Feasibility of glass/basalt fiber reinforced seawater coral sand mortar for 3D printing

Short-term flexural performance of seawater-mixed recycled-aggregate GFRP-reinforced concrete beams

(2020) Adel Younis et al.   COMPOSITE STRUCTURES

Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions

(2020) Zhijian Li et al.   COMPOSITES PART B-ENGINEERING

Genetic programming based formulation for compressive and flexural strength of cement mortar containing nano and micro silica after freeze and thaw cycles

(2020) Seyed Ali Emamian et al.   CONSTRUCTION AND BUILDING MATERIALS

Cementing efficiency factors of ceramic polishing residue in compressive strength and chloride resistance of mortar

(2020) L.G. Li et al.   POWDER TECHNOLOGY

The effects of seawater and nanosilica on the performance of blended cements and composites

(2020) Pawel Sikora et al.   Applied Nanoscience

Effects of natural seawater and sea sand on the compressive behaviour of unconfined and carbon fibre-reinforced polymer-confined concrete

(2020) Guangming Chen et al.   ADVANCES IN STRUCTURAL ENGINEERING

On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)

(2020) Victor C. Li et al.   CEMENT AND CONCRETE RESEARCH

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

(2020) Arun R. Arunothayan et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental investigation of particle size effect on the self-healing performance of microcapsule for cemented coral sand

(2020) Dongsheng Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

A rheology-based quasi-static shape retention model for digitally fabricated concrete

(2020) Jacques Kruger et al.   CONSTRUCTION AND BUILDING MATERIALS

Energy-saving potential of 3D printed concrete building with integrated living wall

(2020) Yawen He et al.   ENERGY AND BUILDINGS

Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete

(2020) Leo Gu Li et al.   Journal of Building Engineering

Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing

(2019) Guowei Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

Structural performance of FRP confined seawater concrete columns under chloride environment

(2019) Ao Zhou et al.   COMPOSITE STRUCTURES

Experimental research on transition from scale 3D printing to full-size printing in construction

(2019) Zibo Zuo et al.   CONSTRUCTION AND BUILDING MATERIALS

Underwater 3D printing of cement-based mortar

(2019) Brahim Mazhoud et al.   CONSTRUCTION AND BUILDING MATERIALS

3D concrete printing: A lower bound analytical model for buildability performance quantification

(2019) Jacques Kruger et al.   AUTOMATION IN CONSTRUCTION

Printability region for 3D concrete printing using slump and slump flow test

(2019) Yi Wei Daniel Tay et al.   COMPOSITES PART B-ENGINEERING

Effect of rigid fibres on aggregate packing

(2019) S.H. Chu et al.   CONSTRUCTION AND BUILDING MATERIALS

3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse

(2019) Jacques Kruger et al.   COMPOSITES PART B-ENGINEERING

Seawater cement paste: Effects of seawater and roles of water film thickness and superplasticizer dosage

(2019) L.G. Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Reuse of hazardous electrolytic manganese residue: Detailed leaching characterization and novel application as a cementitious material

(2019) Dengquan Wang et al.   RESOURCES CONSERVATION AND RECYCLING

3D printing using concrete extrusion: A roadmap for research

(2018) R.A. Buswell et al.   CEMENT AND CONCRETE RESEARCH

Fresh properties of a novel 3D printing concrete ink

(2018) Yu Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars

(2018) Zike Wang et al.   CORROSION SCIENCE

A methodology for quantifying the impact of casting procedure on anisotropy in fiber-reinforced concrete using X-ray CT

(2018) Tyler Oesch et al.   MATERIALS AND STRUCTURES

Shear capacity of sea sand concrete beams with polymer bars

(2018) Lijuan Li et al.   PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS

Roles of water film thickness and fibre factor in workability of polypropylene fibre reinforced mortar

(2018) L.G. Li et al.   CEMENT & CONCRETE COMPOSITES

Performance evaluation of polypropylene fibre reinforced recycled aggregate concrete

(2018) Chandra Sekhar Das et al.   CONSTRUCTION AND BUILDING MATERIALS

Fresh and hardened properties of seawater-mixed concrete

(2018) Adel Younis et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand

(2018) Shutong Yang et al.   CONSTRUCTION AND BUILDING MATERIALS

Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars

(2018) Zhiqiang Dong et al.   CONSTRUCTION AND BUILDING MATERIALS

Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions

(2018) L.G. Li et al.   POWDER TECHNOLOGY

Feasibility of using marine sediments in SCC pastes as supplementary cementitious materials

(2018) Amine el Mahdi Safhi et al.   POWDER TECHNOLOGY

Recycling of marble dust as paste replacement for improving strength, microstructure and eco-friendliness of mortar

(2018) L.G. Li et al.   JOURNAL OF CLEANER PRODUCTION

3D printable concrete: Mixture design and test methods

(2018) A.V. Rahul et al.   CEMENT & CONCRETE COMPOSITES

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

(2017) Biranchi Panda et al.   MATERIALS LETTERS

Chloride diffusion study of coral concrete in a marine environment

(2016) Bo Da et al.   CONSTRUCTION AND BUILDING MATERIALS

Biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete with different fiber lengths and placement methods

(2015) Doo-Yeol Yoo et al.   CEMENT & CONCRETE COMPOSITES

Hardened properties of high-performance printing concrete

(2012) T.T. Le et al.   CEMENT AND CONCRETE RESEARCH

Developments in construction-scale additive manufacturing processes

(2011) S. Lim et al.   AUTOMATION IN CONSTRUCTION

Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28days

(2007) S.E. Chidiac et al.   CEMENT & CONCRETE COMPOSITES