Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels

Characterization and Distillation of Pyrolysis Liquids Coming from Polyolefins Segregated of MSW for Their Use as Automotive Diesel Fuel

(2020) Alberto Gala et al.   ENERGY & FUELS

Exploring factors controlling pre-corrosion fatigue of 316L austenitic stainless steel in hydrofluoric acid

(2020) Xu Chen et al.   ENGINEERING FAILURE ANALYSIS

Effect of catalyst shape and multicomponent diffusion flux models on intraparticle transport-kinetic interactions in the gas-phase Fischer-Tropsch synthesis

(2020) Arvind Nanduri et al.   FUEL

Catalytic pyrolysis of waste packaging polyethylene using AlCl3-NaCl eutectic salt as catalyst

(2019) Jian Su et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Hydrotreatment of pyrolysis liquids derived from second-generation bioethanol production residues over NiMo and CoMo catalysts

(2019) Neil Priharto et al.   BIOMASS & BIOENERGY

Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics

(2019) R.K. Singh et al.   FUEL

CFD modeling a fluidized bed large scale reactor with various internal elements near the heated particles feeder

(2018) Olga V. Soloveva et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

The utilisation of oils produced from plastic waste at different pyrolysis temperatures in a DI diesel engine

(2017) Ioannis Kalargaris et al.   ENERGY

Quantitative 3D spatial characterization and flow simulation of coal macropores based on μCT technology

(2017) Xiaoming Ni et al.   FUEL

Hydroprocessing of the LDPE thermal cracking oil into transportation fuels over Pd supported on hierarchical ZSM-5 catalyst

(2017) D.P. Serrano et al.   FUEL

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

(2017) Gartzen Lopez et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

A review on pyrolysis of plastic wastes

(2016) Shafferina Dayana Anuar Sharuddin et al.   ENERGY CONVERSION AND MANAGEMENT

Fuel properties of the oils produced from the pyrolysis of commonly-used polymers: Effect of fractionating column

(2016) Mojtaba Heydariaraghi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Thermal Cracking of Virgin and Waste Plastics of PP and LDPE in a Semibatch Reactor under Atmospheric Pressure

(2015) Guoxun Yan et al.   ENERGY & FUELS

Computational fluid dynamics study of hydrogen generation by low temperature methane reforming in a membrane reactor

(2015) Syed A.M. Said et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

A review of recent advances in catalytic hydrocracking of heavy residues

(2015) Ramakanta Sahu et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Methanol synthesis from CO2 and H2 in multi-tubular fixed-bed reactor and multi-tubular reactor filled with monoliths

(2014) Sofiane Arab et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

CFD (computational fluid dynamics) analysis of a novel reactor design using ion transport membranes for oxy-fuel combustion

(2014) Pervez Ahmed et al.   ENERGY

Transportation fuel production by combination of LDPE thermal cracking and catalytic hydroreforming

(2014) J.M. Escola et al.   WASTE MANAGEMENT

Catalytic hydrotreatment of pyrolytic lignins to give alkylphenolics and aromatics using a supported Ru catalyst

(2014) Arjan Kloekhorst et al.   Catalysis Science & Technology

Modeling of a combined ion transport and porous membrane reactor for oxy-combustion

(2013) M.A. Habib et al.   JOURNAL OF MEMBRANE SCIENCE

Policy: Classify plastic waste as hazardous

(2013) Chelsea M. Rochman et al.   NATURE

Recycling and recovery of post-consumer plastic solid waste in a European context

(2012) Anke Brems et al.   Thermal Science

Hydrotreatment of wood-based pyrolysis oil using zirconia-supported mono- and bimetallic (Pt, Pd, Rh) catalysts

(2011) A.R. Ardiyanti et al.   APPLIED CATALYSIS A-GENERAL

CFD analysis of water gas shift membrane reactor

(2011) R.J. Byron Smith et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Simple Expression for the Tortuosity of Porous Media

(2011) L. Pisani   TRANSPORT IN POROUS MEDIA

CFD simulation of Pd-based membrane reformer when thermally coupled within a fuel cell micro-CHP system

(2010) Leonardo Roses et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

CFD Analysis of a Single Palladium Membrane Tube Reactor for the Dehydrogenation of Cyclohexane as a Chemical Hydrogen Carrier

(2010) Kenichi Mimura et al.   JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

CFD Analysis and Design of Multi-tubular Membrane Reactor for Dehydrogenation of Cyclohexane

(2010) Kenichi Mimura et al.   JOURNAL OF THE JAPAN PETROLEUM INSTITUTE

Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective

(2010) David Lazarevic et al.   RESOURCES CONSERVATION AND RECYCLING

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

(2009) Jude A. Onwudili et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Thermolysis of waste plastics to liquid fuelA suitable method for plastic waste management and manufacture of value added products—A world prospective

(2009) Achyut K. Panda et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions

(2008) A. Marcilla et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

A Six-Lump Kinetic Model for Olefin Hydrogenation, Hydroisomerization and Aromatization in FCC Gasoline Hydro-Upgrading

(2008) Yu Fan et al.   CATALYSIS LETTERS

Tortuosity-porosity relation in porous media flow

(2008) Maciej Matyka et al.   PHYSICAL REVIEW E