Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials

Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2

(2020) Peng Zhang et al.   CERAMICS INTERNATIONAL

Comparison between the effects of phosphorous slag and fly ash on the C-S-H structure, long-term hydration heat and volume deformation of cement-based materials

(2020) Lei Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on fractal footprint of cement-based materials

(2020) Shengwen Tang et al.   POWDER TECHNOLOGY

Fractal characteristics of pore structure of hardened cement paste prepared by pressurized compact molding

(2020) Lunchao Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Resistance improvement of cement mortar containing silica fume to external sulfate attacks at normal temperature

(2020) Xingdong Lv et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of surrounding rock temperature on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high-temperature geothermal tunnel

(2019) Pin Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Fractal dimension of concrete incorporating silica fume and its correlations to pore structure, strength and permeability

(2019) Qing Lü et al.   CONSTRUCTION AND BUILDING MATERIALS

Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume

(2019) Rakesh Choudhary et al.   CONSTRUCTION AND BUILDING MATERIALS

On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes

(2018) A. Hawreen et al.   CONSTRUCTION AND BUILDING MATERIALS

Energy saving benefit, mechanical performance, volume stabilities, hydration properties and products of low heat cement-based materials

(2018) L. Wang et al.   ENERGY AND BUILDINGS

Mechanical properties, long-term hydration heat, shinkage behavior and crack resistance of dam concrete designed with low heat Portland (LHP) cement and fly ash

(2018) L. Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Environmental evaluation, hydration, pore structure, volume deformation and abrasion resistance of low heat Portland (LHP) cement-based materials

(2018) L. Wang et al.   JOURNAL OF CLEANER PRODUCTION

On the pore structures of lightweight self-compacting concrete containing silica fume

(2018) Vahab Naderi Zarnaghi et al.   CONSTRUCTION AND BUILDING MATERIALS

A comparative study on the practical utilization of iron tailings as a complete replacement of normal aggregates in dam concrete with different gradation

(2018) Xingdong Lv et al.   JOURNAL OF CLEANER PRODUCTION

CONTINUOUS MICROSTRUCTURAL CORRELATION OF SLAG/SUPERPLASTICIZER CEMENT PASTES BY HEAT AND IMPEDANCE METHODS VIA FRACTAL ANALYSIS

(2017) S. W. TANG et al.   FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY

Influence of pore structures on the frost resistance of concrete

(2017) Ping Zhang et al.   MAGAZINE OF CONCRETE RESEARCH

Effect of boron waste and boric acid addition on the production of low energy belite cement

(2016) D. Koumpouri et al.   CEMENT & CONCRETE COMPOSITES

β-Belite cements (β-dicalcium silicate) obtained from calcined lime sludge and silica fume

(2016) S. Maheswaran et al.   CEMENT & CONCRETE COMPOSITES

Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement

(2016) J.G. Jang et al.   CEMENT AND CONCRETE RESEARCH

Evaluation of FLWA and SRAs on autogenous deformation and long-term drying shrinkage of high performance concrete

(2016) Tyler Deboodt et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterization of the mesostructural organization of cement particles in fresh cement paste

(2016) Yanrong Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Production and hydration of calcium sulfoaluminate-belite cements derived from aluminium anodising sludge

(2016) Eugênio Bastos da Costa et al.   CONSTRUCTION AND BUILDING MATERIALS

Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test

(2016) Xinhua Cai et al.   CONSTRUCTION AND BUILDING MATERIALS

The shrinkage of alkali activated fly ash

(2015) Y. Ma et al.   CEMENT AND CONCRETE RESEARCH

Active low-energy belite cement

(2015) Theodor Staněk et al.   CEMENT AND CONCRETE RESEARCH

Effect of Silica Fume and Slag on Compressive Strength and Abrasion Resistance of HVFA Concrete

(2014) Alaa M. Rashad et al.   International Journal of Concrete Structures and Materials

Surface fractal dimension: An indicator to characterize the microstructure of cement-based porous materials

(2013) Qiang Zeng et al.   APPLIED SURFACE SCIENCE

Fractal analysis of effect of air void on freeze–thaw resistance of concrete

(2013) Shanshan Jin et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete

(2013) Ping Duan et al.   CONSTRUCTION AND BUILDING MATERIALS

Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system

(2011) Nasir Shafiq   KSCE Journal of Civil Engineering

Surface fractal analysis of pore structure of high-volume fly-ash cement pastes

(2010) Qiang Zeng et al.   APPLIED SURFACE SCIENCE

Characterization of mortars from belite-rich clinkers produced from inorganic wastes

(2010) Ying-Liang Chen et al.   CEMENT & CONCRETE COMPOSITES

The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures

(2010) Yue Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Hydropower in China at present and its further development

(2009) XiaoLin Chang et al.   ENERGY

Design and characterization of low-heat and low-alkalinity cements

(2008) M. Codina et al.   CEMENT AND CONCRETE RESEARCH

Fractal strength of cement gels and universal dimension of fracture surfaces

(2008) T. Ficker   THEORETICAL AND APPLIED FRACTURE MECHANICS