Molecular Design of Efficient Chlorine‐ and Carboxylate‐Functionalized Donor Polymers for Nonfullerene Organic Solar Cells Enabling Processing with Eco‐Friendly Solvent in Air

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review

(2020) Gururaj P. Kini et al.   ADVANCED MATERIALS

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset between Methylated Polymer Donor and Brominated Acceptor

(2020) Chenkai Sun et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

18% Efficiency organic solar cells

(2020) Qishi Liu et al.   Science Bulletin

Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

(2020) Yong Cui et al.   ADVANCED MATERIALS

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

(2020) Zhi Jiang et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

New Phase for Organic Solar Cell Research: Emergence of Y-Series Electron Acceptors and Their Perspectives

(2020) Shuixing Li et al.   ACS Energy Letters

Achieving Balanced Crystallization Kinetics of Donor and Acceptor by Sequential‐Blade Coated Double Bulk Heterojunction Organic Solar Cells

(2020) Yilin Wang et al.   Advanced Energy Materials

Energy Level Alignment in Ternary Organic Solar Cells

(2020) Vincent Lami et al.   Advanced Electronic Materials

An Optimized Fibril Network Morphology Enables High‐Efficiency and Ambient‐Stable Polymer Solar Cells

(2020) Jiali Song et al.   Advanced Science

Optimization Requirements of Efficient Polythiophene:Nonfullerene Organic Solar Cells

(2020) Ziqi Liang et al.   Joule

Highly Efficient Nonfullerene Organic Photovoltaic Devices with 10% Power Conversion Efficiency Enabled by a Fine‐Tuned and Solution‐Processed Hole‐Transporting Layer

(2020) Nai-Wei Teng et al.   Solar RRL

Case Study on the Correlation between Crystal Packing and Miscibility of Chlorinated Thiophene–Based Donor Polymers for Nonfullerene Organic Solar Cells with Long Shelf Life

(2020) Sung Jae Jeon et al.   Solar RRL

On the understanding of energy loss and device fill factor trade-offs in non-fullerene organic solar cells with varied energy levels

(2020) Xuning Zhang et al.   Nano Energy

Ambient Processable and Stable All-Polymer Organic Solar Cells

(2019) Yalong Xu et al.   ADVANCED FUNCTIONAL MATERIALS

Air-Processed, Stable Organic Solar Cells with High Power Conversion Efficiency of 7.41%

(2019) Pandeng Li et al.   Small

Key Parameters Requirements for Non-Fullerene-Based Organic Solar Cells with Power Conversion Efficiency >20%

(2019) Yuliar Firdaus et al.   Advanced Science

A 3-Fluoro-4-hexylthiophene-Based Wide Bandgap Donor Polymer for 10.9% Efficiency Eco-Friendly Nonfullerene Organic Solar Cells

(2019) Jeong Eun Yu et al.   Small

Asymmetric Wide-Bandgap Polymers Simultaneously Improve the Open-Circuit Voltage and Short-Circuit Current for Organic Photovoltaics

(2019) Shaorong Huang et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Highly Efficient Fullerene-Free Organic Solar Cells Operate at Near Zero Highest Occupied Molecular Orbital Offsets

(2019) Shuixing Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Drastic Changes in Properties of Donor–Acceptor Polymers Induced by Asymmetric Structural Isomers for Application to Polymer Solar Cells

(2019) Sung Jae Jeon et al.   ACS Applied Materials & Interfaces

Influences of Non-fullerene Acceptor Fluorination on Three-Dimensional Morphology and Photovoltaic Properties of Organic Solar Cells

(2019) Mengxue Chen et al.   ACS Applied Materials & Interfaces

Carboxylate-Substituted Polythiophenes for Efficient Fullerene-Free Polymer Solar Cells: The Effect of Chlorination on Their Properties

(2019) Qi Wang et al.   MACROMOLECULES

Study of Burn‐In Loss in Green Solvent‐Processed Ternary Blended Organic Photovoltaics Derived from UV‐Crosslinkable Semiconducting Polymers and Nonfullerene Acceptors

(2019) Junwoo Lee et al.   Advanced Energy Materials

Eco‐Compatible Solvent‐Processed Organic Photovoltaic Cells with Over 16% Efficiency

(2019) Ling Hong et al.   ADVANCED MATERIALS

13.9%‐Efficiency and Eco‐Friendly Nonfullerene Polymer Solar Cells Obtained by Balancing Molecular Weight and Solubility in Chlorinated Thiophene‐Based Polymer Backbones

(2019) Sung Jae Jeon et al.   Small

Reduced Nonradiative Energy Loss Caused by Aggregation of Nonfullerene Acceptor in Organic Solar Cells

(2019) Yunpeng Qin et al.   Advanced Energy Materials

Evaporation‐Free Nonfullerene Flexible Organic Solar Cell Modules Manufactured by An All‐Solution Process

(2019) Yong Woon Han et al.   Advanced Energy Materials

A New Wide Bandgap Donor Polymer for Efficient Nonfullerene Organic Solar Cells with a Large Open‐Circuit Voltage

(2019) Yumin Tang et al.   Advanced Science

Accurate Determination of the Minimum HOMO Offset for Efficient Charge Generation using Organic Semiconducting Alloys

(2019) Jianyun Zhang et al.   Advanced Energy Materials

17% efficiency organic photovoltaic cell with superior processability

(2019) Yong Cui et al.   National Science Review

Alkylsilyl Functionalized Copolymer Donor for Annealing-Free High Performance Solar Cells with over 11% Efficiency: Crystallinity Induced Small Driving Force

(2018) Bin Huang et al.   ADVANCED FUNCTIONAL MATERIALS

Nonhalogen Solvent-Processed Asymmetric Wide-Bandgap Polymers for Nonfullerene Organic Solar Cells with Over 10% Efficiency

(2018) Yongkang An et al.   ADVANCED FUNCTIONAL MATERIALS

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

(2018) Shaoqing Zhang et al.   ADVANCED MATERIALS

Modulating Molecular Orientation Enables Efficient Nonfullerene Small-Molecule Organic Solar Cells

(2018) Liyan Yang et al.   CHEMISTRY OF MATERIALS

Critical Role of Molecular Electrostatic Potential on Charge Generation in Organic Solar Cells

(2018) Huifeng Yao et al.   CHINESE JOURNAL OF CHEMISTRY

A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells

(2018) Sunsun Li et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Highly efficient non-fullerene polymer solar cells enabled by novel non-conjugated small-molecule cathode interlayers

(2018) Ruixiang Peng et al.   Journal of Materials Chemistry A

Thermal behaviour of dicarboxylic ester bithiophene polymers exhibiting a high open-circuit voltage

(2018) Ruurd Heuvel et al.   Journal of Materials Chemistry C

Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors

(2018) Jianquan Zhang et al.   Nature Energy

The Crucial Role of Chlorinated Thiophene Orientation in Conjugated Polymers for Photovoltaic Devices

(2018) Yanan Wu et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Organic and solution-processed tandem solar cells with 17.3% efficiency

(2018) Lingxian Meng et al.   SCIENCE

Organic Solar Cell Materials toward Commercialization

(2018) Rongming Xue et al.   Small

Achieving Balanced Crystallinity of Donor and Acceptor by Combining Blade-Coating and Ternary Strategies in Organic Solar Cells

(2018) Lin Zhang et al.   ADVANCED MATERIALS

Structural optimization in the same polymer backbones for efficient polymer solar cells: Relationship between steric hindrance and molecular weight

(2018) Sung Jae Jeon et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics

(2018) Baobing Fan et al.   Nature Energy

Molecular design of a wide-band-gap conjugated polymer for efficient fullerene-free polymer solar cells

(2017) Delong Liu et al.   Energy & Environmental Science

Fluorescence intermittency originates from reclustering in two-dimensional organic semiconductors

(2017) Anthony Ruth et al.   Nature Communications

Eco-Friendly Solvent-Processed Fullerene-Free Polymer Solar Cells with over 9.7% Efficiency and Long-Term Performance Stability

(2017) Gi Eun Park et al.   Advanced Energy Materials

Surprising Effects upon Inserting Benzene Units into a Quaterthiophene-Based D-A Polymer-Improving Non-Fullerene Organic Solar Cells via Donor Polymer Design

(2017) Shangshang Chen et al.   Advanced Energy Materials

Flexible and Semitransparent Organic Solar Cells

(2017) Yaowen Li et al.   Advanced Energy Materials

Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials

(2016) Huifeng Yao et al.   CHEMICAL REVIEWS

Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells

(2016) Derya Baran et al.   NATURE MATERIALS

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

(2016) Haijun Bin et al.   Nature Communications

A New Polythiophene Derivative for High Efficiency Polymer Solar Cells with PCE over 9%

(2016) Qunping Fan et al.   Advanced Energy Materials

Fast charge separation in a non-fullerene organic solar cell with a small driving force

(2016) Jing Liu et al.   Nature Energy

Optimizing Light-Harvesting Polymers via Side Chain Engineering

(2015) Peng Liu et al.   ADVANCED FUNCTIONAL MATERIALS

“All That Glisters Is Not Gold”: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells

(2015) Riccardo Po et al.   MACROMOLECULES

Efficient Low-Bandgap Polymer Solar Cells with High Open-Circuit Voltage and Good Stability

(2015) Tingxuan Ma et al.   Advanced Energy Materials

Bulk Heterojunction Solar Cells: Morphology and Performance Relationships

(2014) Ye Huang et al.   CHEMICAL REVIEWS

25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation

(2013) Alan J. Heeger   ADVANCED MATERIALS

Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure

(2012) Zhicai He et al.   Nature Photonics

Stability of Polymer Solar Cells

(2011) Mikkel Jørgensen et al.   ADVANCED MATERIALS