Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
Authors
Keywords
Selective laser melting, AlSi10Mg, VHCF, Defects, Crack initiation
Journal
INTERNATIONAL JOURNAL OF FATIGUE
Volume 143, Issue -, Pages 106013
Publisher
Elsevier BV
Online
2020-10-27
DOI
10.1016/j.ijfatigue.2020.106013
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures
- (2020) Y.N. Hu et al. MATERIALS & DESIGN
- Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress
- (2020) Guian Qian et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
- (2019) Srinivasa Rakesh Ch et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In situ detection of thermally induced porosity in additively manufactured and sintered objects
- (2019) Einat Strumza et al. JOURNAL OF MATERIALS SCIENCE
- Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting
- (2019) Quanquan Han et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- In-situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature
- (2019) Zhen Wang et al. ENGINEERING FRACTURE MECHANICS
- High-cycle and very-high-cycle fatigue behaviour of a titanium alloy with equiaxed microstructure under different mean stresses
- (2019) Xiangnan Pan et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing
- (2019) Bastien Vayssette et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
- (2019) Andrea Tridello et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Effects of hot isostatic pressing and internal porosity on the performance of selective laser melted AlSi10Mg alloys
- (2019) Tomotake Hirata et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting
- (2019) Guian Qian et al. INTERNATIONAL JOURNAL OF FATIGUE
- A review about the effects of structural and operational factors on the gigacycle fatigue of steels
- (2018) D. Jeddi et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume
- (2018) A. Tridello et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Notched fatigue testing of Inconel 718 prepared by selective laser melting
- (2018) D.B. Witkin et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)
- (2018) Victor Chastand et al. MATERIALS CHARACTERIZATION
- Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V
- (2018) J. Dzugan et al. MATERIALS CHARACTERIZATION
- A novel hybrid selective laser melting/hot isostatic pressing of near-net shaped Ti-6Al-4V alloy using an in-situ tooling: Interfacial microstructure evolution and enhanced mechanical properties
- (2018) Chao Cai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ investigation of the anisotropic mechanical properties of laser direct metal deposition Ti6Al4V alloy
- (2018) Junxia Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
- (2018) S. Romano et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue properties and material characteristics of additively manufactured AlSi10Mg – Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties
- (2018) Emilie Beevers et al. INTERNATIONAL JOURNAL OF FATIGUE
- Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy
- (2018) Z.H. Xiong et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting
- (2017) K.F. Walker et al. INTERNATIONAL JOURNAL OF FATIGUE
- Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
- (2017) S. Bagehorn et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
- (2017) S. Beretta et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive Manufacturing of Metallic Materials: A Review
- (2017) Yi Zhang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
- (2017) I. Rosenthal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- S-N curves in the very-high-cycle fatigue regime: statistical modeling based on the hydrogen embrittlement consideration
- (2016) D. S. Paolino et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels
- (2016) Youshi Hong et al. INTERNATIONAL JOURNAL OF FATIGUE
- Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
- (2016) Nesma T. Aboulkhair et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
- (2016) U. Tradowsky et al. MATERIALS & DESIGN
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- A physically based universal functional to characterize the mechanism of fatigue crack growth in materials
- (2015) K.S. Ravi Chandran SCRIPTA MATERIALIA
- Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels
- (2013) Youshi Hong et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- A unified statistical model for S-N fatigue curves: probabilistic definition
- (2012) D. S. PAOLINO et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Material defects as the basis of fatigue design
- (2012) Yukitaka Murakami INTERNATIONAL JOURNAL OF FATIGUE
- Prediction of threshold value for FGA formation
- (2011) Aiguo Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental and theoretical investigation of environmental media on very-high-cycle fatigue behavior for a structural steel
- (2010) Guian Qian et al. ACTA MATERIALIA
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started