Multiscale constitutive modeling of additively manufactured Al-Si-Mg alloys based on measured phase stresses and dislocation density

Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy

(2021) X.X. Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A Tailored AlSiMg Alloy for Laser Powder Bed Fusion

(2020) Daniel Knoop et al.   Metals

Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy

(2020) Qingge Xie et al.   ACTA MATERIALIA

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

(2020) Ruidi Li et al.   ACTA MATERIALIA

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

(2020) K.M. Bertsch et al.   ACTA MATERIALIA

Strain-rate dependent material properties of selective laser melted AlSi10Mg and AlSi3.5Mg2.5

(2020) Andreas Lutz et al.   Materials Testing

Metal additive manufacturing: Technology, metallurgy and modelling

(2020) Shaun Cooke et al.   Journal of Manufacturing Processes

Quantifying internal strains, stresses, and dislocation density in additively manufactured AlSi10Mg during loading-unloading-reloading deformation

(2020) X.X. Zhang et al.   MATERIALS & DESIGN

A comparative study on single-laser and multi-laser selective laser melting AlSi10Mg: defects, microstructure and mechanical properties

(2019) Changchun Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures

(2019) Gábor Ribárik et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured Cu-Nb composite wires and comparison with neutron diffraction experiments

(2019) T. Gu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

New insight for mechanical properties of metals processed by severe plastic deformation

(2019) Peng Wang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations

(2019) Reeju Pokharel et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

(2019) Panding Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting

(2019) Nesma T. Aboulkhair et al.   PROGRESS IN MATERIALS SCIENCE

Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting

(2019) J. Delahaye et al.   ACTA MATERIALIA

Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures

(2019) Saeede Ghorbanpour et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models

(2019) Przemysław Kot et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Polycrystal plasticity modeling for load reversals in commercially pure titanium

(2019) Jiaxiang Wang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal

(2019) Jeremy H. Rao et al.   MATERIALS & DESIGN

Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys

(2019) Zan Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Evolution of dislocation density in bainitic steel: Modeling and experiments

(2018) S.H. He et al.   ACTA MATERIALIA

In situ synchrotron X-ray diffraction investigations of the physical mechanism of ultra-low strain hardening in Ti-30Zr-10Nb alloy

(2018) Z.W. Zhu et al.   ACTA MATERIALIA

Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength

(2018) S. Romano et al.   ENGINEERING FRACTURE MECHANICS

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

(2018) Jinliang Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions

(2018) Amir Hadadzadeh et al.   MATERIALS & DESIGN

Elasto-plastic deformation in Al-Cu cast alloys for engine components

(2018) M. Schöbel et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Kocks-Mecking analysis of the size effects on the mechanical behavior of nickel polycrystals

(2017) C. Keller et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM

(2017) Dong-Kyu Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel

(2017) Pradipta Ghosh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Observations of the stress developed in Si inclusions following plastic flow in the matrix of an Al–Si–Mg alloy

(2017) Cameron J. Davidson et al.   PHILOSOPHICAL MAGAZINE

Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction

(2017) Stefanus Harjo et al.   Scientific Reports

Microstructure and strength of selectively laser melted AlSi10Mg

(2016) J. Wu et al.   ACTA MATERIALIA

Controlling strength and ductility: Dislocation-based model of necking instability and its verification for ultrafine grain 316L steel

(2016) A. Vinogradov et al.   ACTA MATERIALIA

Evolution of dislocations and twins in a strong and ductile nanotwinned steel

(2016) P. Zhou et al.   ACTA MATERIALIA

In-situ neutron diffraction during biaxial deformation

(2016) S. Van Petegem et al.   ACTA MATERIALIA

Failure of metals I: Brittle and ductile fracture

(2016) A. Pineau et al.   ACTA MATERIALIA

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

The α -factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density

(2016) Haël Mughrabi   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model

(2016) A. Baczmański et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy

(2016) Milan Ardeljan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Composite Behavior of Lath Martensite Steels Induced by Plastic Strain, a New Paradigm for the Elastic-Plastic Response of Martensitic Steels

(2016) Tamás Ungár et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel

(2015) Z.Y. Liang et al.   ACTA MATERIALIA

Strain rate effect of high purity aluminum single crystals: Experiments and simulations

(2015) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Applicability of Voce equation for tensile flow and work hardening behaviour of P92 ferritic steel

(2015) G. Sainath et al.   INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING

Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load

(2015) Z.Y. Zhong et al.   MATERIALS CHARACTERIZATION

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

(2015) E.O. Olakanmi et al.   PROGRESS IN MATERIALS SCIENCE

Microstresses and crack formation in AlSi7MgCu and AlSi17Cu4 alloys for engine components

(2014) M. Schöbel et al.   ACTA MATERIALIA

Effects of alloying elements on elastic properties of Al by first-principles calculations

(2014) J. Wang et al.   Journal of Mining and Metallurgy Section B-Metallurgy

Review of the Taylor ambiguity and the relationship between rate-independent and rate-dependent full-constraints Taylor models

(2013) Tomáš Mánik et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A model for calculating diffraction elastic constants

(2012) Thomas Gnäupel-Herold et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

ISODEC: software for calculating diffraction elastic constants

(2012) Thomas Gnäupel-Herold   JOURNAL OF APPLIED CRYSTALLOGRAPHY

In situ room temperature tensile deformation of a 1% CrMoV bainitic steel using synchrotron and neutron diffraction

(2011) M.A. Weisser et al.   ACTA MATERIALIA

Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals

(2011) M. Sauzay et al.   PROGRESS IN MATERIALS SCIENCE

The evolution of crack-tip stresses during a fatigue overload event

(2010) A. Steuwer et al.   ACTA MATERIALIA

In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures

(2008) O. Muránsky et al.   ACTA MATERIALIA

Rietveld analysis software for J-PARC

(2008) R. Oishi et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT