Tribological performance of DLC-coated ceramics against cemented carbide under dry sliding conditions
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Tribological performance of DLC-coated ceramics against cemented carbide under dry sliding conditions
Authors
Keywords
Surface friction, Wear resistance, DLC coating, Si, 3, N, 4, /TiC ceramics
Journal
CERAMICS INTERNATIONAL
Volume -, Issue -, Pages -
Publisher
Elsevier BV
Online
2021-03-07
DOI
10.1016/j.ceramint.2021.03.003
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Analysis of morphological, microstructural, electrochemical and nano mechanical characteristics of TiCN coatings prepared under N2 gas flow rate by chemical vapour deposition (CVD) process at higher temperature
- (2020) Soham Das et al. CERAMICS INTERNATIONAL
- Applicability of DLC and WC/C low friction coatings on Al2O3/TiCN mixed ceramic cutting tools for dry machining of hardened 52100 steel
- (2020) Ch Sateesh Kumar et al. CERAMICS INTERNATIONAL
- LIPSS combined with ALD MoS2 nano-coatings for enhancing surface friction and hydrophobic performances
- (2020) Youqiang Xing et al. SURFACE & COATINGS TECHNOLOGY
- Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy
- (2020) Michaela Remešová et al. APPLIED SURFACE SCIENCE
- Investigations into friction and wear behavior of AlTiN and AlCrN coatings deposited on laser textured WC/Co using novel open tribometer tests
- (2020) Sarvesh Kumar Mishra et al. SURFACE & COATINGS TECHNOLOGY
- Progress in tribological research of SiC ceramics in unlubricated sliding-A review
- (2020) Wei Zhang et al. MATERIALS & DESIGN
- Enhanced tribological properties of Y/MoS2 composite coatings prepared by chemical vapor deposition
- (2020) J. Yi et al. CERAMICS INTERNATIONAL
- Mechanical characterisation and machining evaluation of ceramic cutting tools functionally graded with six layers
- (2020) M. Bertolete et al. CERAMICS INTERNATIONAL
- Properties of (Cr,Al,Si)N-(DLC-Si) composite coatings deposited on a cutting ceramic substrate
- (2020) S.N. Grigoriev et al. CERAMICS INTERNATIONAL
- Preparation of nano - coating powder CaF2@Al(OH)3 and its application in Al2O3/Ti(C,N) self-lubricating ceramic tool materials
- (2020) Lianggang Ji et al. CERAMICS INTERNATIONAL
- Improvement of solid particle erosion and corrosion resistance using TiAlSiN/Cr multilayer coatings
- (2020) Jiabin Gu et al. SURFACE & COATINGS TECHNOLOGY
- Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron
- (2020) Luqiang Tu et al. Journal of Manufacturing Processes
- Wear of TiAlN and DLC coated microtools in micromilling of Ti-6Al-4V alloy
- (2020) Maksym Ziberov et al. Journal of Manufacturing Processes
- A review on cutting tool technology in machining of Ni-based superalloys
- (2020) Wei Fan et al. The International Journal of Advanced Manufacturing Technology
- Microstructural influence of the thermal behavior of arc deposited TiAlN coatings with high aluminum content
- (2020) A.B.B. Chaar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhancing the machining performance by cutting tool surface modifications: a focused review
- (2019) Yuhan Chen et al. MACHINING SCIENCE AND TECHNOLOGY
- Wear performance of electrohydrodynamically atomized WS2 coatings deposited on biomimetic shark-skin textured surfaces
- (2019) Xuemu Li et al. TRIBOLOGY INTERNATIONAL
- Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel
- (2019) Kedong Zhang et al. Journal of Manufacturing Processes
- Effect of surface wettability on tribological properties of Al2O3/TiC ceramic under wet lubrication
- (2019) Dongliang Ge et al. CERAMICS INTERNATIONAL
- Design of “double layer” texture to obtain superhydrophobic and high wear-resistant PTFE coatings on the surface of Al2O3/Ni layered ceramics
- (2019) Hengzhong Fan et al. TRIBOLOGY INTERNATIONAL
- Lubrication performance of graphene-containing oil on steel and DLC-coated surfaces
- (2019) Janez Kogovšek et al. TRIBOLOGY INTERNATIONAL
- Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dynamic stability in micro milling of die steel (P-20)
- (2019) Priyabrata Sahoo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Analysis of tool-chip interface characteristics of self-lubricating tools with nanotextures and WS2/Zr coatings in dry cutting
- (2018) Youqiang Xing et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and dry-sliding wear properties of TiC/CaF 2 /γ-Ni self-lubricating wear-resistant composite coating produced by co-axial powder feeding plasma transferred arc (PTA) cladding process
- (2018) Yuan-Fu Liu et al. SURFACE & COATINGS TECHNOLOGY
- Effect of surface textures and electrohydrodynamically atomized WS2 films on the friction and wear properties of ZrO2 coatings
- (2018) Xuemu Li et al. CERAMICS INTERNATIONAL
- Ceramic cutting tools out of nanostructured refractory compounds
- (2017) Edwin Gevorkyan et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Al2O3–Mo cutting tools for machining hardened stainless steel
- (2013) K. Broniszewski et al. WEAR
- High-temperature self-lubricated properties of Al2O3/Mo laminated composites
- (2012) Ya-e Qi et al. WEAR
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search