Combining digital image correlation with X-ray computed tomography for characterization of fiber orientation in unidirectional composites

Image-based characterization of fibre waviness in a representative vacuum-bagged corner laminate

(2020) N. Krumenacker et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

On the combined use of Digital Image Correlation and Micro Computed Tomography to measure fibre orientation in short fibre reinforced polymers

(2020) A. Bernasconi et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Computationally efficient method of tracking fibres in composite materials using digital image correlation

(2019) K. Amjad et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Micro-CT measurement of fibre misalignment: Application to carbon/epoxy laminates manufactured in autoclave and by vacuum assisted resin transfer moulding

(2018) Nghi Q. Nguyen et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle

(2018) Mahoor Mehdikhani et al.   COMPOSITES PART B-ENGINEERING

Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation

(2016) Mahoor Mehdikhani et al.   COMPOSITE STRUCTURES

Strain mapping at the micro-scale in hierarchical polymer composites with aligned carbon nanotube grafted fibers

(2016) Mahoor Mehdikhani et al.   COMPOSITES SCIENCE AND TECHNOLOGY

The effect of fiber misalignment on the homogenized properties of unidirectional fiber reinforced composites

(2016) Yujun Li et al.   MECHANICS OF MATERIALS

Synchrotron radiation computed tomography for experimental validation of a tensile strength model for unidirectional fibre-reinforced composites

(2015) Y. Swolfs et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Quantification of the internal structure and automatic generation of voxel models of textile composites from X-ray computed tomography data

(2015) Ilya Straumit et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

X-ray computed tomography used to measure fiber orientation in CFRP laminates

(2014) Akinori Yoshimura et al.   ADVANCED COMPOSITE MATERIALS

Finite element mesh generation for composites with ply waviness based on X-ray computed tomography

(2013) Gennadiy Nikishkov et al.   ADVANCES IN ENGINEERING SOFTWARE

A novel image analysis procedure for measuring fibre misalignment in unidirectional fibre composites

(2008) K KRATMANN et al.   COMPOSITES SCIENCE AND TECHNOLOGY