) Angela Y. Ku et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Precipitation kinetics and mechanical properties of nanostructured steels with Mo additions

(2020) S. S. Xu et al.   Materials Research Letters

Homogeneous elasto-plastic deformation and improved strain compatibility between austenite and ferrite in a co-precipitation hardened medium Mn steel with enhanced hydrogen embrittlement resistance

(2020) Yu Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

The effects of carbon on the phase stability and mechanical properties of heat-treated FeNiMnCrAl high entropy alloys

(2019) Margaret Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of impurities on adiabatic shear bands (ASB) formation and evolution in U-2.5 wt%Nb alloy under impact

(2019) Dawu Xiao et al.   JOURNAL OF NUCLEAR MATERIALS

Impact property of high-strength 316L stainless steel with heterostructures

(2019) Jiansheng Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain hardenability of a gradient metallic alloy under high-strain-rate compressive loading

(2019) Jitang Fan et al.   MATERIALS & DESIGN

Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

(2019) Bharat Gwalani et al.   Scientific Reports

Dynamic mechanical properties and machinability characteristics of selective laser melted and forged Ti6Al4V

(2019) Weiwei Ming et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Strain rate sensitivity and activation volume of AISI 321 stainless steel under dynamic impact loading: Grain size effect

(2019) A.A. Tiamiyu et al.   MATERIALS CHARACTERIZATION

The yielding, deformation and fracture behavior for the Widmanstätten structure of Ti–8Al–1Mo–1V alloy upon high speed impact

(2019) X.H. Shi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High strength and high ductility in a novel Fe40.2Ni11.3Mn30Al7.5Cr11 multiphase high entropy alloy

(2019) Margaret Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates

(2018) L. Sun et al.   ACTA MATERIALIA

Microstructural evolution of a nanotwinned steel under extremely high-strain-rate deformation

(2018) P. Zhou et al.   ACTA MATERIALIA

Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics

(2018) T. Maity et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Adiabatic shear banding and the micromechanics of plastic flow in metals

(2018) B. Gurrutxaga-Lerma   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Microstructural dependence of strain rate sensitivity in thermomechanically processed Al 0.1 CoCrFeNi high entropy alloy

(2018) Sindhura Gangireddy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting

(2018) Xiaodong Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: Effects of grain size and strain rate

(2018) A.A. Tiamiyu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Respective/combined roles of thermal softening and dynamic recrystallization in adiabatic shear banding initiation

(2018) Patrice Longère   MECHANICS OF MATERIALS

High-strain-rate plastic deformation and fracture behaviour of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy at room temperature

(2018) Chun Ran et al.   MECHANICS OF MATERIALS

Dynamic recrystallization in adiabatic shear banding: Effective-temperature model and comparison to experiments in ultrafine-grained titanium

(2018) Charles K.C. Lieou et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel

(2018) S.S. Xu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dynamic mechanical properties and adiabatic shearing behavior of the shock prestrained Ti–6Al–4V alloy having bimodal microstructure

(2018) Yu Ren et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A review on split Hopkinson bar experiments on the dynamic characterisation of concrete

(2018) Mohammad Reza Khosravani et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical property and microstructure evolution of aged 6063 aluminum alloy under high strain rate deformation

(2018) Tuo Ye et al.   VACUUM

Compressive deformation behavior and microstructure evolution of AM80 magnesium alloy under quasi-static and dynamic loading

(2017) Pengcheng Guo et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Investigation of the shear response and geometrically necessary dislocation densities in shear localization in high-purity titanium

(2017) Chaoyi Zhu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Enhancement of low temperature toughness of nanoprecipitates strengthened ferritic steel by delamination structure

(2017) Yu Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Adiabatic shear behaviors in rolled and annealed pure titanium subjected to dynamic impact loading

(2017) Lianjun Kuang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Co-precipitation of nanoscale particles in steels with ultra-high strength for a new era

(2017) Z.B. Jiao et al.   Materials Today

High dislocation density–induced large ductility in deformed and partitioned steels

(2017) B. B. He et al.   SCIENCE

Atom-probe study of Cu and NiAl nanoscale precipitation and interfacial segregation in a nanoparticle-strengthened steel

(2017) Z. B. Jiao et al.   Materials Research Letters

Adiabatic shear localization in ultrafine grained 6061 aluminum alloy

(2016) Bingfeng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi2 high-entropy alloy

(2016) S.G. Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tailoring nanostructures and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy using thermo-mechanical processing

(2016) I.S. Wani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation of adiabatic shear band and deformation mechanisms during warm compression of Ti–6Al–4V alloy

(2016) Jiao Luo et al.   RARE METALS

Adiabatic shear localization in nanostructured face centered cubic metals under uniaxial compression

(2016) Jianguo Li et al.   MATERIALS & DESIGN

The genesis of adiabatic shear bands

(2016) P. Landau et al.   Scientific Reports

Evolution of θ′ precipitate in aluminum alloy 2519A impacted by split Hopkinson bar

(2015) Sun Da-xiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Brittle intermetallic compound makes ultrastrong low-density steel with large ductility

(2015) Sang-Heon Kim et al.   NATURE

Duplex Precipitates and Their Effects on the Room-temperature Fracture Behaviour of a NiAl-Strengthened Ferritic Alloy

(2015) Zhiqian Sun et al.   Materials Research Letters

Aging characteristics and mechanical properties of 1600MPa body-centered cubic Cu and B2-NiAl precipitation-strengthened ferritic steel

(2014) Monica Kapoor et al.   ACTA MATERIALIA

Effects of dynamic mechanical properties on the ballistic performance of a new near-β titanium alloy Ti684

(2014) Rongting Li et al.   MATERIALS & DESIGN

Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact

(2014) Solomon Boakye Yiadom et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution in adiabatic shear band in the ultrafine-grained austenitic stainless steel processed by multi-axial compression

(2014) Bingfeng Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The dynamic response of a β titanium alloy to high strain rates and elevated temperatures

(2014) Hongyi Zhan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys

(2013) Y.R. Wen et al.   ACTA MATERIALIA

Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy

(2013) Y.R. Wen et al.   ACTA MATERIALIA

Experimental study on high strain rate behavior of high strength 600–1000MPa dual phase steels and 1200MPa fully martensitic steels

(2013) Wurong Wang et al.   MATERIALS & DESIGN

Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading

(2013) Jingui Qin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Adiabatic shear failure of aluminum matrix composites and microstructural characteristics of transformed bands

(2013) Dezhi Zhu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dynamic properties evaluation of 2519A aluminum alloy processed by interrupted aging

(2013) Lingying Ye et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization of adiabatic shear bands in the zirconium alloy impacted by split Hopkinson pressure bar at a strain rate of 6000s−1

(2012) D.L. Zou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The heat treatment effect on microstructure and dynamic mechanical properties of electroformed nanocrystalline Ni–W alloy

(2012) Y.C. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Critique of mechanisms of formation of deformation, annealing and growth twins: Face-centered cubic metals and alloys

(2012) S. Mahajan   SCRIPTA MATERIALIA

Localized amorphism after high-strain-rate deformation in TWIP steel

(2011) N. Li et al.   ACTA MATERIALIA

Compressive deformation behavior of a near-beta titanium alloy

(2011) Wei Qian Song et al.   MATERIALS & DESIGN

Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact

(2011) D.L. Zou et al.   MATERIALS CHARACTERIZATION

Influence of Aging and Thermomechanical Treatments on the Mechanical Properties of a Nanocluster-Strengthened Ferritic Steel

(2011) Z. W. Zhang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy

(2010) D.H. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Shear Localization in Dynamic Deformation: Microstructural Evolution

(2008) Yongbo Xu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Influence of strain rate on the precipitate microstructure in impacted aluminum alloy

(2008) Zhiguo Gao et al.   SCRIPTA MATERIALIA