Pyrolysis of Polystyrene Waste: A Review

Functionalized PET Waste Based Low-Cost Adsorbents for Adsorptive Removal of Cu(II) Ions from Aqueous Media

(2020) Oana Ionela Ungureanu et al.   Water

Synthesis of valuable intermediate products from natural rubber under supercritical alcohol conditions

(2019) Nabeel Ahmad et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Catalytic Depolymerisation of Polystyrene

(2018) Jamil Anwar et al.   Progress in Rubber Plastics and Recycling Technology

Production, use, and fate of all plastics ever made

(2017) Roland Geyer et al.   Science Advances

Pyrolysis polygeneration of poplar wood: Effect of heating rate and pyrolysis temperature

(2016) Dengyu Chen et al.   BIORESOURCE TECHNOLOGY

Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review

(2016) Xuesong Zhang et al.   GREEN CHEMISTRY

Liquefaction of major lignocellulosic biomass constituents in supercritical ethanol

(2015) Steffen Brand et al.   ENERGY

Thermochemical conversion of Phellinus pomaceus via supercritical fluid extraction and pyrolysis processes

(2015) Halil Durak   ENERGY CONVERSION AND MANAGEMENT

Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor

(2015) Yuan Xue et al.   FUEL

Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene

(2015) Juniza Md Saad et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor

(2014) Huiyan Zhang et al.   ENERGY & FUELS

A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil

(2014) Faisal Abnisa et al.   ENERGY CONVERSION AND MANAGEMENT

Thermogravimetric analysis of the pyrolysis characteristics and kinetics of plastics and biomass blends

(2014) Adetoyese Olajire Oyedun et al.   FUEL PROCESSING TECHNOLOGY

Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts

(2014) Adnan et al.   Journal of the Taiwan Institute of Chemical Engineers

Conversion of waste polystyrene through catalytic degradation into valuable products

(2014) Jasmin Shah et al.   KOREAN JOURNAL OF CHEMICAL ENGINEERING

Pyrolysis of mixtures of palm shell and polystyrene: An optional method to produce a high-grade of pyrolysis oil

(2013) Faisal Abnisa et al.   Environmental Progress & Sustainable Energy

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

(2013) Maite Artetxe et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Reverse polymerization of waste polystyrene through microwave assisted pyrolysis

(2013) Andrea Undri et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Catalytic activity of metal impregnated catalysts for degradation of waste polystyrene

(2013) Jasmin Shah et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model

(2013) Seyed Mousa FakhrHoseini et al.   Journal of Chemistry

Catalytic decomposition of polystyrene. The role of acid and basic active centers

(2012) M. Marczewski et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

A Review on Waste to Energy Processes Using Microwave Pyrolysis

(2012) Su Shiung Lam et al.   Energies

Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed

(2012) Gorka Elordi et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Plastic Degradation and Its Environmental Implications with Special Reference to Poly(ethylene terephthalate)

(2012) Hayden Webb et al.   Polymers

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

(2011) A. López et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Preparation of mesoporous MCM-41 from natural sepiolite and its catalytic activity of cracking waste polystyrene plastics

(2011) Shengming Jin et al.   APPLIED CLAY SCIENCE

Hydrothermal liquefaction of biomass: A review of subcritical water technologies

(2011) Saqib Sohail Toor et al.   ENERGY

Stability of ZSM-11 and BETA zeolites during the catalytic cracking of low-density polyethylene

(2011) María S. Renzini et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

(2011) M. Arabiourrutia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste

(2011) A. Adrados et al.   WASTE MANAGEMENT

Bio-Oil from Hydro-Liquefaction of Bagasse in Supercritical Ethanol

(2010) Jade Chumpoo et al.   ENERGY & FUELS

Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems

(2010) Jasmin Shah et al.   ENERGY CONVERSION AND MANAGEMENT

Catalytic degradation of waste high-density polyethylene into fuel products using BaCO3 as a catalyst

(2010) M. Rasul Jan et al.   FUEL PROCESSING TECHNOLOGY

Co-liquefaction of Makarwal coal and waste polystyrene by microwave–metal interaction pyrolysis in copper coil reactor

(2010) Zahid Hussain et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Effect of Metal Oxide Catalysts on Degradation of Waste Polystyrene in Hydrogen at Elevated Temperature and Pressure in Benzene Solution

(2010) Praphulla Tiwary et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Catalytic degradation of polyethylene over SBA-16

(2010) Suek Joo Choi et al.   KOREAN JOURNAL OF CHEMICAL ENGINEERING

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

(2009) Jude A. Onwudili et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Pyro-GC/MS and thermal degradation studies in polystyrene–poly(vinyl chloride) blends

(2009) Z. Ahmad et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Thermolysis of waste plastics to liquid fuelA suitable method for plastic waste management and manufacture of value added products—A world prospective

(2009) Achyut K. Panda et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor

(2008) G. Elordi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Influence of FCC catalyst steaming on HDPE pyrolysis product distribution

(2008) M. Olazar et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Thermal decomposition of polystyrene in supercritical methanol

(2008) Hee-Yong Shin et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Study on catalytic pyrolysis of polystyrene over base modified silicon mesoporous molecular sieve

(2007) Congxia Xie et al.   CATALYSIS COMMUNICATIONS

Thermal decomposition of expanded polystyrene in a pebble bed reactor to get higher liquid fraction yield at low temperatures

(2007) R.S. Chauhan et al.   WASTE MANAGEMENT