Investigations on interactions between vortex flow and the induced string cavitation characteristics in real-size diesel tapered-hole nozzles
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Investigations on interactions between vortex flow and the induced string cavitation characteristics in real-size diesel tapered-hole nozzles
Authors
Keywords
Diesel fuel injection, Visualization experiment, CFD, String cavitation, Vortex flow, Vorticity transport
Journal
FUEL
Volume 287, Issue -, Pages 119535
Publisher
Elsevier BV
Online
2020-11-02
DOI
10.1016/j.fuel.2020.119535
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- An experimental study of a very high-pressure diesel injector (up to 5000 bar) by means of optical diagnostics
- (2020) W. Vera-Tudela et al. FUEL
- Correlation analysis upon the influential factors related to the dynamic response characteristics of pressure amplification piston in the fuel system for a low-speed diesel engine
- (2020) Qi Lan et al. FUEL
- Effects of an injector cooling jacket on combustion characteristics of compressed-ignition sprays with a gasoline-hydrogenated catalytic biodiesel blend
- (2020) Tiemin Xuan et al. FUEL
- Experimental study the effect of injection strategies on combustion and emission characteristics in gasoline compression ignition engines using gasoline/hydrogenated catalytic biodiesel blends
- (2020) Wenjun Zhong et al. FUEL
- A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine
- (2020) Xiongbo Duan et al. FUEL
- Influence of water quality on the tip vortex cavitation inception
- (2019) Linya Chen et al. PHYSICS OF FLUIDS
- Three-dimensional flow structure and string cavitation in a fuel injector and their effects on discharged liquid jet
- (2019) Rubby Prasetya et al. International Journal of Engine Research
- First observation and characterization of vortex flow in steel micronozzles for high-pressure diesel injection
- (2019) Seoksu Moon et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Quantification of model uncertainty in RANS simulations: A review
- (2019) Heng Xiao et al. PROGRESS IN AEROSPACE SCIENCES
- Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics
- (2019) Michele Battistoni et al. FUEL
- Large eddy simulation of the tip-leakage cavitating flow with an insight on how cavitation influences vorticity and turbulence
- (2019) H.Y. Cheng et al. APPLIED MATHEMATICAL MODELLING
- Investigation of cavitation and air entrainment during pilot injection in real-size multi-hole diesel nozzles
- (2019) Eduardo Gomez Santos et al. FUEL
- Experimental study on the effect of vortex cavitation in scaled-up diesel injector nozzles and spray characteristics
- (2019) Tianyi Cao et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Effect of fuel temperature on cavitation flow inside vertical multi-hole nozzles and spray characteristics with different nozzle geometries
- (2018) Xin Zhang et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics
- (2018) Ahmed I. El-Seesy et al. FUEL
- Experimental study on the effect of nozzle geometry on string cavitation in real-size optical diesel nozzles and spray characteristics
- (2018) Zhou Chen et al. FUEL
- Simulations on the cavitating flow and corresponding risk of erosion in diesel injector nozzles with double array holes
- (2018) Liang Zhang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- The influence of eccentric needle movement on internal flow and injection characteristics of a multi-hole diesel nozzle
- (2018) Chuqiao Wang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Analysis on the effects of turbulent inflow conditions on spray primary atomization in the near-field by direct numerical simulation
- (2018) F.J. Salvador et al. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW
- Numerical investigation on radial impeller induced vortex rope in draft tube under partial load conditions
- (2018) Yongyan Ni et al. Journal of Mechanical Science and Technology
- On viscoelastic cavitating flows: A numerical study
- (2018) Homa Naseri et al. PHYSICS OF FLUIDS
- Numerical simulation of cavitation and atomization using a fully compressible three-phase model
- (2018) Murali-Girija Mithun et al. Physical Review Fluids
- Visual experimental investigations of string cavitation and residual bubbles in the diesel nozzle and effects on initial spray structures
- (2018) Genmiao Guo et al. International Journal of Engine Research
- Illustrating the effect of viscoelastic additives on cavitation and turbulence with X-ray imaging
- (2018) I. K. Karathanassis et al. Scientific Reports
- Development of a decoupling physical-chemical surrogate (DPCS) model for simulation of the spray and combustion of multi-component biodiesel fuels
- (2018) Pengfei Wang et al. FUEL
- Assessment of compressibility effects on internal nozzle flow in diesel injectors at very high injection pressures
- (2017) F.J. Salvador et al. ENERGY CONVERSION AND MANAGEMENT
- Effects of cavitation flow and stagnant bubbles on the initial temporal evolution of diesel spray
- (2017) Yongqiang Gao et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Simultaneous capture of liquid length of spray and flame lift-off length for second-generation biodiesel/diesel blended fuel in a constant volume combustion chamber
- (2017) Da Li et al. FUEL
- LES investigations on effects of the residual bubble on the single hole diesel injector jet
- (2017) Genmiao Guo et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Unsteady vortical flow simulation in a Francis turbine with special emphasis on vortex rope behavior and pressure fluctuation alleviation
- (2017) Xianwu Luo et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY
- Large Eddy Simulation of Diesel injector including cavitation effects and correlation to erosion damage
- (2016) Phoevos Koukouvinis et al. FUEL
- Visual experiment of transient cavitating flow characteristics in the real-size diesel injector nozzle
- (2016) Zhixia He et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Study of the effect of nozzle hole shape on internal flow and spray characteristics
- (2016) Zhixia He et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Performance of turbulence and cavitation models in prediction of incipient and developed cavitation
- (2016) Phoevos Koukouvinis et al. International Journal of Engine Research
- Numerical simulation of cavitation surge and vortical flows in a diffuser with swirling flow
- (2016) Bin Ji et al. Journal of Mechanical Science and Technology
- Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine
- (2015) Zuo-Yu Sun et al. ENERGY CONVERSION AND MANAGEMENT
- Experimental study of cavitating flow inside vertical multi-hole nozzles with different length–diameter ratios using diesel and biodiesel
- (2015) Zhixia He et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection
- (2015) Seoksu Moon et al. FUEL
- Numerical simulation of incipient cavitation flow in a nozzle of fuel injector
- (2014) Akira Sou et al. COMPUTERS & FLUIDS
- Experimental investigation of the effects of different injection parameters on a direct injection HCCI engine fueled with alcohol–gasoline fuel blends
- (2014) Ali Turkcan et al. FUEL PROCESSING TECHNOLOGY
- Visualization analysis of relationship between vortex flow and cavitation behavior in diesel nozzle
- (2014) Hiroki Watanabe et al. International Journal of Engine Research
- Instantaneous and ensemble average cavitation structures in Diesel micro-channel flow orifices
- (2013) Nicholas Mitroglou et al. FUEL
- Mapping of cavitating flow regimes in injectors for medium-/heavy-duty diesel engines
- (2013) Nicholas Mitroglou et al. International Journal of Engine Research
- Effects of internal flow in a diesel nozzle on spray combustion
- (2013) Tomohiro Hayashi et al. International Journal of Engine Research
- Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-hole injector nozzle
- (2013) Zhixia He et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Characterization of spray and combustion processes of biodiesel fuel injected by diesel engine common rail system
- (2012) Olawole Abiola Kuti et al. FUEL
- Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions
- (2010) Sibendu Som et al. FUEL
- Characterization of string cavitation in large-scale Diesel nozzles with tapered holes
- (2009) M. Gavaises et al. PHYSICS OF FLUIDS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started