Selective coaxial ink 3D printing for single-pass fabrication of smart elastomeric foam with embedded stretchable sensor

Lightweight, Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

(2020) Roland Yingjie Tay et al.   ADVANCED FUNCTIONAL MATERIALS

Untethered Soft Robotics with Fully Integrated Wireless Sensing and Actuating Systems for Somatosensory and Respiratory Functions

(2020) Byungkook Oh et al.   Soft Robotics

Double-negative-index ceramic aerogels for thermal superinsulation

(2019) Xiang Xu et al.   SCIENCE

Revisiting effects of microarchitecture on mechanics of elastomeric cellular materials

(2019) Xiaowei Zhu et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Biocompatible Sensors: Biocompatible Soft Fluidic Strain and Force Sensors for Wearable Devices (Adv. Funct. Mater. 7/2019)

(2019) Siyi Xu et al.   ADVANCED FUNCTIONAL MATERIALS

Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage

(2019) Yuxiong Guo et al.   ADVANCED ENGINEERING MATERIALS

Direct Ink Writing of Adjustable Electrochemical Energy Storage Device with High Gravimetric Energy Densities

(2019) Jingxin Zhao et al.   ADVANCED FUNCTIONAL MATERIALS

Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers

(2019) Lu-yu Zhou et al.   ACS Applied Materials & Interfaces

Optical lace for synthetic afferent neural networks

(2019) Patricia A. Xu et al.   Science Robotics

Voxelated soft matter via multimaterial multinozzle 3D printing

(2019) Mark A. Skylar-Scott et al.   NATURE

Stretchable elastic synaptic transistors for neurologically integrated soft engineering systems

(2019) Hyunseok Shim et al.   Science Advances

3D printed structures for modeling the Young’s modulus of bamboo parenchyma

(2018) P.G. Dixon et al.   Acta Biomaterialia

Architected Lattices with High Stiffness and Toughness via Multicore-Shell 3D Printing

(2018) Jochen Mueller et al.   ADVANCED MATERIALS

Rotational 3D printing of damage-tolerant composites with programmable mechanics

(2018) Jordan R. Raney et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Advanced desalination of dye/NaCl mixtures by a loose nanofiltration membrane for digital ink-jet printing

(2018) Wenyuan Ye et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Graphene-based cellular materials with extremely low density and high pressure sensitivity based on self-assembled graphene oxide liquid crystals

(2018) Xianzhang Wu et al.   Journal of Materials Chemistry C

Mechanics of elastomeric molecular composites

(2018) Pierre Millereau et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

3D-Printed Graphene/Polydimethylsiloxane Composites for Stretchable and Strain-Insensitive Temperature Sensors

(2018) Zhenyu Wang et al.   ACS Applied Materials & Interfaces

Additive manufacturing of elastomeric foam with cell unit design for broadening compressive stress plateau

(2018) Xiaowei Zhu et al.   RAPID PROTOTYPING JOURNAL

3D-Printed Mechanical Metamaterials with High Energy Absorption

(2018) Shangqin Yuan et al.   Advanced Materials Technologies

Mechanics of hard-magnetic soft materials

(2018) Ruike Zhao et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Custom 3D Printable Silicones with Tunable Stiffness

(2017) Matthew M. Durban et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Multi-mode strain and curvature sensors for soft robotic applications

(2017) Edward L. White et al.   SENSORS AND ACTUATORS A-PHYSICAL

Development of bendable strain sensor with embedded microchannels using 3D printing

(2017) Shweta Agarwala et al.   SENSORS AND ACTUATORS A-PHYSICAL

3D Printed Silicones with Shape Memory

(2017) Amanda S. Wu et al.   Scientific Reports

Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink

(2016) Jung Hyun Kim et al.   ACS Nano

Coaxial printing method for directly writing stretchable cable as strain sensor

(2016) Hai-liang Yan et al.   APPLIED PHYSICS LETTERS

Fused deposition modelling with ABS–graphene nanocomposites

(2016) Sithiprumnea Dul et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Stereolithographic (SLA) 3D printing of oral modified-release dosage forms

(2016) Jie Wang et al.   INTERNATIONAL JOURNAL OF PHARMACEUTICS

Printing soft matter in three dimensions

(2016) Ryan L. Truby et al.   NATURE

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

(2016) Johan U. Lind et al.   NATURE MATERIALS

3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response

(2016) A. Maiti et al.   Scientific Reports

Programming Mechanical and Physicochemical Properties of 3D Hydrogel Cellular Microcultures via Direct Ink Writing

(2016) Joselle M. McCracken et al.   Advanced Healthcare Materials

Selective laser melting of stainless steel 316L with low porosity and high build rates

(2016) Zhongji Sun et al.   MATERIALS & DESIGN

Lightweight, Superelastic, and Mechanically Flexible Graphene/Polyimide Nanocomposite Foam for Strain Sensor Application

(2015) Yuyang Qin et al.   ACS Nano

Poroelastic Foams for Simple Fabrication of Complex Soft Robots

(2015) Benjamin C. Mac Murray et al.   ADVANCED MATERIALS

Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations

(2015) Anders Clausen et al.   ADVANCED MATERIALS

Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing

(2015) Andreas Frutiger et al.   ADVANCED MATERIALS

Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics

(2015) Ethan B. Secor et al.   ADVANCED MATERIALS

Multi-scale intrinsic deformation mechanisms of 3D graphene foam

(2015) Andy Nieto et al.   CARBON

Seamless full color holographic printing method based on spatial partitioning of SLM

(2015) Youngmin Kim et al.   OPTICS EXPRESS

Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness

(2014) Eric B. Duoss et al.   ADVANCED FUNCTIONAL MATERIALS

Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers

(2014) Joseph T. Muth et al.   ADVANCED MATERIALS

Magnetic, superhydrophobic and durable silicone sponges and their applications in removal of organic pollutants from water

(2014) Lingxiao Li et al.   CHEMICAL COMMUNICATIONS

Durable superhydrophobic/superoleophilic PDMS sponges and their applications in selective oil absorption and in plugging oil leakages

(2014) Xia Zhao et al.   Journal of Materials Chemistry A

A Polydimethylsiloxane (PDMS) Sponge for the Selective Absorption of Oil from Water

(2011) Sung-Jin Choi et al.   ACS Applied Materials & Interfaces

Viscoelastic and compression fatigue properties of closed cell PVDF foam

(2009) N. Frioui et al.   MECHANICS OF MATERIALS

Physical properties of silicone foams filled with carbon nanotubes and functionalized graphene sheets

(2008) Raquel Verdejo et al.   EUROPEAN POLYMER JOURNAL