Numerical simulation of ash deposition behavior with a novel erosion model using dynamic mesh

Dynamic simulation on ash deposition and heat transfer behavior on a staggered tube bundle under high-temperature conditions

(2019) Zhimin Zheng et al.   ENERGY

Dynamic evolution of impaction and sticking behaviors of fly ash particle in pulverized coal combustion

(2018) Qian Huang et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Prediction of particle sticking efficiency for fly ash deposition at high temperatures

(2018) Xin Yang et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior

(2018) Ulrich Kleinhans et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Large-eddy simulation of ash deposition in a large-scale laboratory furnace

(2018) Min-min Zhou et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

A comparison of turbulence models and two and three dimensional meshes for unsteady CFD ash deposition tools

(2018) Manuel García Pérez et al.   FUEL

Numerical Investigation on Development of Initial Ash Deposition Layer for a High-Alkali Coal

(2017) Chao Liu et al.   ENERGY & FUELS

Understanding the ash deposition formation in Zhundong lignite combustion through dynamic CFD modelling analysis

(2017) Xin Yang et al.   FUEL

Ash particle sticking and rebound behavior: A mechanistic explanation and modeling approach

(2017) Ulrich Kleinhans et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Predicting ash deposition behaviour for co-combustion of palm kernel with coal based on CFD modelling of particle impaction and sticking

(2016) Xin Yang et al.   FUEL

Unsteady CFD analysis of kraft recovery boiler fly-ash trajectories, sticking efficiencies and deposition rates with a mechanistic particle rebound-stick model

(2016) Manuel García Pérez et al.   FUEL

Measurements and CFD modeling of a pulverized coal flame with emphasis on ash deposition

(2016) A.M. Beckmann et al.   FUEL

Experimental study of the particle deposition characteristics in an entrained flow gasifier

(2015) Yan Gong et al.   CHEMICAL ENGINEERING SCIENCE

Mechanistic modeling, numerical simulation and validation of slag-layer growth in a coal-fired boiler

(2015) S. Balakrishnan et al.   ENERGY

Particle deposition model for particulate flows at high temperatures in gas turbine components

(2015) Sukhjinder Singh et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW

Investigation of the Influence of the Furnace Temperature on Slagging Deposit Characteristics Using a Digital Image Technique

(2014) Hao Zhou et al.   ENERGY & FUELS

Experimental Measurement of the Effective Thermal Conductivity of Ash Deposit for High Sodium Coal (Zhun Dong Coal) in a 300 KW Test Furnace

(2013) Hao Zhou et al.   ENERGY & FUELS

Evaluation, comparison and validation of deposition criteria for numerical simulation of slagging

(2012) Christoph Wieland et al.   APPLIED ENERGY

Ash deposition modeling using a visco-elastic approach

(2012) Marco Losurdo et al.   FUEL

Fly ash deposition modelling: Requirements for accurate predictions of particle impaction on tubes using RANS-based computational fluid dynamics

(2012) Roman Weber et al.   FUEL

Submodel for Predicting Slag Deposition Formation in Slagging Gasification Systems

(2011) Jianjun Ni et al.   ENERGY & FUELS

Prediction of ash slagging propensity in a pulverized coal combustion furnace

(2011) M.U. Degereji et al.   FUEL

Numerical simulations of the slagging characteristics in a down-fired, pulverized-coal boiler furnace

(2009) Qingyan Fang et al.   FUEL PROCESSING TECHNOLOGY