Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

(2020) Huihui Zhi et al.   ACTA MATERIALIA

Effect of Annealing Heat Treatment on the Microstructural Evolution and Mechanical Properties of Hot Isostatic Pressed 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

(2020) Kanwal Chadha et al.   Metals

Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting

(2020) H. Wang et al.   ACTA MATERIALIA

Near-threshold fatigue crack growth rates of laser powder bed fusion produced Ti-6Al-4V

(2020) Thorsten Hermann Becker et al.   ACTA MATERIALIA

Spattering and denudation in laser powder bed fusion process: Multiphase flow modelling

(2020) Hui Chen et al.   ACTA MATERIALIA

Multiaxial plasticity and fracture behavior of stainless steel 316L by laser powder bed fusion: Experiments and computational modeling

(2020) Alexander E. Wilson-Heid et al.   ACTA MATERIALIA

Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting

(2019) O.O. Salman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hardening mechanisms and impact toughening of a high-strength steel containing low Ni and Cu additions

(2019) H.J. Kong et al.   ACTA MATERIALIA

Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment

(2019) Nan Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques

(2019) O. Muránsky et al.   ACTA MATERIALIA

Dislocation density distribution at slip band-grain boundary intersections

(2019) Yi Guo et al.   ACTA MATERIALIA

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

(2019) Rongpei Shi et al.   ACTA MATERIALIA

Influence of phosphorus on hot deformation microstructure of a Ni-Fe-Cr based alloy

(2019) Yunsheng Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An integrated-model for austenite yield strength considering the influence of temperature and strain rate in lean steels

(2019) Adriana Eres-Castellanos et al.   MATERIALS & DESIGN

Effect of energy density on laser powder bed fusion built single tracks and thin wall structures with 100 µm preplaced powder layer thickness

(2019) S.K. Nayak et al.   OPTICS AND LASER TECHNOLOGY

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

(2018) Fan Zhang et al.   ACTA MATERIALIA

Dislocation-type evolution in quasi-statically compressed polycrystalline nickel

(2018) Chaoyi Zhu et al.   ACTA MATERIALIA

Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells

(2018) Decheng Kong et al.   ELECTROCHIMICA ACTA

Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting

(2018) Tomasz Kurzynowski et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments

(2018) Dunyong Deng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Exploring the correlation between the austenite yield strength and the bainite lath thickness

(2018) S.M.C. van Bohemen   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Dislocation network in additive manufactured steel breaks strength–ductility trade-off

(2018) Leifeng Liu et al.   Materials Today

High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained

(2018) Md. Shamsujjoha et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Subgrain-controlled grain growth in the laser-melted 316 L promoting strength at high temperatures

(2018) Kamran Saeidi et al.   Royal Society Open Science

Characterization of hardness, elastic modulus and fracture toughness of RB-SiC ceramics at elevated temperature by Vickers test

(2018) Xiaoshuang Rao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing

(2018) Y.J. Yin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting

(2017) O. Fergani et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

On the effect of chemical composition on yield strength of TWIP steels

(2017) Pavel Kusakin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

High dislocation density–induced large ductility in deformed and partitioned steels

(2017) B. B. He et al.   SCIENCE

Determination of geometrically necessary dislocations in large shear strain localization in aluminum

(2016) Chaoyi Zhu et al.   ACTA MATERIALIA

Hardened austenite steel with columnar sub-grain structure formed by laser melting

(2015) K. Saeidi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting

(2014) J. A. Cherry et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Synergistic effects of Cu and Ni on nanoscale precipitation and mechanical properties of high-strength steels

(2013) Z.B. Jiao et al.   ACTA MATERIALIA

An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel–chromium alloy (800H) during hot deformation

(2013) Yu Cao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An EBSD Study of the Deformation of Service-Aged 316 Austenitic Steel

(2013) David N. Githinji et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Mechanical Behaviors of Ultrafine-Grained 301 Austenitic Stainless Steel Produced by Equal-Channel Angular Pressing

(2010) C. X. Huang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction

(2010) Angus J. Wilkinson et al.   PHILOSOPHICAL MAGAZINE

Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques

(2008) Sumantra Mandal et al.   PHILOSOPHICAL MAGAZINE

Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction

(2008) W. Pantleon   SCRIPTA MATERIALIA